In Win IW-R400 User manual

Category
Computer cases
Type
User manual
IW-R400 Chassis Quick Reference
Front 120mm Fan
A: Power ON Switch
B: System Reset Button
C: Power LED
D: HDD LED
E: LAN1 LED
F: LAN2 LED
G: Alarm LED
H: 2 x USB 2.0 Port
3 x 3.5” Internal Hard Drive
CEB M/B (12”x10.5”)
7 Slot Card Retainer
Optional Rear 80mm Fans
Key lock
External
3 x 5.25” Bay
+ 2 x 3.5” Bay
Optional PSU
Top Cover
1. Release two screws to remove the
5.25” cage set out of the chassis
2. Release two screws of the holding plate
3. Remove the holding plate
4. Rotate the 5.25” device cage set
5. Put down the holding plate
6. Attach back with all the screws
AB C D E F G
H
Rear Windows Configuration
2 x 80mm Rear Fan (Optional)
PSU (Option) PSU (Option) 7 x PCI Slot
1. Insert 2 x 80mm fan into the
module on the fan holder
2. Put down the fan, assemble
on the rear windows till lock
1. Release one thumb screws
2. Pull out the front fan assembly kit
and disconnect the fan power for
fan connector
1. Release six screws of rack ear on
each side
2. Put the foot stand on the chassis
left use the four hooks into
specified mounting holes
3. Slide it toward until you hear a
crack sound
2
2
4
5
3
2
2
2
3
1
1
1
1
1
Press
Press
This unit must be operated
with the chassis
TOP COVER
installed to ensure proper cooling
CAUTION
Pedestal Foot-stand Installation
2
1
1. Attach four screws to ensure HDD
2. Put down the HDD assembly kit and move
forward to fix in place position
3. Use one screw to fix HDD assembly set
1. Put the top plastic cover snaps on the
top chassis
2. Push toward to let the positions pins
into holes totally until you hear a crack
sound
  • Page 1 1

In Win IW-R400 User manual

Category
Computer cases
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI