Soyal APP Owner's manual

Brand: Soyal

Model: APP

Type: Owner's manual

SOYAL APP

721APP / 727APP

V221104

4-2-182

Part 4 Software Operation / Chapter 2 701ClientSQL

12. Special Application

12.4.3 Application 3：SOYAL 721 APP / 727 APP

SOYAL 721 APP Function : The user can use mobile phone to control SOYAL controller reader via Ethernet,

721 APP support to remote open the door lock, monitor and display the controller status of arming, disarm,

alarm on mobile phone.

Now the APP can be downloaded on Google store for Android system.

721 APP Setting Procedures

Step 1. Install 721 APP and then open it

Step 2. Enter Account and Password (Both default account and default password is admin)

• Account：admin (default account)

• Password：admin (default password)

Step 1.

Step 2.

4-2-183

ACCESS & INDUSTRIAL CONTROL

SOYAL TECHNOLOGY CO.,LTD.

SOYAL Product Line Training Course

Step 3. Click "Add" to set up controller connection

Step 4. Enter name / IP Address /communication/ Port Number /Node ID, click “Add” button

4-1 Controller connection directly to 721APP (without installation and connection to

701ServerSQL)

E Series controller wired directly to 721APP through RJ45, LAN Base Setting of Port

is equivalent to Node ID + 6000.

H/E Series controller controller connected to 721APP through TCP to RS485

converter AR-727-CM / AR-401-IO-0808U2-R

4-2 Controller connected to 721APP and also 701ServerSQL

If controller is connected to both 721APP and 701ServerSQL, in 721APP network

setting IP Address enter with 701ServerSQL's [Local TCP-LINK Address](Default IP

Address setting is 127.0.0.1, please change to your PC's IP address. Refer to NOTE)

and Port enter with 701ServerSQL's [Port]

Step 5. Click the blue button to connect the controller

Step 3.

Step 4.

Step 5.

Node ID Model No. IP Address Port

001

327E/3xxE/7xxE/

8xxE/716v5.

192.168.1.101 6001

002 192.168.1.102 6002

003 192.168.1.103 6003

Converter IP Address. Channel Port

First unit of AR-727-CM 192.168.1.200

CH1 7001

CH2 7002

Second unit of AR-727-CM

192.168.1.201 CH1 7003

CH2 7004

NOTENOTE

Step 2. Step 3.

˙This features required connection to the internet. Step below is how to know your PC's IP Address:

Step 1. Search for [Command Prompt]

Step 2. Enter [ipcong] and press [Enter]

Step 3. IPv4 Address is your PC's IP address. In this example, 192.168.1.82 is the IP Address.

Step 1.

4-2-184

Part 4 Software Operation / Chapter 2 701ClientSQL

12. Special Application

Step 7.

Change login account and password

7-1 Click the symbol in the upper right corner

7-2 Click Settings in the upper right corner

7-3 Select [Change Account]/[Change Password] to enter new Account and new Password

Step 7-1. Step 7-2.

Step 7-3.

Video : 《SOYAL APP & WEB》SOYAL 721 APP

More Details :

Step 6. Enter 721 APP function page

6-1 Display Door open/ close status

6-2 Display Door Relay output status

6-3 Touch Arming button, the device will enter Arming Mode.

Touch Disarm button, exit arming mode.

6-4 Slide the rst button to right, the function is to open the door lock based on

the setting of Door Relay time and the door lock will be automatically closed after the

setting door time is end.

6-5 Slide the middle button to right, the door lock will keep unlock

6-6 Till to Slide the bottom button to right, the door lock will be lock again

Step 6-1. Step 6-2.

Step 6-3.

Step 6-4.

Step 6-5.

Step 6-6.

4-2-185

ACCESS & INDUSTRIAL CONTROL

SOYAL TECHNOLOGY CO.,LTD.

SOYAL Product Line Training Course

SOYAL 727 APP Function: SOYAL network Digital I/O Module support to monitor DI/DO status and remote

control DO output; AR-727-CM-IO is built-in 8 DI and 4 DO (built-in one Relay on the rst DO0 point) that can be

used in monitoring door sensor status, high/low water level detection, push button and other status detection,

as well as switch, ashing buzzer, electric lock and other equipment on / o control.

Now the APP can be downloaded on Google store for Android system or download from SOYAL ocial website.

727 APP Setting Procedures

Step 1. Install 721 APP and then open it

Step 2. Click Settings in the upper right corner

Step 3. Set the following information: account (User) / Password /IP Address / Port Number/

Change Device Name / DI_0~DI7 / DO_0~DO_3

Step 2.

Step 3.

4-2-186

Part 4 Software Operation / Chapter 2 701ClientSQL

12. Special Application

Step 4. Enter 727 APP function operation page

4-1 Real-time DI status display

4-2 Real-time DO output control; enter output seconds and slide the button to right

(the range of seconds is 0.1~600 seconds)

Step 4-1.

Step 4-2.

Video : 《SOYAL APP & WEB》SOYAL 727 APP Introduction

More Details :

Soyal APP Owner's manual

Soyal APP Owner's manual

Related papers

Other documents