Ctouch Laser Air + Quick start guide

Brand: Ctouch

Model: Laser Air +

Category: Network switches

Type: Quick start guide

Ctouch Laser Air + is a powerful and versatile interactive display that can enhance your presentations, lessons, and collaborations. With its cutting-edge laser technology, you can enjoy precise and responsive touch control, making it ideal for interactive whiteboarding, annotation, and other touch-based applications. The display's high resolution and wide viewing angles ensure that everyone in the room can clearly see the content, while its built-in speakers and microphone provide crystal-clear audio for video conferencing and multimedia playback.

Smart innovation!

QUICK START GUIDE TURNING THE CTOUCH INTERACTIVE DISPLAY ON OR OFF

1. Plug the power cord into an AC power outlet.

2. Press Power Switch on the CTOUCH interactive display.

3. Now the CTOUCH is in standby mode. Wait a moment until the power indicator lights up, then press to turn

on the CTOUCH interactive display.

NOTE: Be sure to wait for a few seconds before pressing  button. If you promptly press  button then the CTOUCH

interactive display may not respond or act wrongly.

4. Press  button again to turn oﬀ the CTOUCH and put the display in standby mode.

5. To cut oﬀ the power completely, press Power Switch on the back of the CTOUCH .

NOTE: If the CTOUCH interactive display does not receive a displaying signal for a certain time, the CTOUCH goes into

standby mode.

CONNECTIONS

• When connecting an external device to the CTOUCH interactive display, make sure that the CTOUCH and the

external device are turned oﬀ .

• Check the plugs at the ends of the cables to make sure that they are the correct type before plugging them into

the jacks on the CTOUCH interactive display.

• Make sure that all plugs are securely inserted into the jacks. Loose connections can result in image or color

problems.

• The illustration of the external device may be diﬀ erent depending on your model.

• Refer to the operating manual of the external device as well.

NOTE: For an overview of the possible external connections, please refer to the CTOUCH user manual!!

1USB(2.0)(for camera)

This port is connected to PC when current source is PC (internal Easy air PC), but is changed

to Android if current source is Android Launcher.

NOTE: Please open the dust cover before being used.

2Internal PC module slot Insert the CTOUCH Easy air PC module (Optional).

Power LED

Remote control sensor

Power

Red: In standby mode.

White: In power on mode.

Aim the remote control towards this spot on the CTOUCH interactive display.

Switch the CTOUCH interactive display power on or oﬀ .

NOTE: When the CTOUCH interactive display is turn on, press to display the navigation bar,

if this button is pressed about two seconds to turn oﬀ the CTOUCH and put the

display in standby mode.

4USB port for CTOUCH Android Launcher.

5USB for Easy air PC module.

NOTE: If no Easy air PC, the USB port has no function.

6AC IN Plug the AC cord into this jack .(AC 100-240V 50/60Hz).

7Fuse 12A 250V.

8Power Switch Push to (I) to connect the power, push to (O) to cut oﬀ the power.

1VGA OUT Output for the currently selected VGA IN 1/2/3 signal.

2VGA IN 1/2/3 Connect the video/audio for a computer to these ports.

3 USB2.0/3.0 Connect USB devices to these ports.

4HDMI1/2 IN

HDMI1(MHL): Connect an MHL - enabled device such as a cell phone to this jack to view

the external device’s screen on your screen.

HDMI2(ARC): Connect an ARC-enabled home theater receiver to this jack.

5DP (Display Port) Input Connect an external device to DP out jack.

6 (Antenna) Wi-Fi antenna.

7TOUCH OUT1/2

Output the touch for external devices connected to HDMIx, DP or

VGAx port which support touch system.

NOTE: By default TOUCH OUT 2 has priority over TOUCH OUT 1, this can be altered in the

menu.

8RS232 For control and monitoring screen via RS232 protocol.

9WAN IN The built-in router input port. Connect to the external network.

10 LAN OUT The built-in router output port. Connection to another computer or other Internet

enabled devices.

11 AV IN Input port for composite video.

12 S/PDIF digital audio OUT Connect an optical audio cable.

13 Connect a 3.5 mm Mini Jack. The CTOUCH interactive display is the current audio output.

OPERATING THE NAVIGATION BAR SYSTEM SETTINGS

Slide up from the bottom

of the screen center by

two or more ﬁ ngers open

the Navigation Bar

Display menu

Setting menu

Source menu

User Manual

Previous screen

Homepage

(Android Interface)

Application history

Annotation

Volume bar

Turn oﬀ the display

Applications list

Shortcuts of favorite

application

NOTES:

1. The layout of menu may vary upon diﬀ erent models.

2. Design and speciﬁ cations are subject to change without notice.

Show all apps screen saver Display System Storage Display information

Network Setting

Set date and time

NOTE: To manually

set date and time,

you should toggle

“Automatic date &

time” to OFF.

Automatic search for Bluetooth devices

To set on-screen language

To set default input method

To set Android keyboard(AOSP)

To set Security and Restrictions

Allow installation of apps from sources other than the Play Store

ENVIRONMENTAL PROTECTION

Waste electrical products should not be disposed of with household waste. Please recycle where facilities

exist. Check with your Local Authority or retailer for recycling advice.

REMOTE CONTROL

Switch the CTOUCH interactive

display power on or oﬀ

Volume down Volume up

To conﬁ rm or enter a sub-menu or toggle between

options during MENU operation.

Use Arrow buttons to navigate in on-screen menu.

Return to previous menu

or exit the on-screen menu

Display or exit the setting menu screen

Zoom in on Windows / OS

Zoom out on Windows / OS

Show the most-recently used Apps

NOTES:

• This operation manual provides

a description based on operating

functions with the remote control.

• In diﬀ erent mode, some buttons may

have diﬀ erent function.

Switch the CTOUCH interactive

display power on or oﬀ Display or exit input source menu

To conﬁ rm or enter a sub-menu or toggle

between options during MENU operation.

Use Arrow buttons to navigate in on-screen menu.

Display desktop (Home page) on the screen

Display or exit the setting menu screen

Mute the sound

Freeze the current picture

Volume down

Return to previous menu or exit the on-screen menu

Turn oﬀ the picture on the CTOUCH interactive

diaplay and listen to the program audio only.

Volume up

Take a screenshot and store the data onto your

connected USB storage device.

If there is no USB storage, the screenshot will be

stored on the built-in storage.

Set the built-in WiFi

System settings

Ethernet setting

Reset internal router by hardware.

Password is required for this operation

and is the same password as to access

the Lock menu. (the default password

is 0000)

Internal routing setting

IP settings

Proxy settings

Input the default UserName: admin.

Skip the default password setting as

there is no default password and then

press the login button.

Change the UserName and

Password: Select Management and

then Password.

NETWORK SETTINGS

WIRED NETWORK SETTING INTERNAL ROUTER

THERE ARE 2 WAYS TO SET UP A WIRED NETWORK: EASY SET WIZARD AND ADVANCED MODE.

Input the default UserName: admin. Skip the

default password setting as there is no default

password and then press the login button. Select Easy Set Wizard

Select GATEWAY

Select GATEWAY Select WIRELESS ISP

Select WIRELESS ISP

There are ﬁ ve methods to connect with a network, choose your preferred one. RECOMMENDED TO SELECT THE DHCP CLIENT

CONNECTION.

DHCP CLIENT: Automatically obtain IP information from your

ISP. If your ISP doesn’t provide a designated IP

for you, then choose DHCP Client.

STATIC IP: If all Internet IP information is provided by

your ISP, then choose Static IP.

PPPOE: Ethernet Point to Protocol. Your ISP will

provide you with Login ID andpassword.

Usually this option is applicable to DSL service.

PPTP: Point to Point Tunneling Protocol. Your

ISP will provide you with Login ID and

password.

L2TP: Layer 2 Tunneling Protocol. Your ISP will

provide you with Login ID and password.

Usually this option is applicable to DSL

service.

Password setting format

WiFi password of internal router in the

CTOUCH interactive display (Password should

be set at least 8 characters)

Password setting format

WiFi password of internal router in the

CTOUCH interactive display (Password should

be set at least 8 characters)

If you get an IP

address the setting

is succesfull/you

succesfully set the

internet connection.

Successfully connected

to return

Select Site Survey Conﬁ rm Site Survey

Select your

desired WiFi

signal

Input password

Connect

Get IP adress, setting successfully

WIRELESS NETWORK SETTING BUILTIN WIFI CARD

Turn on or oﬀ the built-in WiFi

Display all of the WiFi sites avaible

Connect to WPS (WiFi Protected Setup) router

Add a new network manually

Scanning WiFi direct device

Setting Portable WiFi hotspot

Setting Mcast

CTOUCHimPD170217

Ctouch Laser Air + Quick start guide

Brand: Ctouch

Model: Laser Air +

Category: Network switches

Type: Quick start guide

Download PDF

report

Ctouch Laser Air + Quick start guide

Ctouch Laser Air + Quick start guide

Related papers

Other documents