Astonica 50105037 Assembly Instructions

Type
Assembly Instructions

This manual is also suitable for

OUTDOOR LIVING
Made in China
Distributed By:
©2003 World Factory, Inc.
®
Southlake, TX 76092
Limited Warranty
World Factory, Inc.® Products for Home Use
World Factory, Inc.® (Seller) warrants to the original Buyer only, that each Astonica™ Product will be free
from defects in material and workmanship for a period of one (1) year from date of purchase. SELLER’S
SOLE OBLIGATION AND BUYER’S EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL
BE THE REPAIR OR REPLACEMENT OF PARTS, WITHOUT CHARGE, WHICH ARE DEFECTIVE IN
MATERIAL OR WORKMANSHIP. ANY PARTS AS DETERMINED BY THE SELLER WHICH HAVE BEEN
MISUSED; ABUSED OR DAMAGED EITHER DIRECTLY OR INDIRECTLY FROM REPAIRS OR
ALTERATIONS ATTEMPTED BY UNAUTHORIZED PERSONS; IMPROPER MAINTENANCE, NEGLECT
OR ACCIDENT ARE NOT COVERED BY THIS LIMITED WARRANTY. This warranty does not apply to
damage, heat-induced coloration changes, scratching or alteration due to normal use or weathering. To
make a claim under this Limited Warranty, you must return the complete product, transportation prepaid, to
any World Factory, Inc.® authorized service center. Call 1-888-424-3354 for the location of the nearest
authorized service center.
Additional Limitations
THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY OR CONSUMABLE ITEMS RELATED
TO THIS PRODUCT. ALL IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE (1) YEAR
FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS,
ARISING FROM THE SALE OR USE OF THIS PRODUCT.
If any provision of this Limited Warranty is for any reason held to be invalid or unenforceable, such provision
shall not affect any other provision herein, this Limited Warranty shall be construed as if such invalid and/or
unenforceable provision had never been contained herein.
This Warranty contains the entire agreement between Seller and Buyer and supersedes any and all prior
agreements, arrangements, or understandings between the parties relating to product warranty.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
TOSCA 2-SEAT GLIDER
Assembly Instructions
MODEL NOS:50105037, 50105038, 50105045
precautions
Read the instructions and before use of this product
Please keep this instruction manual for future reference
ASSEMBLY INSTRUCTIONS
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT, DO NOT RETURN IT TO YOUR
RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
Carefully remove the contents from the package. If any parts are missing do not attempt to use the product
until they have been obtained and correctly installed.
Caution: Do not over tighten fasteners.
A
B
C
D
F
E
H
G
I
PARTS & HARDWARE LIST
PART # DESCRIPTION QUANTITY
A 1Chair Back
B 1Chair Seat
C 1Chair Base
D 2Side Frame
E 4Glider Arm
F 8M6 x 40L Screw
M6 x 45L Screw
Lock Washer
G
I
8
8
Nut
J 8
Screw Cover
K 16
Nut Cover
L 8
Hex Wrench
M 1
Flat Washer
H 16
Allen Wrench
N 1
J
K
L
M
N
FIGURE 1
B
D
G
H
FIGURE 3
G
H
E
I
J
FIGURE 2
A
D
D
F
H
FIGURE 4
D
D
C
G
H
I
J
1. (See Figure 1) Attach one of the side
frames (D) to chair seat (B) with screws (G)
and flat washers (H). Repeat for the other
side frame (D). Do not tighten fasteners.
2. (See Figure 2) Attach chair back (A) to side
frames (D) with screws (F) and flat
washers (H). Do not tighten fasteners.
3. (See Figure 3) Attach four glider arms (E) to
the outside edge of chair base (C) with
screws (G), flat washer (H), lock washer (I)
and hex nut (J).
4. (See Figure 4) Position Chair assemble over
chair base (C) and attach four glider arms (E)
to bottom rails of side frames (D) with
screws (G), flat washer (H), lock washers (I)
and hex nut (J).
5. Tighten all fasteners securely. Insert screw
covers (K) into all exposed screw heads. Slip
nut covers (L) over all exposed hex nuts.
C
G
H
  • Page 1 1
  • Page 2 2

Astonica 50105037 Assembly Instructions

Type
Assembly Instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI