Synology RKS1314 Hardware Installation Guide

Synology
Brand
Synology
Model
RKS1314
Category
Rack accessories
Type
Hardware Installation Guide

Synology RKS1314 is a rail kit that enables you to mount your Synology RackStation or Expansion Unit in a standard 19-inch rack. The rail kit includes all the necessary hardware for installation, and it can be easily assembled and disassembled. With the RKS1314, you can securely mount your Synology device in a rack, which can help to save space and improve airflow.

Synology RKS1314 is a rail kit that enables you to mount your Synology RackStation or Expansion Unit in a standard 19-inch rack. The rail kit includes all the necessary hardware for installation, and it can be easily assembled and disassembled. With the RKS1314, you can securely mount your Synology device in a rack, which can help to save space and improve airflow.

Welcome! Read This First
Synology America Corp.
13343 NE Bel-Red Road,
Bellevue, WA 98005,
USA
Tel : +1 425 818 1587
Synology Inc.
3F-3, No. 106,
Chang An W. Rd., Taipei,
Taiwan
Tel : +886 2 2552 1814
Synology France
39 rue Louis Blanc,
92400 Courbevoie,
France
Tel :+33 (0) 1 47 17 62 88
Synology GmbH
Grafenberger Allee 125,
40237 Düsseldorf,
Deutschland
Tel : +49 211 9666 9666
Synology UK Ltd.
Etheridge Avenue, Brinklow,
Milton Keynes, MK10 0BP,
United Kingdom
Tel : +44 1908 587422
RKS1314 Quick Installation Guide
1.
x2
x5 x9
Attach the rail assembly to your rack by inserting the brackets into the
guide holes. Use the big screws to secure the assembly if necessary.
A
B
Before starting, make sure you have the following:
1. Another person to help with installation.
2. A screw driver (only for 13-series and older RackStation models).
3. Your RackStation or Expansion Unit.
FrontRear
Front
2.
3.
Attach the panels to the sides of the unit.
4.
Slide the panels forward to secure.
13-series and older models require securing the panels
with the small screws.
Copyright © 2013, Synology Inc. All rights reserved. Synology, the Synology logo are trademarks or registered trademarks of Synology Inc. Other product and company names mentioned herein may be trademarks of their respective companies.
www.synology.com
Rail Kit Installation
Extend the rails. Then pull the arrow-shaped latches to unlock and remove the smallest panels.
5.
Insert the unit into the rail assembly. Because the unit might be heavy, we recommend asking another person to help.
6.
Pull the latches on the smallest panel to unlock the rails and
slide the unit into the rack.
Gently push the unit inside. Be careful not to hurt your fingers.
7.
1.
Remove the unit and smallest panels from the rail assembly. Remove any screws if necessary and press the latches on the
panels to remove them from the unit.
2.
3.
Reinsert the panels into the rail assembly and slide them all the
way in.
Remove any screws if necessary and press the latches located
on the brackets to release the rails from the rack.
4.
Front
A
B
Rail Kit Removal
  • Page 1 1
  • Page 2 2

Synology RKS1314 Hardware Installation Guide

Synology
Brand
Synology
Model
RKS1314
Category
Rack accessories
Type
Hardware Installation Guide

Synology RKS1314 is a rail kit that enables you to mount your Synology RackStation or Expansion Unit in a standard 19-inch rack. The rail kit includes all the necessary hardware for installation, and it can be easily assembled and disassembled. With the RKS1314, you can securely mount your Synology device in a rack, which can help to save space and improve airflow.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers