Big Lots 810569918 75 Inch LED White Metal Tree User manual

Lighted SMD Tree

Operation and Safety Instructions

- FOR INDOOR AND OUTDOOR USE -

PARTS:

Part

Description

Illustration

Qty

Lower Body

Pole A

Pole B

Tree

Plastic Ties

Ground Stakes

To Assemble

1. Remove all the parts from the box carefully and lay out the components.

2. Insert the thick head of the Pole A (B) into the corresponding hole on the Base (A) and tighten

up screw on the Base (A).

3. Insert the thin head of the Pole (A) into the rings of the first and second circles of the Tree

(D).

4. Insert the thin head of the Pole B (C) into the third and top circles of the Tree (D). Make sure

insert the Pole B (C) into the Tree (D) below the second circle as below picture showed. Insert

the thin head of the Pole A (B) into the thick head of the Pole B(C).

5. Place the star of the Tree (D) on the top of the Pole B (C).Hang the rubber bands on the

corresponding hooks on the Base (A).

6. Secure the installing points with plastic ties and secure the base to the soft ground by fully

inserting 4 stakes into the ground.

To Use

1. To illuminate, plug the adapter into a standard 120-volt AC electrical outlet.

2. To shut off, unplug the adapter from the outlet.

Distributed By:

Big Lots Stores, Inc.

PO Box 28523

Columbus, OH

43228-0523