LCD Digital
Color TV
© 2009 Sony Corporation
Operating Instructions
Sony Customer Support
U.S.A.: www.sony.com/tvsupport
Canada: www.sony.ca/support
United States
1.800.222.SONY
Canada
1.877.899.SONY
Please Do Not Return
the Product to the Store
KDL-37L5000
KDL-32L5000
KDL-26L5000
KDL-22L5000
2
CAUTION
To prevent electric shock and blade exposure, do not use
this polarized AC plug with an extension cord, receptacle or
other outlet unless the blades can be fully inserted.
❑ Operate the TV only on 120-240 V AC.
Licensing Information
Macintosh is a trademark of Apple Inc., registered in the U.S. and
other countries.
HDMI, the HDMI logo and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing, LLC.
Fergason Patent Properties, LLC:
U.S. Patent No. 5,717,422
U.S. Patent No. 6,816,141
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
Blu-ray Disc is a trademark.
“BRAVIA”, , BRAVIA Sync, and are trademarks or
registered marks of Sony Corporation.
“PlayStation” is a registered trademark and “PS3” is a trademark of
Sony Computer Entertainment Inc.
Your BRAVIA TV is ENERGY STAR
®
qualified
in the “Home” mode.
It meets strict energy efficiency guidelines set by
the U.S. Environmental Protection Agency and
Department of Energy. ENERGY STAR is a joint
program of these government agencies, designed
to promote energy efficient products and
practices.
❑ When the TV is initially set up, it is designed to meet
ENERGY STAR requirements.
❑ Changes to certain features, settings, and functionalities of
this TV (i.e. Picture/Sound, Power Savings) can slightly
change the power consumption.
Depending upon such changed settings, the power consumption
may increase which possibly could exceed the limits required for the
ENERGY STAR qualification.
Compatible Wall Mount Bracket Information
Use the following Sony WALL-MOUNT BRACKET with
your TV model.
Use with other WALL-MOUNT BRACKETS may cause
instability and could result in property damages or injury.
Cleaning
When cleaning, be sure to unplug the power cord to avoid
any chance of electric shock.
• Wipe the LCD screen gently with a soft cloth.
• Stubborn stains may be removed with a cloth slightly
moistened with a solution of mild soap and warm water.
• If using a chemically pretreated cloth, please follow the
instruction provided on the package.
• Never use strong solvents such as a thinner, alcohol or
benzine for cleaning.
• See the supplied Safety Booklet for additional
information.
Owner’s Record
The model and serial numbers are located at the rear of the TV.
Record these numbers in the spaces provided below. Refer to
them whenever you call upon your Sony dealer regarding this
TV.
Model Name
Serial No.
Sony TV Model No.
KDL-22L5000
KDL-26L5000
KDL-32L5000
KDL-37L5000
Sony
Wall-Mount
Bracket Model
No.
SU-WL100 SU-WL500
This manual is for the 22 class, 26, 32 class, and 37 inch BRAVIA KDL-L5000 series models with screen size measured diagonally. The
22 class has a 21.6 inch viewable image size and the 32 class has a 31.5 inch viewable image size (measured diagonally).
3
Contents
Introducing Your New BRAVIA
®
Welcome to the World of BRAVIA
®
. . . . . . . . .4
Experiencing Stunning HD with Your
BRAVIA . . . . . . . . . . . . . . . . . . . . . . . . . . .4
The Four Steps to a Stunning HD
Experience . . . . . . . . . . . . . . . . . . . . . . . . .5
TV Feature Highlights . . . . . . . . . . . . . . . . . . .5
Getting Started
Setting Up Your TV . . . . . . . . . . . . . . . . . . . . .6
Locating Inputs and Outputs . . . . . . . . . . . . . .7
Adjusting the viewing angle of the TV. . . . . . .8
Connecting the TV . . . . . . . . . . . . . . . . . . . . .9
Connecting Other Equipment . . . . . . . . . . . .12
Bundling the Connecting Cables. . . . . . . . . .13
When Installing the TV Against a Wall or
Enclosed Area . . . . . . . . . . . . . . . . . . . . .13
Securing the TV . . . . . . . . . . . . . . . . . . . . . .14
Running Initial Setup. . . . . . . . . . . . . . . . . . .16
Operating the TV
Using the Remote Control. . . . . . . . . . . . . . .17
Remote Control Button Description . . . . . . .18
TV Controls and Indicators . . . . . . . . . . . . . .20
Using Features
Using BRAVIA Sync with Control for
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Using PIP Feature. . . . . . . . . . . . . . . . . . . . .22
Favorites . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Wide Mode . . . . . . . . . . . . . . . . . . . . . . . . . .23
Wide Mode with PC . . . . . . . . . . . . . . . . . . .23
Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Using the Menus
Navigating through TV Menus . . . . . . . . . . .25
Using the Picture Settings. . . . . . . . . . . . . . .26
Using the Sound Settings . . . . . . . . . . . . . . .27
Using the Screen Settings . . . . . . . . . . . . . .28
Using the Channel Settings . . . . . . . . . . . . .30
Using the Parental Lock Settings . . . . . . . . .31
Using the Setup Settings . . . . . . . . . . . . . . .34
Other Information
PC Input Signal Reference Chart for
PC and HDMI IN 1/2/3 . . . . . . . . . . . . . . .37
Preparing the TV for Wall-Mounting . . . . . . .38
Troubleshooting . . . . . . . . . . . . . . . . . . . . . .39
Important Notices . . . . . . . . . . . . . . . . . . . . .43
Specifications . . . . . . . . . . . . . . . . . . . . . . . .44
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Customer Support
United States
http://www.sony.com/tvsupport
Canada
http://www.sony.ca/support
On-line Registration
United States
http://productregistration.sony.com
Canada
http://www.SonyStyle.ca/registration
4
Introducing Your New BRAVIA
®
Welcome to the World of BRAVIA
®
Thank you for choosing this Sony
BRAVIA
®
high-definition television. Use the
documentations listed below to get the most out of your TV.
Experiencing Stunning HD with Your BRAVIA
The quality of the image you see on your BRAVIA
TV is only as good as the quality of the
signal it receives. To experience the stunning detail of your new
BRAVIA
TV, you need
access to HD programming. Your
BRAVIA
TV can receive and display HD programming
from:
• Over-the-air broadcasting via HD-quality antenna
• HD cable subscription
• HD satellite subscription
• Blu-ray Disc™ player or other HD compatible external equipment
Contact your cable or satellite provider for information on upgrading to HD programming.
Safety Booklet
Contains precautionary
measures to keep you and
your TV safe. Read this
information prior to setting up
your TV.
Quick Setup Guide
Provides TV setup information with sample
connection diagrams and TV features.
Operating Instructions
Provides the most detailed
information to operate your
TV.
Introducing Your New BRAVIA
®
5
The Four Steps to a Stunning HD Experience
Set, Sound, Source, and Setup
Along with your BRAVIA TV set, a complete HD system requires an HD sound system, a
source of HD programming, and a proper connection setup. Refer to the Quick Setup
Guide, enclosed separately, for connecting optional equipment.
TV Feature Highlights
Yo u r BRAVIA comes with many convenient features, such as:
➢ BRAVIA
®
Sync
TM
: Allows your BRAVIA TV to communicate with other Sony
equipment supporting the Control for HDMI function (page 21).
➢ PIP (Picture in Picture): You can work on your PC and watch your favorite TV
program simultaneously (page 22).
➢ Favorites: Your favorite channels and inputs are at your finger tips for easy
access (page 22).
➢ Auto Wide Mode: Set your TV to automatically adjust the screen based on the
signal resolution (page 23).
➢ Input Selection: Allows you to easily switch between the connected equipment
(page 24).
You can enjoy crisp, clear images, smooth
movement, and high-impact visuals from
1080 HD signals as shown here.
When you compare a high-definition signal
to a standard analog signal, you will notice
a big difference in picture quality. If black
bars appear as shown here, press WIDE
on the remote control to fill the screen.
6
Getting Started
Setting Up Your TV
The TV is packaged with a detached Table-Top Stand so you can mount the TV to a wall right
away. If you are not mounting the TV to a wall, you will need to attach the Table-Top Stand. Use a
Philips screwdriver and the supplied screws to complete the task. Look for the attachment
instruction taped to the TV unit.
Be sure to consider the following while setting up your TV:
• Disconnect all cables when carrying the TV.
• Carry the TV with the adequate number of people; larger size TVs require two or more people.
• Placement of the hands carrying the TV is very important for safety and to avoid damage.
• Adequate ventilation is necessary (see page 13).
• For best picture quality, do not expose the screen to direct illumination or sunlight.
• Avoid installing the TV in a room with reflective wall and floor materials.
• Avoid moving the TV from a cold area to a warm area. Sudden room temperature changes may
cause moisture condensation. This may cause the TV to show poor picture and/or poor color.
Should this occur, allow moisture to evaporate completely before powering on the TV.
KDL-26L5000/KDL-32L5000/KDL-37L5000
KDL-22L5000
• For additional safety information, read the supplied Safety and Regulatory Booklet.
• When cable connection is completed, be sure to secure the TV to a stable surface or mount it to a
wall. The designated Sony wall-mount bracket model is available on page 2 of this manual. For
details on securing the TV and items listed above, see page 14.
Getting Started
7
Locating Inputs and Outputs
Item Description
1 SERVICE This port is for service only.
2 HDMI IN 1/2/3
L-AUDIO-R
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-
digital audio/video interface between this TV and any HDMI-equipped audio/video
equipment, such as a set-top box, DVD player, and A/V receiver. HDMI supports
enhanced, or high-definition video, plus digital audio. Be sure to use only an HDMI
cable that bears the HDMI logo.
Use the HDMI IN 1 port when connecting DVI equipment. Use a DVI-to-HDMI
cable or adapter (not supplied). Equipment using a DVI connection also requires an
additional audio connection using an audio cable connected to AUDIO (L/R).
3 VIDEO IN 2
S VIDEO
VIDEO/L
(MONO)-
AUDIO-R
Connects to the S VIDEO output jack of video equipment. If both composite video
and S VIDEO are connected, S VIDEO signal has priority.
If you have mono equipment, connect its audio output port to the TV’s L (MONO)
audio input port. Use VIDEO IN 2 with AUDIO L (mono) and R.
4 PC IN
(RGB/AUDIO)
Connects to a personal computer’s video and audio output connector. Can also be
connected to other analog RGB equipment. See “PC Input Signal Reference Chart”
on page 37 for the signals that can be displayed.
For some Apple Macintosh computers, it may be necessary to use an adapter (not
supplied). If an adapter is used, connect the adapter to the computer before
connecting the HD15-HD15 cable.
You may need to adjust the TV settings or your PC’s resolution and timing. See
page 11 for information on how to setup your PC to this TV.
5 DIGITAL AUDIO
OUT (OPTICAL)
Connects to the optical audio input of a digital audio equipment that is
PCM/Dolby* Digital compatible.
* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
SERVICE
ONLY
AUDIO
R
VIDEO
(MONO)
L
IN
VIDEO IN
2
2
S VIDEO
2
1
3
P
R
P
B
Y
VIDEO
RGB
(MONO)
VIDEO IN
AUDIO
L
PC IN
DIGITAL
AUDIO
OUT
(OPTICAL)
AUDIO
L
R
AUDIO
R
IN
AUDIO
OUT
(FIX)
COMPONENT IN
(1080p/1080i/
720p/480p/480i)
1
1 2
3
CABLE/ANTENNA
4
5
67
8
2
9
0
Side Panel Rear Panel
(Continued)
8
Adjusting the viewing angle of the TV
KDL-22L5000 only
This TV can be adjusted within the angle shown below.
Adjust the angle back and forth (tilt)
6
VIDEO IN 1/
COMPONENT
IN 1
(1080p/1080i/
720p/480p/480i)/
L (MONO)-
AUDIO-R
This input port can be used as a composite video input (VIDEO 1) or as a
component video input (COMPONENT 1). For composite use, connect the yellow
jack to Y/Video for video and use audio L (mono) and R for audio signal. For
component connection, use Y, P
B
, P
R
for video signals and also connect the audio L
(mono) and R for audio signal.
This TV can auto detect and switch between the VIDEO 1 and COMPONENT 1
when VIDEO 1 or COMPONENT 1 is connected.
To set to auto detection, press MENU and go to the Setup settings. Select the
Video/Component 1 Selection option then set to Auto.
7
COMPONENT
IN 2
(1080p/1080i/
720p/480p/480i)/
L-AUDIO-R
Component video provides better picture quality than the S Video and composite
video.
Audio connection is required for the COMPONENT IN ports, connect audio (L/R).
8 AUDIO OUT
(FIX) L/R
Connects to the left and right audio input jacks of your analog audio equipment.
You can use these outputs to listen to your TV’s audio through your stereo system.
9 AC power cord Plug the cord into the nearest wall outlet.
0 CABLE/
ANTENNA
RF input that connects to your Cable or VHF/UHF antenna.
Item Description
3˚ 8˚
Right view
Front
• An HDMI or Component video (YP
B
P
R
) connection is required to view 480i, 480p, 720p, 1080i
and 1080p video formats. 1080/24p is available only with HDMI connection. This TV displays all
picture format types in a resolution of 1,366 dots × 768 lines.
Getting Started
9
Connecting the TV
Cable System or VHF/UHF Antenna System
You can enjoy high-definition and standard-definition digital programming (if available in your
area) along with standard-definition analog programming.
This TV is capable of receiving unscrambled digital programming for both cable (QAM and
8VSB) and external VHF/UHF antenna (ATSC).
Cable or VHF/UHF (or VHF only)
Cable System and VHF/UHF Antenna System
Use an optional A-B RF switch (not supplied) to switch between the cable and over-the-air antenna
programming, as indicated below.
75-ohm coaxial cable Rear of TV
CABLE/ANTENNA
• It is strongly recommended that you connect the CABLE/ANTENNA input using a 75-ohm
coaxial cable to receive optimum picture quality. A 300-ohm twin lead cable can easily be affected
by radio frequency interference, resulting in signal degradation.
B
A
Cable
Antenna
A/B RF Switch
Rear of TV
CABLE/ANTENNA
• Be sure to set the Signal Type setting to Cable or Antenna found under the Channel settings
for your input signal (see page 30).
(Continued)
10
HD Cable Box/HD Satellite Box
You can enjoy high-definition programming by subscribing to a high-definition cable service or a
high-definition satellite service. For the best possible picture, make sure you connect this equipment
to your TV via the HDMI or component video (with audio) input located on the back of your TV.
Shown with HDMI Connection
Shown with DVI Connection
P
R
P
B
Y
VIDEO
RGB
(MONO)
VIDEO IN
AUDIO
L
PC IN
DIGITAL
AUDIO
OUT
(OPTICAL)
AUDIO
L
R
AUDIO
R
IN
AUDIO
OUT
(FIX)
COMPONENT IN
(1080p/1080i/
720p/480p/480i)
1
1 2
3
Rear of TV
HDMI cable
HD cable box/
HD satellite box
CATV/Satellite antenna cable
PR
PB
Y
VIDEO
RGB
(MONO)
VIDEO IN
AUDIO
L
PC IN
DIGITAL
AUDIO
OUT
(OPTICAL)
AUDIO
L
R
AUDIO
R
IN
AUDIO
OUT
(FIX)
COMPONENT IN
(1080p/1080i/
720p/480p/480i)
1
1 2
3
Rear of TV
DVI-to-HDMI cable
HD cable box/
HD satellite box
CATV/Satellite
antenna cable
AUDIO-R (red)
AUDIO-L (white)
Audio cable
• If your equipment has a DVI output and not an HDMI output, connect the DVI output to the
HDMI IN 1 (with DVI-to-HDMI cable or adapter) and connect the audio output to the AUDIO
IN (L/R) of HDMI IN 1. For details, see page 7.
Getting Started
11
Shown with Component Connection
PC
Use the TV as a monitor for your PC by connecting an HD15-HD15 cable connection as shown
below. This TV can also be connected to a PC with a DVI or HDMI output. (Refer to the separate
Quick Setup Guide.)
PR
PB
Y
VIDEO
RGB
(MONO)
VIDEO IN
AUDIO
L
PC IN
DIGITAL
AUDIO
OUT
(OPTICAL)
AUDIO
L
R
AUDIO
R
IN
AUDIO
OUT
(FIX)
COMPONENT IN
(1080p/1080i/
720p/480p/480i)
1
1 2
3
Rear of TV
CATV/Satellite antenna cable
AUDIO-R (red)
AUDIO-L (white)
Component video cable
Audio cable
P
R
(red)
P
B
(blue)
Y (green)
HD cable box/
HD satellite box
P
R
P
B
Y
VIDEO
RGB
(MONO)
VIDEO IN
AUDIO
L
PC IN
DIGITAL
AUDIO
OUT
(OPTICAL)
AUDIO
L
R
AUDIO
R
IN
AUDIO
OUT
(FIX)
COMPONENT IN
(1080p/1080i/
720p/480p/480i)
1
1 2
3
Rear of TV
HD15-HD15 cable
(analog RGB)
Audio cable
(stereo mini plugs)
• Connect the PC IN jack to the PC using an HD15-HD15 cable with ferrite core (analog RGB) and
audio cable (see page 7).
• The TV enters the standby mode automatically when the PC is connected to the TV and no signal
has been output from the PC for more than 30 seconds (see page 34).
12
Connecting Other Equipment
SERVICE
ONLY
AUDIO
R
VIDEO
(MONO)
L
IN
VIDEO IN
2
2
S VIDEO
P
R
P
B
Y
VIDEO
RGB
(MONO)
VIDEO IN
AUDIO
L
PC IN
DIGITAL
AUDIO
OUT
(OPTICAL)
AUDIO
L
R
AUDIO
R
IN
AUDIO
OUT
(FIX)
COMPONENT IN
(1080p/1080i/
720p/480p/480i)
1
1 2
3
CABLE/ANTENNA
Personal
computer
Blu-ray
Disc Player/
“PS3”
DVD
player
Digital
satellite
receiver
Camcorder
Digital
recorder
Analog audio
equipment
(A/V Receiver/
HomeTheater)
CABLE/ANTENNA
Digital
cable box
Audio
system
VCR/Game
system
Digital audio equipment
• Refer to the Quick Setup Guide (supplied) when connecting other equipment to your TV.
Getting Started
13
Bundling the Connecting Cables
Untie the AC power cord from the plastic cable band and connect the AC power cord to the nearest
wall outlet when all the necessary connection is completed. Use the same plastic cable band to
bundle the connecting cables as illustrated below.
Do not bundle the AC power cord with other connecting cables.
When Installing the TV Against a Wall or Enclosed Area
Make sure that your TV has adequate ventilation. Allow enough space around the TV as shown
below. Avoid operating the TV at temperatures below 41 °F (5 °C).
(30 cm)
11
7
/
8
inches
(6 cm)
inches
4 inches
(10 cm)
4 inches
(10 cm)
2
3
/
8
Leave at least this much space around the set.
Installed with stand
inches
11
7
/
8
4 inches
(10 cm)
4 inches
(10 cm)
4 inches (10 cm)
(30 cm)
Installed on the wall
Leave at least
this much space
around the set.
Never install the TV set as follows:
Air circulation is blocked.
Air circulation is blocked.
Wall
Wall
• Inadequate ventilation can lead to overheating of the TV and may cause TV damage or cause
a fire.
14
Securing the TV
Sony strongly recommends taking measures to prevent the TV from toppling over.
Unsecured TVs may topple and result in property damage, serious bodily injury or even
death.
Preventing the TV from Toppling
❑ Secure the TV to a wall and/or stand.
❑ Do not allow children to play or climb on furniture and TV sets.
❑ Avoid placing or hanging items on the TV.
❑ Never install the TV on:
• slippery, unstable and/or uneven surfaces.
• furniture that can easily be used as steps, such as a chest of drawers.
❑ Install the TV where it cannot be pulled, pushed, or knocked over.
❑ Route all AC power cords and connecting cables so that they are not accessible to curious children.
Recommended Measures to Secure the TV
Consider the following measures when securing your TV to a TV stand (not supplied).
1 Secure the stand for the TV.
Make sure the TV stand can adequately support the weight of the TV. Use two angle braces
(not supplied) to secure the stand.
For each angle brace use the appropriate hardware to:
• attach one side of the angle brace to the wall stud.
• attach the other side to the TV stand.
Angle braces
Stand
Getting Started
15
2 Secure the TV to the stand.
Use the optional hardware listed below (not supplied):
• M4 × 14 mm anchor bolt and M4 nut (screwed into the TV’s Table-Top Stand).
• A screw or similar (attach it to the TV stand).
• Rope or chain (strong enough to support the weight of the TV). Make sure that there is no
excess slack in the rope or chain.
An alternative way to secure the TV is with an optional Sony Support Belt Kit.
3 Anchor the TV to the wall.
Use the hardware listed below (not supplied).
• Two anchor bolts, size M4 × 8-10 mm (model KDL-22L5000) or M4 × 10-12 mm (model
KDL-26L5000) or M6 × 10-12 mm (models KDL-32L5000 and KDL-37L5000). Screw the
bolts into the top-most wall-mount holes located on the rear of the TV.
• Rope or chain (attach to one anchor bolt).
• Wall-anchor (attach to the wall stud) strong enough to support the weight of the TV (pass
the rope through the wall-anchor, then attach to the other anchor bolt).
Screw hole
on the Table-
Top Stand
Anchor bolt
Screw
Nut*
* Model KDL-37L5000 does not require the use of a nut.
Wall-mount
holes
Anchor bolts
Wall-anchor
Rope or
chain
• Contact Sony Customer Support to obtain the optional Support Belt Kit by providing your TV
model name.
For United States call: 1-800-488-7669 or visit: www.sony.com/accessories
For Canada call: 1-877-899-7669
• Measure 2 provides minimal protection against the TV toppling over. For further protection,
follow all three measures recommended above.
• If an electric screwdriver is used, set the torque to tighten at approximately 1.5 N·m {15 kgf·cm}.
16
Running Initial Setup
During initial setup, you will perform the following:
• Set the language for the On Screen Display (OSD) text
• Choose your viewing environment
• Signal source connection check
• Scan for digital and analog channels
Complete your cable connections before beginning the Initial Setup. Refer to the Quick Setup
Guide (supplied) for sample connection diagrams.
3 Auto Program will scan for available channels from the signal source directly connected to
the TV’s CABLE/ANTENNA input. Follow the help text provided on the screen to run the
Auto Program.
1 Turn on the TV. The Initial Setup screen will
appear.
2 Use the remote control buttons described below to
navigate through the Initial Setup.
V/v/B/b buttons:
Allow you to navigate and highlight options where applicable.
button:
Allows you to select the highlighted option and advance to the next screen.
Please select your language:
Initial Setup
Español
Français
Select
English
TOOLS
WIDE INPUT
• When prompted to select Retail or Home, be sure to select
Home for ENERGY STAR compliant mode.
• Select Cancel to stop or cancel the Auto Program. The Auto
Program can be done at later time. To run Auto Program at
later time, press MENU and select the Auto Program under
Channel settings.
• Connect either your cable or antenna to the TV (you can connect
both using an A-B RF switch (not supplied); for more details see
page 9.
• Select your preferred aspect ratio for the screen display. Press
WIDE
to select the
Wide Mode
or
press
MENU
and set the
Auto Wide
to
On
under the
Screen
settings; for more details, see page 23.
Select
Initial Setup
Please select the type of use for this TV.
“Retail” optimizes the picture for store display.
“Home” optimizes the picture for normal home use
and is Energy Star compliant.
Retail
Home
Operating the TV
17
Operating the TV
Using the Remote Control
To Insert Batteries into the Remote Control
Insert two size AA batteries (supplied) by
matching e and E on the batteries to the
diagram inside the battery compartment of
the remote control.
Guidelines to follow
Push to
open
• Point your remote control directly at the IR sensor
located on your TV.
• Make sure that no objects are blocking the path
between the remote control and the IR sensor on your
TV.
• Fluorescent lamps can interfere with your remote
control; try turning off the fluorescent lamps.
• If you are having problems with the remote control,
reinsert or replace your batteries and make sure that
they are correctly inserted.
18
Remote Control Button Description
Button Description
1 DISPLAY Press once to display the banner with channel/program
information you are watching. The banner will time
out in a few seconds or press again to exit.
2 CC Press to turn On, turn On when Muting or Off the
Closed Captions (CC).
3 BRAVIA
Sync
These buttons are used to control the equipment
connected to the TV by using the Control for HDMI
function (not available on all Control for HDMI
equipment). Some other buttons on the remote control
may also operate BRAVIA
®
Sync
TM
equipment.
m (fast reverse): Press to play a program in fast
rewind mode.
N PLAY: Press to play a program at a normal speed.
X PAUSE: Press to pause playback.
M (fast forward): Press to play a program in fast
forward mode.
SYNC MENU: Press once to display the Sync’d
HDMI Devices (while a Control for HDMI device is
not selected). Select the HDMI device and then press
SYNC MENU to display the menu of connected
equipment (not available on all Control for HDMI
equipment).
x STOP: Press to stop playback.
THEATER: Press to turn on and off the Theater
Mode. The picture settings will be set for a cinema-
like experience and the audio will be switched to the
audio output of the attached speakers of your BRAVIA
Sync audio system. Your BRAVIA Sync audio system
must be connected by an HDMI connection to your TV
(see page 21 for details).
4
FAVORITES
Press once to display the stored Favorites list. You
can store up to 10 channels and/or external inputs in
your Favorites list.
5 WIDE Press repeatedly to cycle through the available Wide
Mode settings. See page 23.
6 RETURN Press to go back to the previous screen or exit from the
screen when displaying menu items and settings.
7 MENU Press to display the menu with TV functions and
settings. See “Using the Menus” on page 25.
TOOLS
WIDE INPUT
CCDISPLAY POWER
1
2
3
4
5
6
7
•The 5, PLAY and CH + buttons have a tactile dot. Use them as a reference when operating the TV.
Operating the TV
19
8 0-9 ENT Press 0-9 to select a channel; the channel changes after
two seconds. Press ENT to change channels
immediately.
9 Use with 0-9 and ENT to select digital channels.
For example, to enter 2.1, press , , and ENT.
0 VOL +/– Press to adjust the volume.
qa MUTING Press to mute the sound. Press again or press VOL + to
restore the sound.
qs POWER Press to turn on and off the TV.
qd INPUT Press to display the list of External Inputs and TV
mode. Press repeatedly to toggle through the inputs.
See page 24.
qf V/v/B/b Press V/v/B/b to move focus/highlight. Press to
select/confirm an item.
qg
TOOLS
Press to display a list of convenient functions and
menu shortcuts. The TOOLS menu items vary based
on current input and content.
qh CH +/– Press to scan through channels. To scan quickly
through channels, press and hold down either CH +/–.
qj JUMP Press to jump back and forth between two channels.
The TV alternates between the current channel and the
last channel that was selected.
Button Description
2
1
TOOLS
WIDE INPUT
CCDISPLAY POWER
8
9
0
qa
qs
qd
qf
qg
qh
qj
JUMP JUMP
20
TV Controls and Indicators
PIC OFF / TIMER
STANDBY
POWER
INPUT
POWER
CHANNEL
VOLUME
MENU
5
6
7
8
9
1 2 3 4
0
Item Description
1 (IR) Infrared
Receiver
Receives IR signal from the remote control.
2 PIC OFF/
TIMER LED
Lights up in orange when the sleep timer is set.
Lights up in green when the Power Saving is set to Picture Off.
3 STANDBY
LED
Lights up in red when your TV is in PC power saving mode.
4 POWER LED Lights up in green when the TV is turned on.
5 POWER Press to turn on and off the TV.
6 – CHANNEL + Press to scan through channels. To scan quickly through channels, press and hold down
either CH –/+. In the menu screen, these buttons serve as up/down buttons.
7 – VOLUME +
Press to adjust the volume. In the
menu
screen, these buttons serve as left/right buttons.
8
INPUT
Press to display the list of external inputs. Press repeatedly to toggle through the inputs.
In the menu screen, this button serves as confirming the selection or setting.
9 MENU
Press to display
menu
with TV functions and settings (see “Using the Menus” on page 25).
0 Speaker Outputs audio signal.
• Inputs can be changed by pressing V/v and while the list of external inputs menu is
displayed.
• For more information about setting up the external inputs labels and the Skip feature, see page 35.
• The CHANNEL + button has a tactile dot. Use it as a reference when operating the TV.
• Make sure that the TV is completely switched off before unplugging the power cord.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Sony 46EX400 User manual
-
-
Sony KDL-52W5100 User manual
-
Sony KDL-32BX300 Operating instructions
-
Dolby Laboratories KDL-32XBR6 User manual
-
-
-
-
-
Sony KDL-52XBR9 Operating instructions