FSL144

Black & Decker FSL144, FSL12 User manual

  • Hello! I am an AI chatbot trained to assist you with the Black & Decker FSL144 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
2
English 5
Deutsch 9
Français 13
Italiano 16
Nederlands 20
Español 24
Português 28
Svenska 31
Norsk 35
Dansk 39
Suomi 43
EÏÏËÓÈη 47
Copyright Black & Decker
FSL12_EUR.PM5 06-12-2000, 12:152
5
ENGLISH
FLASHLIGHT FSL12/FSL144
CONGRATULATIONS!
You have chosen a Black & Decker tool. Our aim is
to provide quality tools at an affordable price.
We hope that you will enjoy using this tool for
many years.
INTENDED USE
Your Black & Decker flashlight FSL12/FSL144 has
been designed to provide additional lighting for
your DIY jobs. This tool is intended for consumer
use only.
SAFETY INSTRUCTIONS
Warning symbols
The following symbols are used in this manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Read the manual prior to operation.
Fire hazard.
Know your tool
Warning! When using battery-powered
tools, basic safety precautions,
including the following, should always
be followed to reduce the risk of fire,
leaking batteries, personal injury and
material damage.
Read all of this manual carefully before
operating the tool.
Retain this manual for future reference.
General
1. Use appropriate tool
The intended use is described in this
instruction manual. Warning! The use of any
accessory or attachment or performance of any
operation with this tool other than those
recommended in this instruction manual may
present a risk of personal injury.
2. Check for damaged parts
Before use, carefully check the tool for
damage. Ensure that the tool will operate
properly and perform its intended function.
Do not use the tool if any part is damaged or
defective. Have any damaged or defective
parts repaired or replaced by an authorised
repair agent. Never attempt any repairs
yourself. Do not use the tool if the switch does
not turn it on and off.
3. Remove the battery
Remove the battery when the tool is not in use,
before changing any parts of the tool,
accessories or attachments and before servicing.
4. Store idle tools
When not in use, tools, batteries and chargers
should be stored in a dry, locked up or high
place, out of reach of children.
5. Repairs
This tool complies with relevant safety
requirements. Repairs should only be carried
out by qualified persons using original spare
parts; otherwise this may result in considerable
danger to the user.
Additional safety instructions for batteries
Never attempt to open for any reason.
Do not expose to water.
Do not store in locations where the
temperature may exceed 40 °C.
Charge only using the charger provided with
the tool.
Charge only at ambient temperatures between
4 °C and 40 °C.
FSL12_EUR.PM5 06-12-2000, 12:155
6
ENGLISH
Before charging, make sure that the battery is
dry and clean.
Use only the correct type of battery for the tool
(see technical data).
When disposing of batteries, follow the
instructions given in the section “Protecting
the environment”.
Under extreme conditions, battery leakage
may occur. When you notice liquid on the
battery, proceed as follows:
- Carefully wipe the liquid off using a cloth.
Avoid skin contact.
- In case of skin or eye contact, follow the
instructions below.
The battery fluid, a 25-30% solution of
potassium hydroxide, can be harmful.
In case of skin contact, immediately rinse
with water. Neutralise with a mild acid
such as lemon juice or vinegar. In case of
eye contact, rinse abundantly with clean
water for at least 10 minutes. Consult a
physician.
Fire hazard! Avoid short-circuiting the
contacts of a detached battery (e.g. when
storing the battery in a toolbox).
Do not incinerate the battery.
Do not attempt to charge damaged
batteries.
Additional safety instructions for flashlights
Never look directly into the light beam.
Do not touch the bulb shortly after using the
flashlight, as the bulb may be hot.
Use only the appropriate type of replacement
bulbs.
OVERVIEW (fig. A)
1. On/off switch
2. Lens holder
3. Carrying strap
4. Battery
5. Battery release buttons
ASSEMBLY
Fitting and removing the battery (fig. A)
To fit the battery (4), line it up with the
receptacle on the tool. Slide the battery into
the receptacle and push until the battery snaps
into place.
To remove the battery, push the two release
buttons (5) simultaneously while at the same
time pulling the battery out of the receptacle.
USE
Switching on and off (fig. A)
To switch the tool on, press the on/off switch (1).
To switch the tool off, press the on/off switch
again.
Adjusting the light beam (fig. A)
Turn the lens holder (2) to adjust the light
beam as required.
MAINTENANCE
Your Black & Decker tool has been designed to
operate over a long period of time with a
minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and
regular cleaning. Your charger does not require
any maintenance apart from regular cleaning.
Before performing any maintenance on
the tool, remove the battery from
the tool.
Unplug the charger before cleaning it.
Replacing the bulb (fig. B)
The bulb can be easily replaced.
Do not touch the bulb shortly after using
the flashlight, as the bulb may be hot.
Remove the battery.
Remove the lens holder (2) by turning
counterclockwise.
Remove the retaining collar (6) by turning it
slightly and pulling it of the bulb fitting.
Pull the bulb (7) out of the fitting.
FSL12_EUR.PM5 06-12-2000, 12:156
7
ENGLISH
Insert a new bulb.
Re-fit the retaining collar and lens holder.
PROTECTING THE ENVIRONMENT
Tools
Should you find one day that your tool
needs replacement, or if it is of no further
use to you, think of the protection of the
environment. Black & Decker repair agents
will accept old Black & Decker tools and
ensure that they are disposed of in an
environmentally safe way.
Batteries
Cd
Black & Decker batteries can be recharged
many times. At the end of their useful life,
discard batteries with due care for our
environment:
Run the battery down completely, then remove
it from the tool.
NiCd and NiMH batteries are recyclable. Take
them to your service agent or a local recycling
station. Collected batteries will be recycled or
disposed of properly.
Technical data
FSL12 FSL144
Voltage V
DC
12 14.4
Battery cat. no. A9275 A9276
Bulb part no. 429881-01 429881-01
Weight (without battery) kg 0.3 0.3
GUARANTEE (UK, SOUTH AFRICA,
AUSTRALIA AND NEW ZEALAND ONLY)
Should your Black & Decker product become
defective due to faulty materials or workmanship,
within 24 months from the date of purchase,
we guarantee to either replace all defective parts
or -at our discretion- to replace the unit free of
charge, provided that:
The product is returned to us or one of our
authorised repair agents with proof of purchase.
The product has not been used for trade,
professional or hire purposes.
The product has not been subjected to misuse
or neglect.
The product has not sustained any damage
through foreign objects, substances or accidents.
Repairs have not been attempted by anyone
other than our service staff or authorised repair
agents.
This guarantee is offered as an extra benefit and
does not affect your statutory rights.
AFTER SALES SERVICE
(UK, SOUTH AFRICA, AUSTRALIA AND
NEW ZEALAND ONLY)
Black & Decker offers a nationwide network of
authorised repair agents. The use of other than
genuine Black & Decker parts and accessories may
reduce the performance of the tool and cause
personal injury and material damage. The terms
and conditions of the warranty could also be
rendered void.
OUR AFTER SALES SERVICE POLICY
(UK, AUSTRALIA AND
NEW ZEALAND ONLY)
Full details on our after-sales service are available
on the Internet at www.2helpU.com. Alternatively,
contact our Service and Information Centre at the
address towards the back of this manual.
It is our aim that all Black & Decker customers
should be totally satisfied with their
Black & Decker product and our after sales service.
If any help or advice is needed, please contact
your local Black & Decker repair agent.
If your product needs repair, please take or send it
to an authorised repair agent, providing proof of
purchase if claiming a guarantee repair.
OTHER DIY TOOLS
Black & Decker has a full range of tools that make
DIY jobs easy. If you would like further information
on the following products, please contact our
Service and Information Centre (see the address
page towards the end of this manual) or your local
Black & Decker retailer.
FSL12_EUR.PM5 06-12-2000, 12:157
8
ENGLISH
Drills Cordless screwdrivers
Cordless drills/screwdrivers Sanders
Jigsaws Circular saws
Mitre saws Angle grinders
Planers Routers
Paint strippers Workbenches
Corded and cordless multi-purpose tools
We also have a wide range of accessories for the
above tools.
Not all products are available in all countries.
FSL12_EUR.PM5 06-12-2000, 12:158
55
verktøj?
Onko tämä ensimmäinen
B&D-koneesi?
E›Ó·È ÙÔ ÂÚÁ·Ï›Ô
·˘Ùfi Ë ÚÒÙË Û·˜ ·ÁÔÚ¿?
Yes
Ja OuiSi Ja
Sim
Ja Ja Ja Kyllä
¡·È
No
Nein Non No
Nee
No
Não Nej Nei
Nej
Ei
√¯È
Dealer address
Händleradresse
Cachet du revendeur
Indirizzo del
rivenditore
Adres van de dealer
Dirección del detallista
Morada do
revendedor
Återförsäljarens adress
Forhandlerens adresse
Forhandler
adresse
Jälleenmyyjän osoite
¢È‡ı˘ÓÛË ·ÓÙÈÚÔÛÒÔ˘
............................................................
............................................................
Cat. no.:
Is this tool a gift?
Ist dieses Gerät
ein Geschenk?
S’agit-il d’un cadeau?
Si tratta di un regalo?
Kreeg u de
machine als cadeau?
¿Ha recibido
usted esta herramienta como regalo?
Recebeu esta ferramenta como
presente?
Är verktyget en gåva?
Er verktøyet en gave?
Er verktøjet
en gave?
Onko kone lahja?
∆Ô ÂÚÁ·ÏÂ›Ô Â›Ó·È ‰ÒÚÔ?
Yes
Ja OuiSi Ja
Sim
Ja Ja Ja Kyllä
¡·È
No
Nein Non No
Nee
No
Não Nej Nei
Nej
Ei
√¯È
Is this tool your first purchase?
Ist
dieses Gerät ein Erstkauf?
Est-ce un
1er achat?
Questo prodotto è il suo
primo acquisto?
Is deze machine uw
eerste aankoop?
¿Es esta
herramienta la primera de este tipo?
Esta ferramenta é a sua primeira
compra?
Är detta ditt första B&D-
verktyg?
Er dette ditt første B&D
verktøy?
Er dette dit første B&D
Dealer address Date of purchase
Händleradresse Kaufdatum
Cachet du revendeur Date d’achat
Indirizzo del rivenditore Data d’acquisto
Adres van de dealer Aankoopdatum
Dirección del detallista Fecha de compra
Morada do revendedor Data de compra
Återförsäljarens adress Inköpsdatum
Forhandlerens adresse Innkjøpsdato
Forhandler adresse Indkøbsdato
Jälleenmyyjän osoite Ostopäivä
¢È‡ı˘ÓÛË ·ÓÙÈÚÔÛÒÔ˘ ∏ÌÂÚÔÌËÓ›· ·ÁÔÚ¿˜
Name
Name Nom Nome
Naam
NombreNome
Namn
Navn
Navn Nimi √ÓÔÌ·:
............................................................
Address
AdresseAdresse
Indirizzo
AdresDirección
Morada
Adress
AdresseAdresse
Osoite
¢È‡ı˘ÓÛË:
............................................................
............................................................
Town
OrtVilleCittáPlaats
Ciudad
LocalidadeOrt
ByBy
Paikkakunta
¶fiÏË:
............................................................
Postal code
Postleitzahl
Code
postal
Codice postalePostcode
Código
Código postalPostnr.
Postnr.
Postnr.Postinumero
∫ˆ‰ÈÎfi˜
............................................................
Data protection act: Tick the box if
you prefer not to receive further
information. Bitte ankreuzen, falls Sie
keine weiteren Informationen erhalten
möchten.
Si vous ne souhaitez pas
recevoir d’informations, cochez cette
case. Barrate la casella se non
desiderate ricevere informazioni.
A.u.b. dit vakje aankruisen indien u
geen informatie wenst te ontvangen.
Señale en la casilla sino quiere recibir
información.
Por favor, assinale com
uma cruz se não desejar receber
informação.
Vänligen kryssa för i
rutan om Ni inte vill ha information.
Vennligst kryss av dersom du ikke
ønsker informasjon.
Venligst sæt
kryds i ruden såfremt De ikke måtte
ønske at modtage information.
Merkitkää rasti ruutuun, mikäli ette
halua vastaanottaa informaatiota.
¶·Ú·Î·Ï›ÛÙ ӷ ÛËÌÂÈÒÛÂÙ ¿Ó
‰ÂÓ ı¤ÏÂÙ ӷ ¿ÚÂÙ ÏËÚÔÊÔڛ˜.
FSL12_EUR.PM5 06-12-2000, 12:1755
56
GUARANTEE CARD
GARANTIEKARTE
CARTE DE GARANTIE
TAGLIANDO DI GARANZIA
GARANTIEKAART
TARJETA DE GARANTÍA
CARTÃO DE GARANTIA
GARANTIBEVIS
GARANTI KORT
GARANTI KORT
TAKUUKORTTI
∫∞ƒ∆∞ E°°À∏™∏™
Español Después de haber comprado su herramienta envíe
usted, por favor, esta tarjeta a la central de
Black & Decker en su país.
Português Por favor, recorte esta parte, coloque-a num envelope
selado e endereçado e envie-o logo após a compra do
seu produto para o endereço da Black & Decker do
seu país.
Svenska Var vänlig klipp ur denna del och sänd den i ett frankerat
kuvert till Black & Deckers adress i Ditt land.
Norsk Vennligst klipp ut denne delen umiddelbart etter du
har pakket ut ditt produkt og legg det i en adressert
konvolutt til Black & Decker (Norge) A/S.
Dansk Venligst klip denne del ud og send frankeret til
Black & Decker i dit land.
Suomi Leikkaa irti tämä osa, laita se kuoreen ja postita kuori
paikalliseen Black & Decker osoitteeseen.
EÏÏËÓÈη ¶·Ú·Î·ÏÒ Îfi„ÂÙ ·˘Ùfi ÙÔ ÎÔÌÌ¿ÙÈ Î·È Ù·¯˘‰ÚÔÌ‹Û·ÙÂ
ÙÔ ·Ì¤Ûˆ˜ ÌÂÙ¿ ÙËÓ ·ÁÔÚ¿ ÙÔ˘ ÚÔ˚fiÓÙÔ˜ Û·˜ ÛÙËÓ
‰È‡ı˘ÓÛË Ù˘ Black & Decker ÛÙËÓ EÏÏ¿‰·.
English Please complete this section immediately after the
purchase of your tool and send it to Black & Decker in
your country. If you live in Australia or New Zealand,
please register by using the alternative guarantee card
supplied.
Deutsch Bitte schneiden Sie diesen Abschnitt ab, stecken ihn in
einen frankierten Umschlag und schicken ihn an die
Black & Decker Adresse Ihres Landes.
Français Découpez cette partie et envoyez-la sous enveloppe
timbrée à l’adresse de Black & Decker dans votre pays,
ceci immédiatement après votre achat.
Italiano Per favore ritagliate questa parte, inseritela in una
busta con francobollo e speditela subito dopo
l’acquisto del prodotto all’indirizzo della
Black & Decker nella vostra nazione.
Nederlands Knip dit gedeelte uit en zend het direct na aankoop in
een gefrankeerde, geadresseerde envelop naar het
adres van Black & Decker in uw land.
FSL12_EUR.PM5 06-12-2000, 12:1756
/