Sony KDL-22L5000 User manual

LCD Digital

Color TV

Operating Instructions

Sony Customer Support

U.S.A.: www.sony.com/tvsupport

Canada: www.sony.ca/support

United States

1.800.222.SONY

Canada

1.877.899.SONY

Please Do Not Return

the Product to the Store

KDL-37L5000

KDL-32L5000

KDL-26L5000

KDL-22L5000

2

CAUTION

To prevent electric shock and blade exposure, do not use

this polarized AC plug with an extension cord, receptacle or

other outlet unless the blades can be fully inserted.

❑ Operate the TV only on 120-240 V AC.

Licensing Information

Macintosh is a trademark of Apple Inc., registered in the U.S. and

other countries.

HDMI, the HDMI logo and High-Definition Multimedia Interface

are trademarks or registered trademarks of HDMI Licensing, LLC.

Fergason Patent Properties, LLC:

U.S. Patent No. 5,717,422

U.S. Patent No. 6,816,141

Manufactured under license from Dolby Laboratories. Dolby and

the double-D symbol are trademarks of Dolby Laboratories.

Blu-ray Disc is a trademark.

“BRAVIA”, , BRAVIA Sync, and are trademarks or

registered marks of Sony Corporation.

“PlayStation” is a registered trademark and “PS3” is a trademark of

Sony Computer Entertainment Inc.

Your BRAVIA TV is ENERGY STAR

®

qualified

in the “Home” mode.

It meets strict energy efficiency guidelines set by

the U.S. Environmental Protection Agency and

Department of Energy. ENERGY STAR is a joint

program of these government agencies, designed

to promote energy efficient products and

practices.

❑ When the TV is initially set up, it is designed to meet

ENERGY STAR requirements.

❑ Changes to certain features, settings, and functionalities of

this TV (i.e. Picture/Sound, Power Savings) can slightly

change the power consumption.

Depending upon such changed settings, the power consumption

may increase which possibly could exceed the limits required for the

ENERGY STAR qualification.

Compatible Wall Mount Bracket Information

Use the following Sony WALL-MOUNT BRACKET with

your TV model.

Use with other WALL-MOUNT BRACKETS may cause

instability and could result in property damages or injury.

Cleaning

When cleaning, be sure to unplug the power cord to avoid

any chance of electric shock.

• Wipe the LCD screen gently with a soft cloth.

• Stubborn stains may be removed with a cloth slightly

moistened with a solution of mild soap and warm water.

• If using a chemically pretreated cloth, please follow the

instruction provided on the package.

• Never use strong solvents such as a thinner, alcohol or

benzine for cleaning.

• See the supplied Safety Booklet for additional

information.

Owner’s Record

The model and serial numbers are located at the rear of the TV.

Record these numbers in the spaces provided below. Refer to

them whenever you call upon your Sony dealer regarding this

TV.

Model Name

Serial No.

Sony TV Model No.

KDL-22L5000

KDL-26L5000

KDL-32L5000

KDL-37L5000

Sony

Wall-Mount

Bracket Model

No.

SU-WL100 SU-WL500

This manual is for the 22 class, 26, 32 class, and 37 inch BRAVIA KDL-L5000 series models with screen size measured diagonally. The

22 class has a 21.6 inch viewable image size and the 32 class has a 31.5 inch viewable image size (measured diagonally).

3

Contents

Introducing Your New BRAVIA

®

Welcome to the World of BRAVIA

®

. . . . . . . . .4

Experiencing Stunning HD with Your

BRAVIA . . . . . . . . . . . . . . . . . . . . . . . . . . .4

The Four Steps to a Stunning HD

Experience . . . . . . . . . . . . . . . . . . . . . . . . .5

TV Feature Highlights . . . . . . . . . . . . . . . . . . .5

Getting Started

Setting Up Your TV . . . . . . . . . . . . . . . . . . . . .6

Locating Inputs and Outputs . . . . . . . . . . . . . .7

Adjusting the viewing angle of the TV. . . . . . .8

Connecting the TV . . . . . . . . . . . . . . . . . . . . .9

Connecting Other Equipment . . . . . . . . . . . .12

Bundling the Connecting Cables. . . . . . . . . .13

When Installing the TV Against a Wall or

Enclosed Area . . . . . . . . . . . . . . . . . . . . .13

Securing the TV . . . . . . . . . . . . . . . . . . . . . .14

Running Initial Setup. . . . . . . . . . . . . . . . . . .16

Operating the TV

Using the Remote Control. . . . . . . . . . . . . . .17

Remote Control Button Description . . . . . . .18

TV Controls and Indicators . . . . . . . . . . . . . .20

Using Features

Using BRAVIA Sync with Control for

HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Using PIP Feature. . . . . . . . . . . . . . . . . . . . .22

Favorites . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Wide Mode . . . . . . . . . . . . . . . . . . . . . . . . . .23

Wide Mode with PC . . . . . . . . . . . . . . . . . . .23

Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Using the Menus

Navigating through TV Menus . . . . . . . . . . .25

Using the Picture Settings. . . . . . . . . . . . . . .26

Using the Sound Settings . . . . . . . . . . . . . . .27

Using the Screen Settings . . . . . . . . . . . . . .28

Using the Channel Settings . . . . . . . . . . . . .30

Using the Parental Lock Settings . . . . . . . . .31

Using the Setup Settings . . . . . . . . . . . . . . .34

Other Information

PC Input Signal Reference Chart for

PC and HDMI IN 1/2/3 . . . . . . . . . . . . . . .37

Preparing the TV for Wall-Mounting . . . . . . .38

Troubleshooting . . . . . . . . . . . . . . . . . . . . . .39

Important Notices . . . . . . . . . . . . . . . . . . . . .43

Specifications . . . . . . . . . . . . . . . . . . . . . . . .44

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Customer Support

United States

http://www.sony.com/tvsupport

Canada

http://www.sony.ca/support

On-line Registration

United States

http://productregistration.sony.com

Canada

http://www.SonyStyle.ca/registration

4

Introducing Your New BRAVIA

®

Welcome to the World of BRAVIA

®

Thank you for choosing this Sony

BRAVIA

®

high-definition television. Use the

documentations listed below to get the most out of your TV.

Experiencing Stunning HD with Your BRAVIA

The quality of the image you see on your BRAVIA

TV is only as good as the quality of the

signal it receives. To experience the stunning detail of your new

BRAVIA

TV, you need

access to HD programming. Your

BRAVIA

TV can receive and display HD programming

from:

• Over-the-air broadcasting via HD-quality antenna

• HD cable subscription

• HD satellite subscription

• Blu-ray Disc™ player or other HD compatible external equipment

Contact your cable or satellite provider for information on upgrading to HD programming.

Safety Booklet

Contains precautionary

measures to keep you and

your TV safe. Read this

information prior to setting up

your TV.

Quick Setup Guide

Provides TV setup information with sample

connection diagrams and TV features.

Operating Instructions

Provides the most detailed

information to operate your

TV.

Introducing Your New BRAVIA

®

5

The Four Steps to a Stunning HD Experience

Set, Sound, Source, and Setup

Along with your BRAVIA TV set, a complete HD system requires an HD sound system, a

source of HD programming, and a proper connection setup. Refer to the Quick Setup

Guide, enclosed separately, for connecting optional equipment.

TV Feature Highlights

Yo u r BRAVIA comes with many convenient features, such as:

➢ BRAVIA

®

Sync

TM

: Allows your BRAVIA TV to communicate with other Sony

equipment supporting the Control for HDMI function (page 21).

➢ PIP (Picture in Picture): You can work on your PC and watch your favorite TV

program simultaneously (page 22).

➢ Favorites: Your favorite channels and inputs are at your finger tips for easy

access (page 22).

➢ Auto Wide Mode: Set your TV to automatically adjust the screen based on the

signal resolution (page 23).

➢ Input Selection: Allows you to easily switch between the connected equipment

(page 24).

You can enjoy crisp, clear images, smooth

movement, and high-impact visuals from

1080 HD signals as shown here.

When you compare a high-definition signal

to a standard analog signal, you will notice

a big difference in picture quality. If black

bars appear as shown here, press WIDE

on the remote control to fill the screen.

6

Getting Started

Setting Up Your TV

The TV is packaged with a detached Table-Top Stand so you can mount the TV to a wall right

away. If you are not mounting the TV to a wall, you will need to attach the Table-Top Stand. Use a

Philips screwdriver and the supplied screws to complete the task. Look for the attachment

instruction taped to the TV unit.

Be sure to consider the following while setting up your TV:

• Disconnect all cables when carrying the TV.

• Carry the TV with the adequate number of people; larger size TVs require two or more people.

• Placement of the hands carrying the TV is very important for safety and to avoid damage.

• Adequate ventilation is necessary (see page 13).

• For best picture quality, do not expose the screen to direct illumination or sunlight.

• Avoid installing the TV in a room with reflective wall and floor materials.

• Avoid moving the TV from a cold area to a warm area. Sudden room temperature changes may

cause moisture condensation. This may cause the TV to show poor picture and/or poor color.

Should this occur, allow moisture to evaporate completely before powering on the TV.

KDL-26L5000/KDL-32L5000/KDL-37L5000

KDL-22L5000

• For additional safety information, read the supplied Safety and Regulatory Booklet.

• When cable connection is completed, be sure to secure the TV to a stable surface or mount it to a

wall. The designated Sony wall-mount bracket model is available on page 2 of this manual. For

details on securing the TV and items listed above, see page 14.

Getting Started

7

Locating Inputs and Outputs

Item Description

1 SERVICE This port is for service only.

2 HDMI IN 1/2/3

L-AUDIO-R

HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-

digital audio/video interface between this TV and any HDMI-equipped audio/video

equipment, such as a set-top box, DVD player, and A/V receiver. HDMI supports

enhanced, or high-definition video, plus digital audio. Be sure to use only an HDMI

cable that bears the HDMI logo.

Use the HDMI IN 1 port when connecting DVI equipment. Use a DVI-to-HDMI

cable or adapter (not supplied). Equipment using a DVI connection also requires an

additional audio connection using an audio cable connected to AUDIO (L/R).

3 VIDEO IN 2

S VIDEO

VIDEO/L

(MONO)-

AUDIO-R

Connects to the S VIDEO output jack of video equipment. If both composite video

and S VIDEO are connected, S VIDEO signal has priority.

If you have mono equipment, connect its audio output port to the TV’s L (MONO)

audio input port. Use VIDEO IN 2 with AUDIO L (mono) and R.

4 PC IN

(RGB/AUDIO)

Connects to a personal computer’s video and audio output connector. Can also be

connected to other analog RGB equipment. See “PC Input Signal Reference Chart”

on page 37 for the signals that can be displayed.

For some Apple Macintosh computers, it may be necessary to use an adapter (not

supplied). If an adapter is used, connect the adapter to the computer before

connecting the HD15-HD15 cable.

You may need to adjust the TV settings or your PC’s resolution and timing. See

page 11 for information on how to setup your PC to this TV.

5 DIGITAL AUDIO

OUT (OPTICAL)

Connects to the optical audio input of a digital audio equipment that is

PCM/Dolby* Digital compatible.

* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby

Laboratories.

SERVICE

ONLY

AUDIO

R

VIDEO

(MONO)

L

IN

VIDEO IN

2

S VIDEO

2

1

3

P

R

P

B

Y

VIDEO

RGB

(MONO)

VIDEO IN

AUDIO

L

PC IN

DIGITAL

AUDIO

OUT

(OPTICAL)

AUDIO

L

R

AUDIO

R

IN

AUDIO

OUT

(FIX)

COMPONENT IN

(1080p/1080i/

720p/480p/480i)

1

1 2

3

CABLE/ANTENNA

4

5

67

8

2

9

0

Side Panel Rear Panel

(Continued)

8

Adjusting the viewing angle of the TV

KDL-22L5000 only

This TV can be adjusted within the angle shown below.

Adjust the angle back and forth (tilt)

6

VIDEO IN 1/

COMPONENT

IN 1

(1080p/1080i/

720p/480p/480i)/

L (MONO)-

AUDIO-R

This input port can be used as a composite video input (VIDEO 1) or as a

component video input (COMPONENT 1). For composite use, connect the yellow

jack to Y/Video for video and use audio L (mono) and R for audio signal. For

component connection, use Y, P

B

, P

R

for video signals and also connect the audio L

(mono) and R for audio signal.

This TV can auto detect and switch between the VIDEO 1 and COMPONENT 1

when VIDEO 1 or COMPONENT 1 is connected.

To set to auto detection, press MENU and go to the Setup settings. Select the

Video/Component 1 Selection option then set to Auto.

7

COMPONENT

IN 2

(1080p/1080i/

720p/480p/480i)/

L-AUDIO-R

Component video provides better picture quality than the S Video and composite

video.

Audio connection is required for the COMPONENT IN ports, connect audio (L/R).

8 AUDIO OUT

(FIX) L/R

Connects to the left and right audio input jacks of your analog audio equipment.

You can use these outputs to listen to your TV’s audio through your stereo system.

9 AC power cord Plug the cord into the nearest wall outlet.

0 CABLE/

ANTENNA

RF input that connects to your Cable or VHF/UHF antenna.

Item Description

3˚ 8˚

Right view

Front

• An HDMI or Component video (YP

B

P

R

) connection is required to view 480i, 480p, 720p, 1080i

and 1080p video formats. 1080/24p is available only with HDMI connection. This TV displays all

picture format types in a resolution of 1,366 dots × 768 lines.

Getting Started

9

Connecting the TV

Cable System or VHF/UHF Antenna System

You can enjoy high-definition and standard-definition digital programming (if available in your

area) along with standard-definition analog programming.

This TV is capable of receiving unscrambled digital programming for both cable (QAM and

8VSB) and external VHF/UHF antenna (ATSC).

Cable or VHF/UHF (or VHF only)

Cable System and VHF/UHF Antenna System

Use an optional A-B RF switch (not supplied) to switch between the cable and over-the-air antenna

programming, as indicated below.

75-ohm coaxial cable Rear of TV

CABLE/ANTENNA

• It is strongly recommended that you connect the CABLE/ANTENNA input using a 75-ohm

coaxial cable to receive optimum picture quality. A 300-ohm twin lead cable can easily be affected

by radio frequency interference, resulting in signal degradation.

B

A

Cable

Antenna

A/B RF Switch

Rear of TV

CABLE/ANTENNA

• Be sure to set the Signal Type setting to Cable or Antenna found under the Channel settings

for your input signal (see page 30).

(Continued)

10

HD Cable Box/HD Satellite Box

You can enjoy high-definition programming by subscribing to a high-definition cable service or a

high-definition satellite service. For the best possible picture, make sure you connect this equipment

to your TV via the HDMI or component video (with audio) input located on the back of your TV.

Shown with HDMI Connection

Shown with DVI Connection

P

R

P

B

Y

VIDEO

RGB

(MONO)

VIDEO IN

AUDIO

L

PC IN

DIGITAL

AUDIO

OUT

(OPTICAL)

AUDIO

L

R

AUDIO

R

IN

AUDIO

OUT

(FIX)

COMPONENT IN

(1080p/1080i/

720p/480p/480i)

1

1 2

3

Rear of TV

HDMI cable

HD cable box/

HD satellite box

CATV/Satellite antenna cable

PR

PB

Y

VIDEO

RGB

(MONO)

VIDEO IN

AUDIO

L

PC IN

DIGITAL

AUDIO

OUT

(OPTICAL)

AUDIO

L

R

AUDIO

R

IN

AUDIO

OUT

(FIX)

COMPONENT IN

(1080p/1080i/

720p/480p/480i)

1

1 2

3

Rear of TV

DVI-to-HDMI cable

HD cable box/

HD satellite box

CATV/Satellite

antenna cable

AUDIO-R (red)

AUDIO-L (white)

Audio cable

• If your equipment has a DVI output and not an HDMI output, connect the DVI output to the

HDMI IN 1 (with DVI-to-HDMI cable or adapter) and connect the audio output to the AUDIO

IN (L/R) of HDMI IN 1. For details, see page 7.

Getting Started

11

Shown with Component Connection

PC

Use the TV as a monitor for your PC by connecting an HD15-HD15 cable connection as shown

below. This TV can also be connected to a PC with a DVI or HDMI output. (Refer to the separate

Quick Setup Guide.)

PR

PB

Y

VIDEO

RGB

(MONO)

VIDEO IN

AUDIO

L

PC IN

DIGITAL

AUDIO

OUT

(OPTICAL)

AUDIO

L

R

AUDIO

R

IN

AUDIO

OUT

(FIX)

COMPONENT IN

(1080p/1080i/

720p/480p/480i)

1

1 2

3

Rear of TV

CATV/Satellite antenna cable

AUDIO-R (red)

AUDIO-L (white)

Component video cable

Audio cable

P

R

(red)

P

B

(blue)

Y (green)

HD cable box/

HD satellite box

P

R

P

B

Y

VIDEO

RGB

(MONO)

VIDEO IN

AUDIO

L

PC IN

DIGITAL

AUDIO

OUT

(OPTICAL)

AUDIO

L

R

AUDIO

R

IN

AUDIO

OUT

(FIX)

COMPONENT IN

(1080p/1080i/

720p/480p/480i)

1

1 2

3

Rear of TV

HD15-HD15 cable

(analog RGB)

Audio cable

(stereo mini plugs)

• Connect the PC IN jack to the PC using an HD15-HD15 cable with ferrite core (analog RGB) and

audio cable (see page 7).

• The TV enters the standby mode automatically when the PC is connected to the TV and no signal

has been output from the PC for more than 30 seconds (see page 34).

12

Connecting Other Equipment

SERVICE

ONLY

AUDIO

R

VIDEO

(MONO)

L

IN

VIDEO IN

2

S VIDEO

P

R

P

B

Y

VIDEO

RGB

(MONO)

VIDEO IN

AUDIO

L

PC IN

DIGITAL

AUDIO

OUT

(OPTICAL)

AUDIO

L

R

AUDIO

R

IN

AUDIO

OUT

(FIX)

COMPONENT IN

(1080p/1080i/

720p/480p/480i)

1

1 2

3

CABLE/ANTENNA

Personal

computer

Blu-ray

Disc Player/

“PS3”

DVD

player

Digital

satellite

receiver

Camcorder

Digital

recorder

Analog audio

equipment

(A/V Receiver/

HomeTheater)

CABLE/ANTENNA

Digital

cable box

Audio

system

VCR/Game

system

Digital audio equipment

• Refer to the Quick Setup Guide (supplied) when connecting other equipment to your TV.

Getting Started

13

Bundling the Connecting Cables

Untie the AC power cord from the plastic cable band and connect the AC power cord to the nearest

wall outlet when all the necessary connection is completed. Use the same plastic cable band to

bundle the connecting cables as illustrated below.

Do not bundle the AC power cord with other connecting cables.

When Installing the TV Against a Wall or Enclosed Area

Make sure that your TV has adequate ventilation. Allow enough space around the TV as shown

below. Avoid operating the TV at temperatures below 41 °F (5 °C).

(30 cm)

11

7

/

8

inches

(6 cm)

inches

4 inches

(10 cm)

4 inches

(10 cm)

2

3

/

8

Leave at least this much space around the set.

Installed with stand

inches

11

7

/

8

4 inches

(10 cm)

4 inches

(10 cm)

4 inches (10 cm)

(30 cm)

Installed on the wall

Leave at least

this much space

around the set.

Never install the TV set as follows:

Air circulation is blocked.

Wall

• Inadequate ventilation can lead to overheating of the TV and may cause TV damage or cause

a fire.

14

Securing the TV

Sony strongly recommends taking measures to prevent the TV from toppling over.

Unsecured TVs may topple and result in property damage, serious bodily injury or even

death.

Preventing the TV from Toppling

❑ Secure the TV to a wall and/or stand.

❑ Do not allow children to play or climb on furniture and TV sets.

❑ Avoid placing or hanging items on the TV.

❑ Never install the TV on:

• slippery, unstable and/or uneven surfaces.

• furniture that can easily be used as steps, such as a chest of drawers.

❑ Install the TV where it cannot be pulled, pushed, or knocked over.

❑ Route all AC power cords and connecting cables so that they are not accessible to curious children.

Recommended Measures to Secure the TV

Consider the following measures when securing your TV to a TV stand (not supplied).

1 Secure the stand for the TV.

Make sure the TV stand can adequately support the weight of the TV. Use two angle braces

(not supplied) to secure the stand.

For each angle brace use the appropriate hardware to:

• attach one side of the angle brace to the wall stud.

• attach the other side to the TV stand.

Angle braces

Stand

Getting Started

15

2 Secure the TV to the stand.

Use the optional hardware listed below (not supplied):

• M4 × 14 mm anchor bolt and M4 nut (screwed into the TV’s Table-Top Stand).

• A screw or similar (attach it to the TV stand).

• Rope or chain (strong enough to support the weight of the TV). Make sure that there is no

excess slack in the rope or chain.

An alternative way to secure the TV is with an optional Sony Support Belt Kit.

3 Anchor the TV to the wall.

Use the hardware listed below (not supplied).

• Two anchor bolts, size M4 × 8-10 mm (model KDL-22L5000) or M4 × 10-12 mm (model

KDL-26L5000) or M6 × 10-12 mm (models KDL-32L5000 and KDL-37L5000). Screw the

bolts into the top-most wall-mount holes located on the rear of the TV.

• Rope or chain (attach to one anchor bolt).

• Wall-anchor (attach to the wall stud) strong enough to support the weight of the TV (pass

the rope through the wall-anchor, then attach to the other anchor bolt).

Screw hole

on the Table-

Top Stand

Anchor bolt

Screw

Nut*

* Model KDL-37L5000 does not require the use of a nut.

Wall-mount

holes

Anchor bolts

Wall-anchor

Rope or

chain

• Contact Sony Customer Support to obtain the optional Support Belt Kit by providing your TV

model name.

For United States call: 1-800-488-7669 or visit: www.sony.com/accessories

For Canada call: 1-877-899-7669

• Measure 2 provides minimal protection against the TV toppling over. For further protection,

follow all three measures recommended above.

• If an electric screwdriver is used, set the torque to tighten at approximately 1.5 N·m {15 kgf·cm}.

16

Running Initial Setup

During initial setup, you will perform the following:

• Set the language for the On Screen Display (OSD) text

• Choose your viewing environment

• Signal source connection check

• Scan for digital and analog channels

Complete your cable connections before beginning the Initial Setup. Refer to the Quick Setup

Guide (supplied) for sample connection diagrams.

3 Auto Program will scan for available channels from the signal source directly connected to

the TV’s CABLE/ANTENNA input. Follow the help text provided on the screen to run the

Auto Program.

1 Turn on the TV. The Initial Setup screen will

appear.

2 Use the remote control buttons described below to

navigate through the Initial Setup.

V/v/B/b buttons:

Allow you to navigate and highlight options where applicable.

button:

Allows you to select the highlighted option and advance to the next screen.

Please select your language:

Initial Setup

Español

Français

Select

English

TOOLS

WIDE INPUT

• When prompted to select Retail or Home, be sure to select

Home for ENERGY STAR compliant mode.

• Select Cancel to stop or cancel the Auto Program. The Auto

Program can be done at later time. To run Auto Program at

later time, press MENU and select the Auto Program under

Channel settings.

• Connect either your cable or antenna to the TV (you can connect

both using an A-B RF switch (not supplied); for more details see

page 9.

• Select your preferred aspect ratio for the screen display. Press

WIDE

to select the

Wide Mode

or

press

MENU

and set the

Auto Wide

to

On

under the

Screen

settings; for more details, see page 23.

Select

Initial Setup

Please select the type of use for this TV.

“Retail” optimizes the picture for store display.

“Home” optimizes the picture for normal home use

and is Energy Star compliant.

Retail

Home

Operating the TV

17

Operating the TV

Using the Remote Control

To Insert Batteries into the Remote Control

Insert two size AA batteries (supplied) by

matching e and E on the batteries to the

diagram inside the battery compartment of

the remote control.

Guidelines to follow

Push to

open

• Point your remote control directly at the IR sensor

located on your TV.

• Make sure that no objects are blocking the path

between the remote control and the IR sensor on your

TV.

• Fluorescent lamps can interfere with your remote

control; try turning off the fluorescent lamps.

• If you are having problems with the remote control,

reinsert or replace your batteries and make sure that

they are correctly inserted.

18

Remote Control Button Description

Button Description

1 DISPLAY Press once to display the banner with channel/program

information you are watching. The banner will time

out in a few seconds or press again to exit.

2 CC Press to turn On, turn On when Muting or Off the

Closed Captions (CC).

3 BRAVIA

Sync

These buttons are used to control the equipment

connected to the TV by using the Control for HDMI

function (not available on all Control for HDMI

equipment). Some other buttons on the remote control

may also operate BRAVIA

®

Sync

TM

equipment.

m (fast reverse): Press to play a program in fast

rewind mode.

N PLAY: Press to play a program at a normal speed.

X PAUSE: Press to pause playback.

M (fast forward): Press to play a program in fast

forward mode.

SYNC MENU: Press once to display the Sync’d

HDMI Devices (while a Control for HDMI device is

not selected). Select the HDMI device and then press

SYNC MENU to display the menu of connected

equipment (not available on all Control for HDMI

equipment).

x STOP: Press to stop playback.

THEATER: Press to turn on and off the Theater

Mode. The picture settings will be set for a cinema-

like experience and the audio will be switched to the

audio output of the attached speakers of your BRAVIA

Sync audio system. Your BRAVIA Sync audio system

must be connected by an HDMI connection to your TV

(see page 21 for details).

4

FAVORITES

Press once to display the stored Favorites list. You

can store up to 10 channels and/or external inputs in

your Favorites list.

5 WIDE Press repeatedly to cycle through the available Wide

Mode settings. See page 23.

6 RETURN Press to go back to the previous screen or exit from the

screen when displaying menu items and settings.

7 MENU Press to display the menu with TV functions and

settings. See “Using the Menus” on page 25.

TOOLS

WIDE INPUT

CCDISPLAY POWER

1

2

3

4

5

6

7

•The 5, PLAY and CH + buttons have a tactile dot. Use them as a reference when operating the TV.

Operating the TV

19

8 0-9 ENT Press 0-9 to select a channel; the channel changes after

two seconds. Press ENT to change channels

immediately.

9 Use with 0-9 and ENT to select digital channels.

For example, to enter 2.1, press , , and ENT.

0 VOL +/– Press to adjust the volume.

qa MUTING Press to mute the sound. Press again or press VOL + to

restore the sound.

qs POWER Press to turn on and off the TV.

qd INPUT Press to display the list of External Inputs and TV

mode. Press repeatedly to toggle through the inputs.

See page 24.

qf V/v/B/b Press V/v/B/b to move focus/highlight. Press to

select/confirm an item.

qg

TOOLS

Press to display a list of convenient functions and

menu shortcuts. The TOOLS menu items vary based

on current input and content.

qh CH +/– Press to scan through channels. To scan quickly

through channels, press and hold down either CH +/–.

qj JUMP Press to jump back and forth between two channels.

The TV alternates between the current channel and the

last channel that was selected.

Button Description

2

1

TOOLS

WIDE INPUT

CCDISPLAY POWER

8

9

0

qa

qs

qd

qf

qg

qh

qj

JUMP JUMP

20

TV Controls and Indicators

PIC OFF / TIMER

STANDBY

POWER

INPUT

POWER

CHANNEL

VOLUME

MENU

5

6

7

8

9

1 2 3 4

0

Item Description

1 (IR) Infrared

Receiver

Receives IR signal from the remote control.

2 PIC OFF/

TIMER LED

Lights up in orange when the sleep timer is set.

Lights up in green when the Power Saving is set to Picture Off.

3 STANDBY

LED

Lights up in red when your TV is in PC power saving mode.

4 POWER LED Lights up in green when the TV is turned on.

5 POWER Press to turn on and off the TV.

6 – CHANNEL + Press to scan through channels. To scan quickly through channels, press and hold down

either CH –/+. In the menu screen, these buttons serve as up/down buttons.

7 – VOLUME +

Press to adjust the volume. In the

menu

screen, these buttons serve as left/right buttons.

8

INPUT

Press to display the list of external inputs. Press repeatedly to toggle through the inputs.

In the menu screen, this button serves as confirming the selection or setting.

9 MENU

Press to display

menu

with TV functions and settings (see “Using the Menus” on page 25).

0 Speaker Outputs audio signal.

• Inputs can be changed by pressing V/v and while the list of external inputs menu is

displayed.

• For more information about setting up the external inputs labels and the Skip feature, see page 35.

• The CHANNEL + button has a tactile dot. Use it as a reference when operating the TV.

• Make sure that the TV is completely switched off before unplugging the power cord.

Page is loading ...

Sony KDL-22L5000 User manual

This manual is also suitable for

Sony KDL-22L5000 User manual

Related papers

Other documents