STEMCO 577-1062 Axle Pro Installation guide

Axle Pro Installation Instructions

Supplement for 84.056.07

For your protection, Use Standard Shop Safety Procedures during this process

Page 1 of 2 01 577 1062 November 2010

This is the modified instructions for the popular 5000lbs GM Axle

1. Install special mandrels.

(Reference page 8 item C of standard

instructions)

2. Place special alignment bushing over

upper mandrel.

3. Place upper plate over upper mandrel

and alignment bushing.

(Reference page 10 steps A & B

standard instruction)

Axle Pro Installation Instructions

Supplement for 84.056.07

For your protection, Use Standard Shop Safety Procedures during this process

Page 2 of 2 01 577 1062 November 2010

4. Place second special alignment

bushing into hole on lower plate.

5. Place lower plate with special

alignment bushing over lower

mandrel, attach lower assembly to

upper assembly using threaded rods

and nuts.( Reference to standard

instruction page 10 & 11)

6. When these components are applied

properly with the standard

components, machining of the 5000

lbs GM axle is easily accomplished.