Elmer's 2031521 User manual

Elmer's Slime Instructions:

1. Find three different containers to mix your slime in.

2. To make slime for each of the glitter glues:

a. Pour out an entire bottle of (6 fl oz) Elmer’s Glitter Glue into a container.

b. Add ½ tbsp of baking soda and mix thoroughly.

c. Add 11/4 tbsp of contact lens solution.

d. Mix until mixture begins to get harder to mix and slime begins to form.

e. Take the slime out and begin kneading with both of your hands.

f. If it’s too sticky, continue adding ¼ tbsp contact lens solution and knead.

g. If needed, keep adding ¼ tbsp contact lens solution and kneading until desired consistency

and set aside.

3. Repeat step 2 for the other glitter glues colors.

4. Once all three slimes have been created, lay the three slimes on top of each other and begin to

knead and twist! If you knead too much, it will just become one color.

*Adult supervision is required; this project is not appropriate for children under the age of 3

years. Thoroughly wash your hands before and after making and playing with slime. Warning: If

large quantities of contact lens solution are accidentally ingested (greater than a tablespoon), get

medical attention immediately.

Slime should only be made under adult supervision and not by children under the age of 3. Slime

should never be ingested, should be discarded if it starts to change color or odor, and consumers

should always thoroughly wash their hands before and after playing with slime