2. DFI
  3. SD101/SD103-H110 Quick Reference

DFI SD101/SD103-H110 Quick Reference User manual

  • Hello! I've reviewed the Quick Reference guide for the DFI SD101-H110 and SD103-H110 motherboards. This document details the board layouts, jumper settings for power and COM port selection, and safety instructions. I'm familiar with the various connectors, including USB, SATA, LAN, and display outputs, as well as power and battery information. Feel free to ask if you have any specific questions.
  • What type of battery does this board use?
    What is the default factory setting for JP1?
    What are the power requirements for SD101-H110?
    What are the power requirements for SD103-H110?
1
www.dfi.com
Socket LGA1151
2
139
40
LVDS LCD Panel
Mini PCIe
mSATA
LAN 1
LAN 2
DC-in
4-pin Vertical Type (optional)
4-pin
Right Angle
(optional)
DDR4_2 SODIMM
DDR4_1 SODIMM
HDMI/DP
(DP optional)
DVI-I (DVI-D signal)
USB 3-4
USB 3.0
USB 1-2
USB 3.0
S/PDIF
1
10
9
Front Audio
2
1
Buzzer
1
2
Battery
Intel
H110
SPI Flash
BIOS
PCIe 1 (PCIe x4)
10
91
2 10
91
2 10
91
2 10
91
2
COM 2 COM 3 COM 4COM 1
1
1
SATA 0
SATA 3
9
12
10 9
12
10
USB
5-6
USB
7-8
SATA 3.0
1 2
1112
Front
Panel
Digital
I/O
1
USB 2.0
LCD/Inverter
Power
Standby
Power LED
1
1
System Fan 2
System Fan 1
1
1
CPU Fan
Digital
I/O Power
1
SATA
Power
51
62
65
21
3
1
1
1
1
1
1
2
5
6
SMBus
COM 1
RS232/Power
Select (JP2)
LCD/Inverter Power Select (JP7)
Backlight
Power
Select
(JP6)
Panel Power
Select (JP8)
(JP5)
(JP5)
Clear CMOS Data
ASMedia
ASM1442
ASMedia
ASM1442
Intel
WGI211AT
Chassis
Intrusion
ME Disable
1
Quick Reference
SD101/SD103-H110
Board Layout
934-SD1011-0A0G A41213949
Factory Setting (JP1)
(Default 1-2 On)
2Quick Reference |
Factory Setting JP1
For internal use only (default) 1-2 On
LCD/Inverter Power Select JP7
+12V (default) 1-2 On
+5V 2-3 On
Panel Power Select JP8
+12V 1-2 On
+5V 3-4 On
+3.3V (default) 5-6 On
Backlight Power Select JP6
+3.3V (default) 1-2 On
+5V 2-3 On
Clear CMOS Data JP5
Normal (default) 1-2 On
Clear CMOS Data 2-3 On
COM 1 RS232/Power Select JP2
RS232 (default) 1-3 (RI), 2-4 (DCD) On
RS232 with power 3-5 (+5V), 4-6 (+12V) On
Note:
1. SD101-H110: Single 12V +/-10% DC.
2. SD103-H110: Wide range 15~36V.
DFI reserves the right to change the specifications at any time prior to the
product's release. This QR may be based on editions that do not resemble your
actual products. For more documentation and drivers, please visit the download
page at go.dfi.com/SD101_SD103-H110, or via the QR code to the right.
The lithium ion battery powers the real-time clock and CMOS mem-
ory. It is an auxiliary source of power when the main power is shut
off.
• Danger of explosion if battery incorrectly replaced.
• Replace only with the same or equivalent type recommend by the
manufacturer.
• Dispose of used batteries according to local ordinance.
Battery Usage
Safety Measures
SD101/SD103-H110
Jumper Settings
/