Getac V100M(52621253XXXX) User manual

Brand: Getac

Model: V100M(52621253XXXX)

Type: User manual

What’s the OEM Activation

The OEM Activation (previously known as System-Locked Pre-installation 2.0 or

SLP 2.0) is the mechanism used by the OEM computer manufacturers to factory

activate preinstalled Windows operating system on branded notebook so that activate

process of Windows Vista is done transparently and automatically once end-user first

starts the computer. The BIOS and OS have key and some secure information

respectively. OS will check the information and key via special security protocol, OS

is activated if they match each other

OS Windows is inactivation

The operating system Windows Vista / Windows 7 is from HDI or pre-installation OS.

You may meet the Windows Vista / Windows 7 is changed to inactivation and OS

Windows request you activate now. Please DO NOT change product key and follow

the procedure to re-activate OS again.

Step 1: To shutdown the system. Then, to power on the system.

Step 2: To run BIOS Setup Utility, press the F2 key when the prompt appears on the

screen during the system startup. The prompt shows up on the screen for only a few

seconds. You must press the F2 key quickly. The BIOS Setup Utility main screen

appears as shown next.

Step 3: Choose “Advanced” Menu, then choose “OEM Activation 2.x version” item,

the screen appear as show next:

If the original setting of OEM Activation 2.x version is OA 2.1, please select another

selection OA 2.0. Contrarily, if the original setting is OA 2.0, please select OA 2.1.

Step 4: To save the setting in BIOS Setup Utility.

Step 5: Reboot the system and enter the OS Windows.

1
2

Getac V100M(52621253XXXX) User manual

Brand: Getac

Model: V100M(52621253XXXX)

Type: User manual

Other documents