Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.
Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.
Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.
Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.
Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.
Insert small wood dowels (7) into slats (F,S,G) as shown in the diagram.
Insert small wood dowels (7) into slats (M,N) and ladder steps (Q) as shown in the diagram.
Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.
Secure legs (A,B) to slats (F,S,G) using joint connectors (3) as shown in the diagram,then
secure legs (A,C) to slats (F,S,G) using joint connectors (3) .
Secure legs (E,D) to slats (F,S,G) using joint connectors (3) as shown in the diagram.
Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.
Secure cross beams (I,K) to lower end frames using barrel nuts (8) and joint connectors (1)
as shown in the diagram.
Using the spacer (U) as a guide,secure slats (L) evenly spaced to the bed frame using large
wood screws (4) as shown in the diagram.
Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.
Secure cross beams (H,J) to upper end frames using barrel nuts (8) and joint connectors (1)
as shown in the diagram. Secure slats (M) to upper end frame using joint connectors (3)
as shown in the diagram. Please make sure the Warning Label must be face inside the bed
as shown in the diagram.
Using the spacer (U) as a guide,secure slats (L) evenly spaced to the bed frame using large
wood screws (4) as shown in the diagram.
Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.
Secure slats (N) to upper end frames using joint connectors (3) as shown in the diagram.
Secure support beams (R) to the slats using small screws (5) as shown in the diagram.
Secure ladder supports (O,P) to ladder steps (Q) using joint connectors (2) as shown in the
diagram.
Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.
Insert large wood dowels (6) into the lower bed frame posts and carefully lift and place the
upper bed frame into position over lower bed frame as shown in the diagram.
Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.
Secure ladder to the bed frame using joint connectors (2) as shown in the diagram.
Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.
Using the spacer (U) as a guide,secure slats (L) evenly spaced to the bed frame using large
wood screws (4) as shown in the diagram.
Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.
Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.
Lossen hardware and remove ladder fron the frame.
Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.
Lift and separate the upper bunk from the lower bunk.
Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.
Lossen hardware from guardrails and mattress support and remove them from the end
frames as shown in the diagram.
Using the spacer (U) as a guide,secure slats (L) evenly spaced to the bed frame using large
wood screws (4) as shown in the diagram.
Secure mattress support to the end frames using joint connectors (1) as shown in the diagram.
Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.
Using the spacer (U) as a guide,secure slats (L) evenly spaced to the bed frame using large
wood screws (4) as shown in the diagram.
/
