Peerless KIP546-S User guide

Category
Flat panel floor stands
Type
User guide

Peerless KIP546-S is a kiosk designed for indoor use. It has a sturdy construction and is intended to be placed on a flat, hard, and level surface to prevent tipping. The kiosk comes with a variety of screws and washers to ensure compatibility with different mounting scenarios. It features a VESA pattern that supports mounting screens with a wide range of sizes, from 200mm to 800mm. To ensure a secure fit, the kiosk utilizes a combination of screws and spacers, with clear instructions provided in the manual.

Peerless KIP546-S is a kiosk designed for indoor use. It has a sturdy construction and is intended to be placed on a flat, hard, and level surface to prevent tipping. The kiosk comes with a variety of screws and washers to ensure compatibility with different mounting scenarios. It features a VESA pattern that supports mounting screens with a wide range of sizes, from 200mm to 800mm. To ensure a secure fit, the kiosk utilizes a combination of screws and spacers, with clear instructions provided in the manual.

1
(2013-08-09 ) #:150-9006-8 (2014-09-16 )
ENG
KIP540, KIP540-S,
KIP542, KIP542-S,
KIP546, KIP546-S,
KIP547, KIP547-S,
KIP555, KIP555-S
2
(2013-08-09 ) #:150-9006-8 (2014-09-16 )
ENG - Do not begin to install product until you have read and understood the instructions and warnings
contained in this user guide. Always use an assistant or mechanical lifting equipment to safely lift and position
equipment. This product must be installed onto at, hard, level surface to prevent tipping. This product is
intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury. To
reduce the risk of electric shock or re, do not expose product to water or moisture. Be sure power cord is routed
so that it will not be tripped on, stepped on, or pinched by heavy items. Avoid overloading electrical outlets or
extension cords. Always disconnect the power cord from the power outlet when installing, servicing, or not using
the product for an extended period of time. Do not block ventilation slots or fan exhaust on product. Blocking
air ow could damage product. Arrange product to allow air to ow freely around product. Keep product away
from direct sunlight or any source of heat. For support please call 800-4-SIGNAGE.
WARNING
Symbols
ENG
WARNING
ENG
#
Skip to step.
ENG
x3
Screws must get at least three
full turns and t snug.
ENG
Front of mount.
ENG
F
Do not overtighten screws.
ENG
Tools Needed for Assembly.
ENG
7/16"
(11mm)
3
(2013-08-09 ) #:150-9006-8 (2014-09-16 )
Parts (Before beginning, make sure you have all parts shown below).
ENG
A
(
1
)
kiosk
J
(
2
)
key
B (4)
M5 x 12 mm
C (4)
M5 x 25 mm
D (4)
M6 x 12 mm
E (4)
M6 x 25 mm
M5/M4/M6 washer
H (4)
M8 x 12 mm
F (4)
M8 x 25 mm
G (4)
spacer
I (4)
K
(
1
)
t- wrench
Parts List
KIP540
KIP540-S
Part #
KIP542
KIP542-S
Part #
KIP546
KIP546-S
Part #
KIP547
KIP547-S
Part #
KIP555
KIP555-S
Part #
Description Qty
A kiosk BLK
kiosk SLV
1 150-P1065
150-4065
150-P1068
150-4068
150-P1058
150-4058
150-P1060
150-4060
150-P1061
150-4061
B M5 x 12mm 4 520-1027 520-1027 520-1027 520-1027 520-1027
C M5 X 25mm 4 520-9543 520-9543 520-9543 520-9543 520-9543
D M6 x 12mm 4 520-1128 520-1128 520-1128 520-1128 520-1128
E M6 x 25mm 4 520-1208 520-1208 520-1208 520-1208 520-1208
F M8 x 12mm 4 520-9571 520-9571 520-9571 520-9571 520-9571
G M8 x 25mm 4 520-1031 520-1031 520-1031 520-1031 520-1031
H M5/M4/M6 multi washer 4 580-1398 580-1398 580-1398 580-1398 580-1398
I spacer 4 540-1059 540-1059 540-1059 540-1059 540-1059
J key 2 565-0049A 565-0049A 565-0049A 565-0049A 565-0049A
K t-wrench 1 560-1718 560-1718 560-1718 560-1718 560-1718
4
(2013-08-09 ) #:150-9006-8 (2014-09-16 )
1
J
(
2
)
5
(2013-08-09 ) #:150-9006-8 (2014-09-16 )
2
6
(2013-08-09 ) #:150-9006-8 (2014-09-16 )
3
7/16"
(11mm)
7
(2013-08-09 ) #:150-9006-8 (2014-09-16 )
E
F
I
3-1
VESA PATTERN
H
B
x3
I
H
G
D
H
G
I
H
200mm
300mm
400mm
600mm
800mm
8
(2013-08-09 ) #:150-9006-8 (2014-09-16 )
4
7/16"
(11mm)
9
(2013-08-09 ) #:150-9006-8 (2014-09-16 )
5
K
(
1
)
K
(
1
)
F
2 Places
4 Places
**
**
**
**
**
*
*
*
10
(2013-08-09 ) #:150-9006-8 (2014-09-16 )
6
7
Slot
ENG
Tab
ENG
Slot
ENG
Tab
ENG
J
(
2
)
11
(2013-08-09 ) #:150-9006-8 (2014-09-16 )
8
Power Strip not included
ENG
12
(2013-08-09 ) #:150-9006-8 (2014-09-16 )
9
9a 9b
Slot
ENG
Tab
ENG
Slot
ENG
Tab
ENG
10
Power Cord
ENG
9a
13
(2013-08-09 ) #:150-9006-8 (2014-09-16 )
9b-1
Knock Out
ENG
9b
14
(2013-08-09 ) #:150-9006-8 (2014-09-16 )
10
J
(
2
)
9b-2
Slot
ENG
Slot
ENG
Tab
ENG
Power Cord
ENG
Tab
ENG
15
(2013-08-09 ) #:150-9006-8 (2014-09-16 )
Patent Pending
Peerless Industries, Inc. (“Peerless”) warrants to original end-users of Peerless
®
products will be free from defects in material and
workmanship, under normal use, for a period of ve years from the date of purchase by the original end-user (but in no case longer than
six years after the date of the product's manufacture). At its option, Peerless will repair or replace, or refund the purchase price of, any
product which fails to conform with this warranty.
In no event shall the duration of any implied warranty of merchantability or tness for a particular purpose be longer than the
period of the applicable express warranty set forth above. Some states do not allow limitations on how long a implied warranty lasts,
so the above limitation may not apply to you.
This warranty does not cover damage caused by (a) service or repairs by the customer or a person who is not authorized for such service
or repairs by Peerless, (b) the failure to utilize proper packing when returning the product, (c) incorrect installation or the failure to follow
Peerless' instructions or warnings when installing, using or storing the product, or (d) misuse or accident, in transit or otherwise, including
in cases of third party actions and force majeure.
In no event shall Peerless be liable for incidental or consequential damages or damages arising from the theft of any product,
whether or not secured by a security device which may be included with the Peerless
®
product. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
This warranty is in lieu of all other warranties, expressed or implied, and is the sole remedy with respect to product defects. No dealer,
distributor, installer or other person is authorized to modify or extend this Limited Warranty or impose any obligation on Peerless in
connection with the sale of any Peerless
®
product.
This warranty gives speci c legal rights, and you may also have other rights which vary from state to state.
LIMITED FIVE-YEAR WARRANTY
Peerless-AV Europe
Unit 3 Watford Interchange,
Colonial Way, Watford, Herts,
WD24 4WP, United Kingdom
Customer Care
44 (0) 1923 200 100
www.peerless-av.com
© 2014, Peerless Industries, Inc.
Peerless-AV de Mexico
Ave de las Industrias 413
Parque Industrial Escobedo
Escobedo N.L Mexico 66050
Servicio al Cliente
01-800-849-65-77
www.peerless-av.com
© 2014, Peerless Industries, Inc.
Peerless-AV
2300 White Oak Circle
Aurora, IL 60502
Ph: (800) 865-2112
Fax: (800) 359-6500
www.peerless-av.com
© 2014, Peerless Industries, Inc.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Peerless KIP546-S User guide

Category
Flat panel floor stands
Type
User guide

Peerless KIP546-S is a kiosk designed for indoor use. It has a sturdy construction and is intended to be placed on a flat, hard, and level surface to prevent tipping. The kiosk comes with a variety of screws and washers to ensure compatibility with different mounting scenarios. It features a VESA pattern that supports mounting screens with a wide range of sizes, from 200mm to 800mm. To ensure a secure fit, the kiosk utilizes a combination of screws and spacers, with clear instructions provided in the manual.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI