Whirlpool PRIMO 1407 UM Program Chart

Brand: Whirlpool

Model: PRIMO 1407 UM

Type: Program Chart

E. Programme selector

F. “Start/Pause” button

G. “Cycle end” button

H. “Spin” button

I. Eco monitor

J. “Reset” button

A. “Door open” indication

This washing machine is equipped with

automatic safety functions which detect

and diagnose faults at an early stage and

react appropriately, e.g.:

B. “Service” indication

C. “Water tap closed” indication

D. “Clean pump” indication

EN PROGRAMME CHART

Whirlpool is a registered trademark of Whirlpool USA W10799212

i = option / Yes = dosing required

For improved garment care spin speed is restricted in these programmes.

Programme

Tempe-

rature

Care

Labels

Max.

Load

Type of wash / Notes

- respect the manufacturer's recommendations on the care label

Detergents and Additives Special options

Cycle

end

Einde

cyclus

Max

Spin

Speed

rpm

Pre-

wash

Main

Wash

Softener Colours

15°

Kleuren

15°

Rapid

Snel

Clean+

Pre-

wash

Voor-

was

Intensiv

rinse

Intensief

spoelen

Easy

ironing

Gemak-

kelijk

strijken

Rinse

hold

Spoel-

stop

Spin

Centri-

fugeren

Mixed Gemengde was

40°C

4.0

Lightly to normally soiled robust laundry made of cotton, linen, artiﬁcial

ﬁbres and their blends. Effective one-hour programme.

Make sure to wash only similar colours together in one wash load.

–

Ye s

i i

– – –

i i i i i

Max.

Fabrics

Cotton Katoen

40-60-95°C

7.0

Normally to heavily soiled towels, underwear, table and bed linen etc. made

of cotton and linen.

Ye s

i i i i i i i i i i

Max.

Synthetics Synthetisch

30-40°C

3.0

Normally soiled blouses, shirts, overalls, etc. made of polyester (Diolen,

Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Ye s

i i i i i i i i i i

Max.

Delicates Fijne was

30°C

1.5

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Ye s

i i

– –

i i i

1000

Wool/

Handwash

Wol/Handwas

cold-40°C

1.0

Woollens, labelled with the Woolmark and identiﬁed as machine washable,

as well as textiles made of silk (keep to care label!), linen, wool and viscose

marked as handwashable.

–

Ye s

i i

– – – – –

i i i

1000

Colours

White Witte was

60°C

7.0

Normally to heavily soiled and robust white cotton laundry.

Save energy by selecting a lower wash temperature and adding an oxygen-based

bleach product, in addition to your detergent.

–

Ye s

i i

–

i i i i i

Max.

Light

colours

Lichte

kleuren

40°C

4.0

White and pastel shaded garments made of delicate fabrics.

Gentle wash programme to avoid graying or yellowing of your laundry.

Use heavy duty detergent, if necessary also stain removers or bleaches on oxygen

basis. Do not use liquid detergent.

Ye s

i i

–

i i

– –

i i i

1000

Dark

Donkere

kleuren

30°C

4.0

Black and dark garments made of cotton, cotton blends and polyester.

Special programme to reduce colour fading and local discolouration.

Prefer to use a special liquid detergent for dark garments with this programme.

Ye s

i i i

–

i i

–

i i i

1000

Eco

Cotton

40°

60°

Katoen

40°

60°

40-60°C

7.0

Normally soiled cotton laundry.

At 40°C and 60°C standard cotton programme and most favourable programme

in terms of combined water and energy consumption for washing cotton laundry. -

Reference programme for the Energy Label.

–

Ye s

i i

– – –

–

i i i

Max.

Speed 15’ Kort 15´

30°C

3.0

Brieﬂy worn clothing made of cotton, artiﬁcial ﬁbres and blends with cotton.

Refresh programme. Use lowest recommended detergent amount.

–

Ye s

i i

– – – – –

i i i

Max.

Rinse & Spin

Spoelen &

Centrif.

– – 7.0

Rinse and intensive spin programme.

Same as the last rinse and the ﬁnal spin in the “Cotton” programme.

– –

– – – –

–

i i i

Max.

Spin Centrifugeren – – 7.0

Intensive spin programme.

Same as the spin cycle in the “Cotton” programme.

– – – – – – – – – –

i i

Max.

Drain Afpumpen – – –

Drain only - no spinning.

Alternative method of terminating programme after “Rinse hold”.

– – – – – – – – – – –

–

Programme

Temperature

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

without “Rapid”

Approx. programme duration

(hours : minutes)

without “Rapid” with “Rapid”

Mixed 40 4.0 48 0.50 1:00 -

Cotton 95 7.0 74** 2.20 2:30 -

Cotton 60 7.0 54 1.19 2:20 1:35

Cotton 40 7.0 66 1.00 2:45 1:15

Synthetics 40 3.0 46 0.70 2:15 0:55

Delicates 30 1.5 60 0.40 0:46 -

Wool/ Handwash 40 1.0 45 0.55 0:40 -

White 60 7.0 68 1.20 2:35 -

Light colours 40 4.0 60 0.45 1:20 -

Dark 30 4.0 40 0.40 1:40 1:15

Speed 15´ 30 3.0 25 0.15 0:15 -

Cotton * 60 7.0 50 0.84 4:00 -

Cotton * 60 3.5 40 0.63 3:00 *** -

Cotton * 40 3.5 40 0.61 3:00*** -

CONSUMPTION DATA

Power consumption in off-mode 0.16 W / in left-on mode 0.16 W

“Rinse hold” button

• The laundry remains in the last rinse water without

pregressing to the ﬁnal spin cycle to avoid creasing

and prevent colours from changing.

• It is particularly useful if you want to postpone spinning

to a later time, or if you want to drain only.

• The wash programme stops to “Rinse hold” when the

“Rinse hold” indicator on the display blinks. The “Start/

Pause” indicator blinks as well.

Terminate the “Rinse hold” option:

• Press the “Start/Pause” button; the programme will

terminate automatically with the ﬁnal spin cycle for the

present wash programme.

• If you do not wish to spin the clothes, turn the

programme selector to the “Drain” programme and

press the “Start/Pause” button.

“Spin” button

• Every programme has a predeﬁned spin speed.

• Press the button to set different spin speed.

• If spin speed “0” is selected, the ﬁnal spinning is

cancelled but intermediate spin peaks remain during

rinse. The water is drained out only.

SET CYCLE END

With this function you can postpone your programme

to complete at a later time: press the button to select in

how many hours the programme shall be ﬁnished. Thus,

it allows you to have your laundry ready at a particular

time and to proﬁt from more favorable energy rates during

the night, for example. Do not use liquid detergent when

activating “Cycle end” option.

• The time until the “Cycle end” can be selected in full

hour time segments (1 to 24 h). When you press the

button, the shortest possible time will be displayed;

keep on pressing the button to loop through all the

available times. To remove it again, keep on pressing

the button until you see the value “0:00”.

• When you have selected the desired time until the

“Cycle end”, press “Start/Pause” - the countdown will

begin.

• During the countdown, you can still modify the

programme setting (select or deselect options, change

spin speed etc.). If the modiﬁcations prolong the

programme duration so that it overruns the originally

set time until the “Cycle end”, the programme will start

immediately.

• Sometimes the programme may ﬁnish before the

selected time until the “Cycle end” has expired (e.g.

for small loads). In this case, the washing machine will

tumble the laundry regularly to keep it fresh, until the

selected “Cycle end” time has expired. During tumbling,

the display will show an animation. The tumbling

phase can be stopped at any time either by pressing

any button or by rotating the programme selector; the

animation will stop and the door will unlock in about 1

minute as indicated on the display.

ECO MONITOR

The „Eco monitor“ gives you a rough feedback about

the power consumption of the programme setting you

selected. As soon as you turn the programme selector to

any programme, the „Eco monitor“ is on.

The indicator on the left is to show that the „Eco monitor“

is active. The four indicators next to it show the degree of

consumption: the less power your programme setting is

forecasted to consume, the less indicators will light up.

• Recommendable for only lightly soiled laundry.

• Not selectable for Cotton 95°C.

“Clean+” button

• Choose this option if you use an in-wash additive for

stain removal (powder, for example “Vanish”) - it will

optimize the additive’s efﬁciency to get better wash

performance and stain removal.

• Use with maximum load.

• Add an appropriate amount of in-wash additive for stain

removal (powder) to the main wash chamber, together

with your detergent (only use powder detergent

with this option). Respect the manufacturer’s dosing

instructions.

• May prolong the programme by up to 15 minutes

• Appropriate for use of stain removers and bleaches on

oxygen basis. Chlorine or perborate bleaches must

not be used!

“Prewash” button

• Adds a prewash cycle to the wash programme

selected; prolongs the programme by about a quarter

of an hour.

• Recommended for heavily soiled laundry (e.g. with

sand or granular dirt).

• Do not use liquid detergent for the main wash when

activating the “Prewash” option.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very

soft water, washing baby linen and helps people with

allergies.

“Easy ironing” button

• Reduces creasing by an increased water quantity and

a very gentle spin.

LOAD LAUNDRY, ADD DETERGENTS

AND SELECT THE PROGRAMME

Load the laundry, close the door and add detergent

as indicated on the front page and as described in the

chapter “Detergent and Additives” in your Instructions

for Use. Turn the programme selector to the desired

programme and temperature. The predeﬁned spin speed

lights up. The “Start/Pause” indicator blinks.

The washing machine is designed to save energy,

therefore, if you have selected a programme but do not

start it within about a quarter of an hour, it will switch off

automatically. To switch it on again, turn the programme

selector to “O” and then to the desired programme again.

SELECT ANY DESIRED OPTION

When the combination of programme and additional

option(s) is not possible, the indication switch off

automatically.

“Colours 15°” button

• Saves energy used for water heating while maintaining

a good wash result.

• Supports colour maintenance when washing coloured

laundry.

• Recommendable for lightly soiled laundry without

stains.

• Make sure that your detergent is suitable for cold wash

temperatures (15 or 20°C).

• Not selectable for Cotton 95°C.

“Rapid” button

• Enables quicker washing by shortening the programme

duration.

This depends on the programme, temperature and options

selected, and also on the size of the wash load. For that

reason, the forecasted degree of power consumption may

adapt when the washing machine detects the wash load.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp

lights to show the door can be opened. As long as a wash

programme is running, the door remains locked and must

not be forced open. In case you have an urgent need to

open it during a running programme, refer to “Reset” a

running programme before the end”.

PROGRAMME START

Open the tap and press the “Start/Pause” button . The

indicator next to the “Start/Pause” button lights up.

When the laundry load is detected or the programme

duration is updated, the display shows an animation.

FAILURE INDICATION

In case of any failures or irregularities, consult the

“Troubleshooting Guide” in your Instructions for Use.

“Water tap closed”: no or not sufﬁcient inlet water

”Service” : failure or malfunction of an electrical

component.

”Clean pump”: waste water is not pumped out.

Spin speed on display blinks: unbalance during

spinning.

PROGRAMME END

The “Door open” indicator lights up, and the display shows

“End”. After about a quarter of an hour, the washing

machine will switch off completely to save energy.

1. Turn the programme selector to the “O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS

AFTER PROGRAMME START

Press the “Start/Pause” button to pause the

programme. The light blinks.

2. Select the new programme, temperature, any options

and another spin speed if you want.

3. Press the “Start/Pause” button again. The new

programme continues at the same position where

the previous programme was interrupted. Do not add

detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME

BEFORE THE END

The “Reset” button cancels a programme before the end.

• Press and hold the “Reset” button for a few seconds;

an animation appears on the display. The water is

drained out; it may last some time until you can open

the door.

- the sensor technology adapts water, energy and programme duration to the size of your wash load.

Consumption values were measured in normalized conditions, in compliance with IEC/EN 60456. In the home, they may vary depending on the individual water

supply pressure and temperature, the load and the type of wash. The consumption data indicated are based on an inlet water temperature of approx. 15°C through

the cold ﬁll valve as well as the hot ﬁll valve (if available). If your washing machine has a hot ﬁll valve, connection of this valve to hot water supply will lower the

energy consumption by reduced heating times, depending on the individual hot ﬁll inlet water temperature. Water and energy consumptions refer to the default

setting of the programmes, with temperature and load as indicated in the table; selecting any options or changing the spin speed will also change the consumption

data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also

“Troubleshooting Guide” in your Instructions for Use).

Approximate remaining moisture content (%). After programme and spinning with maximum selectable spin speed, in default programme setting.

* Reference programmes for Energy Label. For reasons of energy saving, the real water temperature may deviate from the declared cycle temperature.

** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

*** Automatic adaptation of programme duration after detection of wash load

Whirlpool PRIMO 1407 UM Program Chart

Whirlpool PRIMO 1407 UM Program Chart

Whirlpool PRIMO 1407 UM Program Chart

Related papers

Other documents