Unbranded 10793478805600 Specification

Type
Specification
3" minimum overlap recommended
OUTSIDE LENGTH
add min.
1½"
to each
side
OUTSIDE WIDTH
1½" 1½"
Measure the width in 3 different places and
use the narrowest width.
Order blind width to the nearest 1/8" without
ordering wider than your window width.
Measure the length from the top of the
window opening to the top of the window sill.
Select the length (drop) closest to your
window length: Do not order blinds shorter
than your window opening.
Blinds are mounted inside
the window casing.
Use a metal measuring tape
(cloth tapes may stretch).
Blinds are mounted outside
the window casing.
Use a metal measuring tape
(cloth tapes may stretch).
Measure the exact width and length of the
entire area to be covered. For added light
control and privacy, we recommend you add
approximately 1½" on each side and approxi-
mately 3" for overall length.
Order the blind width to the nearest 1/8"
without ordering less than the area you
want to cover.
Select the length (drop) closest to the area
you want to cover:
Do not order blinds shorter than the area to
be covered.
Outside Mount
Measurement Guide
Inside Mount
INSIDE LENGTH
INSIDE WIDTH
INSIDE WIDTH
INSIDE WIDTH
  • Page 1 1

Unbranded 10793478805600 Specification

Type
Specification

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI