2. Bellaterra Home
  3. 210420
210420

Bellaterra Home 210420, 210419-BN, 210420-BN Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Bellaterra Home 210420 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FREESTANDING FAUCET
PREPARATION FOR INSTALLATION
ATTENTION! Dimensions may vary by up to 3/8". It is highly recommended to pull
all dimensions of actual model for installation and measuring purposes.
ATTENTION! Measurements in inches are rouned to the nearest 1/8".
TECHNICAL DATA
Max flow rate 2.5 GMP at 60 PSI
1
35 1/2"
34 3/8"
8 3/4"
2 7/8"
6"
6 7/8"
No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Component
Body
Screw
Canopy
Screw
Handle
Cap
Press Hat
Cartridge
Cartridge
Handle
Spray Head
Washer
Aerator
Aerator House
Flexible Hose
Flexible Hose
Take Over
Cover
Screw
Triangle Plank
TOOLS REQUIRED FOR INSTALLATION
OTHER TOOLS MAY BE REQUIRED
FREESTANDING FAUCET
PARTS & COMPONENTS
Basin Wrench Adjustable Wrench Teflon Tape Silicone Sealant Screwdriver
2
1
2
3
4
5
67
8
9
10
11
12
13
14
15
16
17
18
19
20
FREESTANDING FAUCET
INSTALLATION INSTRUCTIONS
Put the base cover over the pipe.
1
Screw the pipe to the base.
2
Install the flexible hose now and ensure the flexible hoses are
hand tightened into place.(DO NOT USE SPANNER TO
TIGHTEN AS IT CAN DAMAGE THE O-RING). The flexible
hoses are to be fitted into the correct inlets for hot water and
for cold water.
3
Fix the faucet body to the pipe.
4
Fix the screw position
5
Connect another side of the flexible hose to the water supply
pipe. Make sure they are to be fitted into the correct outlets
for hot water and cold water.
6
3
FREESTANDING FAUCET
Use the explosion screw to fix the base on the ground. and put
the base cover over the base.
7
The installation is completed.
Connect the shower hose and hand shower.
9
After installation is complete, remove Spray head and rotate
handle to the close position. Turn Water Supply Valves on, and
check all connections for leak. Flush faucet by running hot and
cold water in full position for one minute. Re tighten the
Aerator.
10
8
4
/