DCS-6112

D-Link DCS-6112, DCS-3010 User manual

  • Hello! I am an AI chatbot trained to assist you with the D-Link DCS-6112 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
User Manual
HD PoE Fixed Network Camera
DCS-3010
2D-Link DCS-3010 User Manual
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or
organization of such revisions or changes.
Manual Revisions
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or
other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective
companies.
Copyright © 2013 by D-Link Corporation.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link
Corporation.
Revision Date Description
1.1 January 11, 2013 DCS-3010 Revision A1 with rmware version 1.10
Preface
3D-Link DCS-3010 User Manual
Table of Contents
Product Overview ........................................................ 4
Package Contents ................................................... 4
System Requirements ............................................. 5
Introduction ..............................................................6
Features .................................................................. 7
Hardware Overview ................................................. 8
Front Panel ........................................................ 8
Rear Panel ......................................................... 9
Side Panel ....................................................... 10
Side Panel ....................................................... 10
Button Panel ....................................................11
Installation ..................................................................12
Hardware Installation .............................................12
Conguration with Wizard ...................................... 13
Viewing Camera via Web Browser ............... 18
D-ViewCam Setup Wizard ...............................20
Conguration ............................................................. 22
Live Video ..............................................................22
Client Setup ...........................................................26
Setup ..................................................................... 27
Basic Setup ......................................................27
Advanced Setup .............................................. 28
System Overview ................................................... 29
Video ................................................................30
Video Settings ............................................... 30
Image Settings .............................................. 33
Audio Settings ............................................... 35
Network ............................................................36
IP Settings ..................................................... 36
Port and Access Name Settings ................... 39
Dynamic DNS ............................................... 42
HTTPS .......................................................... 43
Access List .................................................... 45
Advanced Settings ........................................ 47
Event Management ..........................................51
Motion Detection ........................................... 51
Tamper Detection ......................................... 52
Event Settings ............................................... 53
Recording ........................................................ 60
Recording Settings ........................................ 60
Local Storage ................................................ 62
PTZ Control ..................................................... 63
Digital PTZ .................................................... 63
System ............................................................. 64
User Settings ................................................ 64
Device Settings ............................................. 65
Time and Date .............................................. 66
Maintenance ................................................. 67
Parameter List ............................................... 69
Logs .............................................................. 70
Appendix A - Technical Specications ................... 71
Technical Specications ........................................ 71
4D-Link DCS-3010 User Manual
Product OverviewProduct Overview
If any of the above items are missing, please contact your reseller.
DCS-3010
HD PoE Fixed Network
Camera
Mounting Bracket
Power Adapter CAT5 Ethernet Cable
User Manual and Software
on CD-ROM
Quick Install Guide
FULL HD DAY & NIGHT
DCS-3715
Ver. 1.00(WW)
©
2
0
1
0
D
-
L
i
n
k
C
o
r
p
o
r
a
t
i
o
n
/
D
-
L
i
n
k
S
y
s
t
e
m
s
,
I
n
c
.
A
l
l
R
i
g
h
t
s
R
e
s
e
r
v
e
d
.
Package Contents
Accessory wrench and
lens ring xture
5D-Link DCS-3010 User Manual
Product Overview
System Requirements
Operating System: Microsoft Windows
®
, 2000, XP, Vista, 7
Memory : At least 256MB of memory (512MB recommended)
Web Browser: Internet Explorer 7 or higher, Firefox, Chrome, Safari
VGA card resolution: SVGA or XGA (1024x768 or above)
CPU: 1.7GHz or above (2.8GHz plus processor with 512MB memory and a 32MB video card is
required for multiple camera viewing and recording in IP surveillance program)
An available Ethernet connection
6D-Link DCS-3010 User Manual
Product Overview
Introduction
DCS-3010 is a HD, full frame rate network camera with H.264 compression. The DCS-3010 connects to a network to provide high-
quality live video over the Internet. With the vivid video quality and superb high resolution, it can provide most detail of the video which
is useful to identify any suspected object. DCS-3010 provides multiple streaming and exible viewing window settings for different
purpose of surveillance, either for regular recording or mobile view. Built-in SD card slot can record important events in SD card as a
local backup and it's very easy to retrieve.
The included D-Link D-ViewCam™ is sophisticated software which allows users to manage up to 32 network cameras, set e-mail alert
notications, create recording schedules, and use motion detection to record directly to a hard drive. D-ViewCam™ also allows users to
upload a oor plan to create a realistic layout of the premises where cameras are located, further simplifying the management process.
7D-Link DCS-3010 User Manual
Product Overview
Features
HD Surveillance
DCS-3010 provides HD industral standard 16:9 wide screen video for IP surveillance. With the xed lens, it is a high performance high
quality network camera. To utilize the advantage of high resolution, the "viewing window" design can provide user a exible settings to
monitor multiple ROI(Region of Interest) by a single camera. And the "ePTZ" can also simulate wide area surveillance by digital zoom
and pan, tilt control.
Flexible Connectivity
The DCS-3010 incorporates Power over Ethernet (PoE), allowing it to be easily installed in a variety of locations without the need for
supplemental power cabling.
Advanced Web User Interface
The DCS-3010 features D-Link’s latest-generation graphical user interface. This freshly-designed web interface features a clean,
compact, and professional home screen which dramatically increases usability. Menu navigation is simplied thanks to a tree view
which logically groups functions, helping users to quickly nd what they need. Likewise, intuitive graphic icons reduce the amount
text and clutter within the browser window. New users will appreciate the convenient contextual help which offers an easy way to nd
assistance with camera management tasks.
3GPP Mobile Surveillance
Support for 3GPP Mobile Surveillance allows users to view a live video feed from a 3GPP compatible Internet-ready mobile device.
This extends monitoring capability, allowing users to check the camera’s video feed while on the go without a computer.
8D-Link DCS-3010 User Manual
Product Overview
Hardware Overview
Front Panel
Lens Connector
Connect to a CS mount
Built-in MIC
Internal microphone
9D-Link DCS-3010 User Manual
Product Overview
Rear Panel
Ethernet (PoE)
RJ-45 connector for Ethernet
which can also be used to power
the camera using PoE
Microphone Port
Use to Connect an
External microphone
Reset
Press and hold this button
for 10 seconds to reset the
camera
Speaker Port
Use to Connect an
External speaker
DC Power
12V DC
LED
Power and
network indicator
1.25A
10D-Link DCS-3010 User Manual
Product Overview
Side Panel
Side Panel
Micro SD Card Slot
Local Micro SD card for storing
recorded images and video
11D-Link DCS-3010 User Manual
Product Overview
Button Panel
DC-Iris Connector
Connector for DC auto iris lens
12D-Link DCS-3010 User Manual
InstallationInstallation
Hardware Installation
Basic Connection (without PoE)
Connect the camera to your switch or router via Ethernet cable.
Connect the supplied power cable from the camera to a power outlet.
Connection Using a PoE Switch
If using a PoE switch or router, connect the network camera via Ethernet
cable.
PoE will transmit both power and data over a single cable.
Note: Once power has been established, the LED will turn red. When the device has obtained an IP address and is accessible, the
LED will turn green.
13D-Link DCS-3010 User Manual
Installation
Conguration with Wizard
Click Setup Wizard to begin the installation.
Insert the DCS-3010 CD into your computer's CD-ROM drive to begin the
installation. If the Autorun function on your computer is disabled, or if the
D-Link Launcher fails to start automatically, click Start > Run. Type D:\
autorun.exe, where D: represents the drive letter of your CD-ROM drive.
After clicking Setup Wizard, the following window will open.
Click Next to continue.
14D-Link DCS-3010 User Manual
Installation
Click Yes to accept the License Agreement.
To start the installation process, click Next.
Note: The installation may take several minutes to nish.
15D-Link DCS-3010 User Manual
Installation
Click Finish to complete the installation.
Click on the D-Link Setup Wizard SE icon that was created in your Windows
Start menu.
Start > D-Link > Setup Wizard SE
16D-Link DCS-3010 User Manual
Installation
Enter the Admin ID and password. When logging in for the rst time, the
default Admin ID is admin with the password left blank.
Click Next, to proceed to the next page.
The Setup Wizard will appear and display the MAC address and IP address
of your camera(s). If you have a DHCP server on your network, a valid IP
Address will be displayed. If your network does not use a DHCP server, the
network camera's default static IP 192.168.0.20 will be displayed.
Click the Wizard button to continue.
17D-Link DCS-3010 User Manual
Installation
Take a moment to conrm your settings and click Restart.
Select DHCP if your camera obtains an IP address automatically when it boots
up. Select static IP if the camera will use the same IP address each time it is
started.
Click Next, to proceed to the next page.
18D-Link DCS-3010 User Manual
Installation
Click on the D-Link Setup Wizard SE icon that was created in your Windows
Start menu.
Start > D-Link > Setup Wizard SE
Viewing Camera via Web Browser
Select the camera and click the button labeled "Link" to access the web
conguration.
The Setup Wizard will automatically open your web browser to the IP address
of the camera.
19D-Link DCS-3010 User Manual
Installation
This section shows your camera’s live video. You can select your video
prole and view or operate the camera. For additional information about web
conguration, please refer to the user manual included on the CD-ROM or the
D-Link website.
Enter admin as the default username and leave the password blank. Click OK
to continue.
20D-Link DCS-3010 User Manual
Installation
D-ViewCam Setup Wizard
D-ViewCam software is included for the administrator to manage multiple
D-Link IP cameras remotely. You may use the software to congure all
the advanced settings for your cameras. D-ViewCam is a comprehensive
management tool for IP surveillance.
Insert the CD-ROM into the CD-ROM drive. A menu screen will appear as
shown below.
Follow the Installation Wizard to install D-ViewCam.
/