Feiss F1888/5ORB Installation guide

Feiss
Brand
Feiss
Model
F1888/5ORB
Type
Installation guide
(E) 03/04
ASSEMBLY INSTRUCTIONS FOR F1887/4, F1888/5
MURRAY FEISS
©MURRAY FEISS IMPORT CORP.
Fixture wire
and Ground Wire
Top Threaded Pipe
Fixture Loop
Bottom Arm
Bulb
(not included)
Candle Tube
Socket
Knurled
Cap Nut Screws
Cap Nut
Center Body
IMPORTANT
TURN OFF THE POWER
AT THE MAIN FUSE
OR CIRCUIT BREAKER
BOX BEFORE
STARTING INSTALLATION
Carefully unpack and identify 
all parts before assembly. Bulbs 
are not included.
1. Carefully thread fixture wire 
and ground wire through fixture 
loop. Screw fixture loop onto top 
threaded pipe until secure.
2. Spread open arms evenly. Align 
holes in bottom arms with holes 
in center body. Secure with 
knurled cap nut screws and
cap nuts.
3. Place candle tubes over 
candelabra sockets and screw 
bulbs (not included) into sockets 
to secure. See relamping label on 
candle tube for type and 
maximum allowed wattage.
4. Follow enclosed “Chain 
Suspended Fixture Installation 
Instructions” for electrical and 
fixture installation onto ceiling 
outlet box.
  • Page 1 1

Feiss F1888/5ORB Installation guide

Feiss
Brand
Feiss
Model
F1888/5ORB
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents