ONKYO HT-S9305THX User manual

English Français

AV Receiver

HT-R980

Instruction Manual

Thank you for purchasing an Onkyo AV Receiver. Please

read this manual thoroughly before making connections

and plugging in the unit.

Following the instructions in this manual will enable you

to obtain optimum performance and listening enjoyment

from your new AV Receiver.

Please retain this manual for future reference.

Manuel d’instructions

Merci d’avoir porté votre choix sur le ampli-tuner Audio-

Video de Onkyo. Veuillez lire attentivement ce manuel

avant de connecter l’appareil et de le mettre sous tension.

Observez les instructions données dans ce manuel afin de

pouvoir profiter pleinement de votre nouveau ampli-tuner

Audio-Video.

Conservez ce manuel afin de pouvoir le consulter

ultérieurement.

Introduction .............................En-2

Introduction ..............................Fr-2

Connections...........................En-11

Branchements ........................Fr-11

Turning On &

Basic Operations ..............En-20

Mise sous tension et

opérations de base............Fr-20

Advanced Operations ...........En-36

Opérations plus

sophistiquées.....................Fr-36

Controlling iPod & Other

Components......................En-56

Commande d’un iPod et

d’autres appareils..............Fr-56

Others.....................................En-64

Autres ......................................Fr-64

F

r

E

n

2

En

Introduction

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult

an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Use only with the cart, stand,

tripod, bracket, or table speci-

fied by the manufacturer, or

sold with the apparatus. When

a cart is used, use caution

when moving the cart/appara-

tus combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualified service personnel. Ser-

vicing is required when the apparatus has been dam-

aged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has

been dropped.

15. Damage Requiring Service

Unplug the apparatus from the wall outlet and refer

servicing to qualified service personnel under the fol-

lowing conditions:

A. When the power-supply cord or plug is damaged,

B. If liquid has been spilled, or objects have fallen

into the apparatus,

C. If the apparatus has been exposed to rain or water,

D. If the apparatus does not operate normally by fol-

lowing the operating instructions. Adjust only

those controls that are covered by the operating

instructions as an improper adjustment of other

controls may result in damage and will often

require extensive work by a qualified technician to

restore the apparatus to its normal operation,

E. If the apparatus has been dropped or damaged in

any way, and

F. When the apparatus exhibits a distinct change in

performance this indicates a need for service.

16. Object and Liquid Entry

Never push objects of any kind into the apparatus

through openings as they may touch dangerous volt-

age points or short-out parts that could result in a fire

or electric shock.

The apparatus shall not be exposed to dripping or

splashing and no objects filled with liquids, such as

vases shall be placed on the apparatus.

Don’t put candles or other burning objects on top of

this unit.

17. Batteries

Always consider the environmental issues and follow

local regulations when disposing of batteries.

18. If you install the apparatus in a built-in installation,

such as a bookcase or rack, ensure that there is ade-

quate ventilation.

Leave 20 cm (8") of free space at the top and sides and

10 cm (4") at the rear. The rear edge of the shelf or

board above the apparatus shall be set 10 cm (4")

away from the rear panel or wall, creating a flue-like

gap for warm air to escape.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPARATUS TO

RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO

USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within

the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE

NE PAS

OUVRIR

AVIS

PORTABLE CART WARNIN

G

S3125A

3

En

Precautions

1. Recording Copyright—Unless it’s for personal use

only, recording copyrighted material is illegal without

the permission of the copyright holder.

2. AC Fuse—The AC fuse inside the unit is not user-ser-

viceable. If you cannot turn on the unit, contact your

Onkyo dealer.

3. Care—Occasionally you should dust the unit all over

with a soft cloth. For stubborn stains, use a soft cloth

dampened with a weak solution of mild detergent and

water. Dry the unit immediately afterwards with a

clean cloth. Don’t use abrasive cloths, thinners, alco-

hol, or other chemical solvents, because they may

damage the finish or remove the panel lettering.

4. Power

WARNING

BEFORE PLUGGING IN THE UNIT FOR THE

FIRST TIME, READ THE FOLLOWING SECTION

CAREFULLY.

AC outlet voltages vary from country to country.

Make sure that the voltage in your area meets the volt-

age requirements printed on the unit’s rear panel (e.g.,

AC 230 V, 50 Hz or AC 120 V, 60 Hz).

The power cord plug is used to disconnect this unit

from the AC power source. Make sure that the plug is

readily operable (easily accessible) at all times.

Pressing ON/STANDBY to select Standby mode does

not fully shutdown the unit. If you do not intend to use

the unit for an extended period, remove the power cord

from the AC outlet.

5. Preventing Hearing Loss

Caution

Excessive sound pressure from earphones and head-

phones can cause hearing loss.

6. Batteries and Heat Exposure

Warning

Batteries (battery pack or batteries installed) shall not

be exposed to excessive heat as sunshine, fire or the

like.

7. Never Touch this Unit with Wet Hands—Never han-

dle this unit or its power cord while your hands are

wet or damp. If water or any other liquid gets inside

this unit, have it checked by your Onkyo dealer.

8. Handling Notes

• If you need to transport this unit, use the original

packaging to pack it how it was when you originally

bought it.

• Do not leave rubber or plastic items on this unit for

a long time, because they may leave marks on the

case.

• This unit’s top and rear panels may get warm after

prolonged use. This is normal.

• If you do not use this unit for a long time, it may not

work properly the next time you turn it on, so be

sure to use it occasionally.

For U.S. models

FCC Information for User

CAUTION:

The user changes or modifications not expressly approved

by the party responsible for compliance could void the

user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation.

This equipment generates, uses and can radiate radio fre-

quency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee

that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio

or television reception, which can be determined by turn-

ing the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit differ-

ent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV techni-

cian for help.

For Canadian Models

NOTE: THIS CLASS B DIGITAL APPARATUS COM-

PLIES WITH CANADIAN ICES-003.

For models having a power cord with a polarized plug:

CAUTION: TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE SLOT,

FULLY INSERT.

Modèle pour les Canadien

REMARQUE: CET APPAREIL NUMÉRIQUE DE

LA CLASSE B EST CONFORME À LA NORME NMB-

003 DU CANADA.

Sur les modèles dont la fiche est polarisée:

ATTENTION: POUR ÉVITER LES CHOCS ÉLEC-

TRIQUES, INTRODUIRE LA LAME LA PLUS LARGE

DE LA FICHE DANS LA BORNE CORRESPON-

DANTE DE LA PRISE ET POUSSER JUSQU’AU

FOND.

4

En

For British models

Replacement and mounting of an AC plug on the power

supply cord of this unit should be performed only by qual-

ified service personnel.

IMPORTANT

The wires in the mains lead are coloured in accordance

with the following code:

Blue: Neutral

Brown: Live

As the colours of the wires in the mains lead of this appa-

ratus may not correspond with the coloured markings

identifying the terminals in your plug, proceed as follows:

The wire which is coloured blue must be connected to the

terminal which is marked with the letter N or coloured

black.

The wire which is coloured brown must be connected to

the terminal which is marked with the letter L or coloured

red.

IMPORTANT

The plug is fitted with an appropriate fuse. If the fuse

needs to be replaced, the replacement fuse must approved

by ASTA or BSI to BS1362 and have the same ampere rat-

ing as that indicated on the plug. Check for the ASTA

mark or the BSI mark on the body of the fuse.

If the power cord’s plug is not suitable for your socket out-

lets, cut it off and fit a suitable plug. Fit a suitable fuse in

the plug.

For European Models

Supplied Accessories

Make sure you have the following accessories:

*

In catalogs and on packaging, the letter at the end of the prod-

uct name indicates the color. Specifications and operations are

the same regardless of color.

Installing the Batteries

Note

• If the remote controller

doesn’t work reliably, try

replacing the batteries.

• Don’t mix new and old

batteries or different

types of batteries.

• If you intend not to use

the remote controller for

a long time, remove the batteries to prevent damage from leak-

age or corrosion.

• Remove expired batteries as soon as possible to prevent damage

from leakage or corrosion.

Aiming the Remote Controller

To use the remote controller, point it at the AV receiver’s

remote control sensor, as shown below.

Declaration of Conformity

We,

ONKYO EUROPE

ELECTRONICS GmbH

LIEGNITZERSTRASSE 6,

82194 GROEBENZELL,

GERMANY

GROEBENZELL, GERMANY

ONKYO EUROPE ELECTRONICS GmbH

K. MIYAGI

declare in own responsibility, that the ONKYO product

described in this instruction manual is in compliance with the

corresponding technical standards such as EN60065,

EN55013, EN55020 and EN61000-3-2, -3-3.

Indoor FM antenna (➔ 18)

AM loop antenna (➔ 18)

Speaker setup microphone (➔ 24)

Remote controller and two batteries (AA/R6)

Using the Remote Controller

Batteries (AA/R6)

Remote control sensor

AV receiver

Approx. 16 ft. (5 m)

5

En

Contents

Important Safety Instructions ......................................... 2

Precautions....................................................................... 3

Supplied Accessories...................................................... 4

Using the Remote Controller .......................................... 4

Features ............................................................................ 6

Front & Rear Panels......................................................... 7

Front Panel..................................................................... 7

Display............................................................................ 8

Rear Panel ..................................................................... 8

Remote Controller............................................................ 9

Controlling the AV Receiver ........................................... 9

About Home Theater...................................................... 10

Enjoying Home Theater................................................ 10

Connecting the AV Receiver ......................................... 11

Connecting Your Speakers .......................................... 11

About AV Connections ................................................. 14

Connecting Your Components with HDMI.................... 15

Connecting Your Components ..................................... 16

Connecting Onkyo Components ............................ 17

Connecting Antenna..................................................... 18

Which Connections Should I Use?............................... 18

Turning On/Off the AV Receiver ................................... 20

Turning On ................................................................... 20

Turning Off ................................................................... 20

Basic Operations............................................................ 21

Selecting the Language Used

for the Onscreen Setup Menus.................................. 21

Playing the Connected Component.............................. 21

Displaying Source Information ..................................... 21

Setting the Display Brightness ..................................... 21

Muting the AV Receiver................................................ 22

Using the Sleep Timer.................................................. 22

Selecting Speaker Layout ............................................ 22

Using the Audio and Video Menus ............................... 22

Changing the Input Display .......................................... 23

Using Headphones....................................................... 23

Audyssey 2EQ

®

Room Correction

and Speaker Setup .................................................... 23

Listening to the Radio ................................................... 26

Using the Tuner............................................................ 26

Presetting FM/AM Stations........................................... 27

Using RDS (European models) .................................... 27

Recording ....................................................................... 29

Using the Listening Modes ........................................... 30

Selecting Listening Modes ........................................... 30

About Listening Modes................................................. 31

Advanced Setup .............................................................36

On-screen Setup Menus...............................................36

Common Procedures in Setup Menu ...........................36

Input/Output Assign ......................................................37

Speaker Setup..............................................................39

Audio Adjust .................................................................42

Source Setup................................................................43

Listening Mode Preset..................................................47

Miscellaneous...............................................................48

Hardware Setup............................................................49

Lock Setup....................................................................50

Using the Audio Settings ..............................................50

Zone 2..............................................................................53

Connecting Zone 2 .......................................................53

Setting the Powered Zone 2 .........................................54

Using Zone 2 ................................................................54

Controlling iPod .............................................................56

Connecting an Onkyo Dock..........................................56

Using the Onkyo Dock..................................................57

Controlling Your iPod.................................................... 58

Controlling Other Components..................................... 60

Preprogrammed Remote Control Codes ......................60

Looking up for Remote Control Code ...........................60

Entering Remote Control Codes...................................61

Remote Control Codes for Onkyo Components

Connected via ......................................................61

Resetting REMOTE MODE Buttons .............................62

Resetting the Remote Controller ..................................62

Controlling Other Components .....................................62

Troubleshooting .............................................................64

Specifications .................................................................69

About HDMI.....................................................................70

Using an RIHD-compatible TV, Player, or Recorder ...71

Video Resolution Chart..................................................73

Introduction

Connections

Turning On & Basic Operations

Advanced Operations

Controlling iPod & Other Components

Others

To reset the AV receiver to its factory defaults, turn it

on and, while holding down VCR/DVR, press

ON/STANDBY (➔ 64).

6

En

Features

Amplifier

• 130 Watts/Channel @ 6 ohms

• WRAT–Wide Range Amplifier Technology

(5 Hz to 100 kHz bandwidth)

• Optimum Gain Volume Circuitry

• H.C.P.S. (High Current Power Supply) Massive High

Power Transformer

Processing

•THX

*1

Integrated System Certified

• THX Surround EX

*1

, THX I/S

*1

Cinema, THX Music

Mode

• HDMI Video Upscaling (to 1080p Compatible) with

Faroudja DCDi Cinema Enhancement

• HDMI (Ver.1.4a with Audio Return Channel, 3D), Deep-

Color, x.v.Color

*

, Lip Sync, DTS

*2

-HD Master Audio,

DTS-HD High Resolution Audio, Dolby TrueHD

*3

,

Dolby Digital Plus, DSD and Multi-CH PCM

• Dolby Pro Logic IIz

*3

– New Surround Format (front-

high)

• Non-Scaling Configuration

•A-Form Listening Mode Memory

• Direct Mode

• Music Optimizer

*4

for Compressed Digital Music files

• 192 kHz/24-bit D/A Converters

• Powerful and Highly Accurate 32-bit Processing DSP

• Jitter Cleaning Circuit Technology

Connections

• 4 HDMI

*5

Inputs and 1 Output

• Onkyo for System Control

• 4 Digital Inputs (2 Optical/2 Coaxial)

• Component Video Switching (2 Inputs/1 Output)

• Front “Line in” Input for Portable audio player

• Universal Port for the Dock for iPod

*

/HD Radio™

*6

tuner module (North American models)/DAB+ tuner

module (European models)

• Banana Plug-Compatible Speaker Posts

*7

• Powered Zone 2

Miscellaneous

• 40 FM/AM Presets

• Audyssey 2EQ

®*8

to Correct Room Acoustic Problems

• Audyssey Dynamic EQ

®*8

for Loudness Correction

• Audyssey Dynamic Volume

®*8

to Maintain Optimal

Listening Level and Dynamic Range

• Crossover Adjustment

(40/50/60/70/80/90/100/120/150/200 Hz)

• A/V Sync Control Function (up to 200 ms)

• On-Screen Display via HDMI

• Preprogrammed -Compatible Remote

*1

THX and the THX logo are trademarks of THX Ltd. which

*2

Manufactured under license under U.S. Patent #'s: 5,451,942;

5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535;

7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and

worldwide patents issued & pending. DTS and the Symbol are

registered trademarks, & DTS-HD, DTS-HD Master Audio,

and the DTS logos are trademarks of DTS, Inc. Product

includes software.

*3

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, “Surround EX” and the double-D sym-

bol are trademarks of Dolby Laboratories.

*4

Music Optimizer™ is a trademark of Onkyo Corporation.

*5

“HDMI, the HDMI Logo, and High-Definition Multimedia

Interface are trademarks or registered trademarks of HDMI

Licensing LLC in the United States and other countries.”

*6

HD Radio™ and the HD Radio Ready logo are proprietary

trademarks of iBiquity Digital Corporation.

To receive HD Radio broadcasts, you must install an Onkyo

UP-HT1 HD Radio tuner module (sold separately).

*7

In Europe, using banana plugs to connect speakers to an audio

amplifier is prohibited.

*8

Manufactured under license from Audyssey Laboratories™.

U.S. and foreign patents pending. Audyssey 2EQ

®

,

Audyssey Dynamic Volume

®

and Audyssey Dynamic EQ

®

are registered trademarks and trademarks of

Audyssey Laboratories.

*

iPod is a trademark of Apple Inc., registered in the U.S. and

other countries.

*

“x.v.Color” is a trademark of Sony Corporation.

THX

The HT-R980, jointly developed by Onkyo and THX

Ltd., provides home theater enthusiasts the perfect blend

of performance and ease of use. All of the components in

this THX Certified System are engineered to work seam-

lessly together to deliver exceptional entertainment expe-

riences. Whether you are watching a movie, listening to

music, or playing the hottest new video game, the

HT-R980 will transform your room into the ultimate

entertainment environment.

7

En

Front & Rear Panels

North American models

European models

The actual front panel has various logos printed on it. They are not shown here for clarity.

The page numbers in parentheses show where you can find the main explanation for each item.

ON/STANDBY button (➔ 20)

STANDBY indicator (➔ 20)

HDMI THRU indicator (➔ 50)

ZONE 2 indicator (➔ 54)

Remote control sensor (➔ 4)

ZONE 2, OFF, ZONE 2 LEVEL/TONE LEVEL

and TONE buttons (➔ 51, 54 to 55)

Display (➔ 8)

LISTENING MODE buttons (MOVIE/TV, MUSIC

and GAME) (➔ 30)

DIMMER button (North American models) (➔ 21)

MEMORY button (➔ 27)

TUNING MODE button (➔ 26)

DISPLAY button (➔ 21)

SETUP button (➔ 36)

TUNING, PRESET (➔ 26 to 27), arrow and

ENTER buttons

RETURN button

MASTER VOLUME control (➔ 21)

THX button (➔ 30)

PHONES jack (➔ 23)

Input selector buttons (BD/DVD, VCR/DVR,

CBL/SAT, GAME, AUX, TUNER, TV/CD and

PORT) (➔ 21)

AUX INPUT LINE IN jack (➔ 16)

AUX INPUT VIDEO jack (➔ 16)

AUX INPUT AUDIO jacks (➔ 16)

SETUP MIC jack (➔ 24)

RT/PTY/TP button (European models) (➔ 27)

Front Panel

8

En

For detailed information, see the pages in parentheses.

Audio input indicators

Listening mode and format indicators (➔ 30, 51)

Audyssey indicators (➔ 23, 40, 43)

Tuning indicators (➔ 26)

RDS indicator (European models) (➔ 27)

SLEEP indicator (➔ 22)

MUTING indicator (➔ 22)

Message area

DIGITAL IN OPTICAL and COAXIAL jacks

COMPONENT VIDEO IN and OUT jacks

HDMI IN and OUT jacks

FM ANTENNA jack and AM ANTENNA terminal

MONITOR OUT V jack

UNIVERSAL PORT jack

SPEAKERS terminals

(CENTER, FRONT, SURR and SURR BACK OR

FRONT HIGH)

Power cord

REMOTE CONTROL jack

Composite video and analog audio jacks

(BD/DVD IN, VCR/DVR IN and OUT, CBL/SAT IN,

GAME IN and TV/CD IN)

ZONE 2 LINE OUT jacks

SUBWOOFER PRE OUT jack

FRONT HIGH OR ZONE 2 SPEAKERS terminals

Display

Rear Panel

See “Connecting the AV Receiver” for connection infor-

mation (➔ 11 to 19).

9

En

Remote Controller

*1

To control component, you must first enter remote control

code.

See “Entering Remote Control Codes” for more details

(➔ 61)

*2

This button acts as a shortcut for the Video menu (➔ 22)

*3

This button acts as a shortcut for the Audio menu (➔ 22)

For detailed information, see the pages in parentheses.

ON/STANDBY button (➔ 20)

REMOTE MODE/INPUT SELECTOR buttons

(BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX,

TUNER, TV/CD and PORT) (➔ 21)

SP LAYOUT button (➔ 22)

Arrow / / / and ENTER buttons

SETUP button (➔ 36)

LISTENING MODE buttons (MOVIE/TV, MUSIC,

GAME and STEREO) (➔ 30)

DIMMER button (➔ 21)

DISPLAY button (➔ 21)

MUTING button (➔ 22)

VOL / button ( ➔ 21)

VIDEO button (➔ 22)

RETURN button

AUDIO button (➔ 22)

SLEEP button (➔ 22)

■ Controlling the tuner

To control the AV receiver’s tuner, press TUNER (or

RECEIVER).

You can select AM or FM by pressing TUNER repeatedly.

Arrow / buttons ( ➔ 26)

D.TUN button (➔ 26)

DISPLAY button

CH +/– button (➔ 27)

Number buttons (➔ 26)

Controlling the AV Receiver

*1

*2

*3

To control the AV receiver, press RECEIVER to select

Receiver mode.

You can also use the remote controller to control

Onkyo Blu-ray Disc/DVD player, CD player and

other components.

See “Entering Remote Control Codes” for more

details (➔ 61).

10

En

About Home Theater

Thanks to the AV receiver’s superb capabilities, you can enjoy surround sound with a real sense of movement in your

own home—just like being in a movie theater or concert hall. With Blu-ray Discs or DVDs, you can enjoy DTS and

Dolby Digital. With analog or digital TV, you can enjoy Dolby Pro Logic IIx, DTS Neo:6, or Onkyo’s original DSP lis-

tening modes.

And you can use THX Surround EX to expand 5.1-channel sources for 7.1-channel playback.

Enjoying Home Theater

Front speakers

These output the overall sound. Their role in a home theater is to pro-

vide a solid anchor for the sound image. They should be positioned

facing the listener at about ear level, and equidistant from the TV.

Angle them inward so as to create a triangle, with the listener at the

apex.

Center speaker

This speaker enhances the front speakers, making sound movements

distinct and providing a full sound image. In movies it’s used mainly

for dialog. Position it close to your TV facing forward at about ear

level, or at the same height as the front speakers.

Surround speakers

These speakers are used for precise sound positioning and to add real-

istic ambience. Position them at the sides of the listener, or slightly

behind, about 2 to 3 feet (60 to 100 cm) above ear level. Ideally they

should be equidistant from the listener.

Subwoofer

The subwoofer handles the bass sounds of the LFE (Low-Frequency

Effects) channel. The volume and quality of the bass output from your

subwoofer will depend on its position, the shape of your listening

room, and your listening position. In general, a good bass sound can be

obtained by installing the subwoofer in a front corner, or at one-third

the width of the wall, as shown.

Surround back speakers

These speakers are necessary to enjoy Dolby Digital EX, DTS-ES

Matrix, DTS-ES Discrete, THX Surround EX, etc. They enhance the

realism of surround sound and improve sound localization behind the

listener. Position them behind the listener about 2 to 3 feet (60 to

100 cm) above ear level.

Front high speakers

These speakers are necessary to enjoy Dolby Pro Logic IIz Height.

They significantly enhance the spatial experience. Position them at

least 3.3 feet (100 cm) above the front speakers (preferably as high as

possible) and at an angle slightly wider than the front speakers.

Corner

position

1/3 of wall

position

Tip

• To find the best position for your subwoofer, while

playing a movie or some music with good bass,

experiment by placing your subwoofer at various

positions within the room, and choose the one that

provides the most satisfying results.

11

En

Connections

Connecting the AV Receiver

Speaker Configuration

The following table indicates the channels you should use

depending on the number of speakers that you have.

For 7.1-channel surround-sound playback, you need 7

speakers and a powered subwoofer.

*1

If you’re using only one surround back speaker, connect it to

the SURR BACK OR FRONT HIGH L terminals.

*2

Front high and surround back speakers cannot be used at the

same time.

*3

(North American models) When you connect the front high

left and right speakers, prepare for it separately, or use the sur-

round back left and right speakers.

No matter how many speakers you use, a powered sub-

woofer is recommended for a really powerful and solid

bass.

To get the best from your surround sound system, you

need to set the speaker settings. You can do this automati-

cally (➔ 24) or manually (➔ 39).

Speaker Connection Precautions

Read the following before connecting your speakers:

• You can connect speakers with an impedance of between

6 and 16 ohms. If you use speakers with a lower imped-

ance, and use the amplifier at high volume levels for a

long period of time, the built-in amp protection circuit

may be activated.

• Disconnect the power cord from the wall outlet before

making any connections.

• Read the instructions supplied with your speakers.

• Pay close attention to speaker wiring polarity. In other

words, connect positive (+) terminals only to positive (+)

terminals, and negative (–) terminals only to negative (–)

terminals. If you get them the wrong way around, the

sound will be out of phase and will sound unnatural.

• Unnecessarily long, or very thin speaker cables may

affect the sound quality and should be avoided.

• Be careful not to short the positive and negative wires.

Doing so may damage the AV receiver.

• Make sure the metal core of the wire does not have con-

tact with the AV receiver’s rear panel. Doing so may

damage the AV receiver.

• Don’t connect more than one cable to each speaker ter-

minal. Doing so may damage the AV receiver.

• Don’t connect one speaker to several terminals.

Connecting Your Speakers

Number of channels 234567789

Front speakers ✔✔✔✔✔✔✔✔✔

Center speaker ✔ ✔✔✔✔✔✔

Surround speakers ✔✔✔✔✔✔✔

Surround back speaker

*1*2

✔✔

Surround back speakers

*2

✔✔

Front high speakers

*2*3

✔✔✔

12

En

Connecting the Speaker Cables

Screw-type speaker terminals

Using Banana Plugs (North American models)

• If you are using banana plugs, tighten the speaker terminal before inserting the banana plug.

• Do not insert the speaker code directly into the center hole of the speaker terminal.

Push-type speaker terminals

The following illustration shows which speaker should be connected to each pair of terminals. If you’re using only one

surround back speaker, connect it to the SURR BACK OR FRONT HIGH L terminals.

■ North American models

Strip 1/2" to 5/8" (12 to 15 mm) of

insulation from the ends of the

speaker cables, and twist the bare

wires tightly, as shown. (Supplied

speaker cables are already stripped.)

1/2" to 5/8"(12 to 15 mm)

Strip 3/8" to 1/2" (10 to 12 mm) of insulation from the ends of

the speaker cables, and twist the bare wires tightly, as shown.

(Supplied speaker cables are already stripped.)

3/8" to 1/2"(10 to 12 mm)

Surround

back right

speaker

Surround

back left

speaker

White

Center speaker

Powered

subwoofer

Front right

speaker

Front left

speaker

RedBlueGray Green

Surround

right

speaker

Surround

left

speaker

Front high

right

speaker

(Optional)

Front high

left

speaker

(Optional)

BrownTan

13

En

■ European models

*

Using the supplied RCA cable, connect the subwoofer’s LINE INPUT jack to your AV receiver’s SUBWOOFER PRE OUT jack.

Note

• The front high speakers can also be connected to the SURR BACK OR FRONT HIGH SPEAKERS terminals. When doing so, set

“Surr Back/Front High” in Speaker Setup to “Front High” (➔ 39).

Using Dipole Speakers

You can use dipole speakers for the surround and surround

back speakers. Dipole speakers output the same sound in two

directions.

Dipole speakers typically have an arrow printed on them to

indicate how they should be positioned. The surround dipole

speakers should be positioned so that their arrows point

toward the TV/screen, while the surround back dipole speak-

ers should be positioned so that their arrows point toward

each other, as shown.

Front speakers

Center speaker

Surround speakers

Subwoofer

Surround back speakers

Front high speakers

Surround

back right

speaker

(Optional)

Surround

back left

speaker

(Optional)

White

Center speaker

Powered

subwoofer

Front right

speaker

Front left

speaker

RedBlueGray Green

Surround

right

speaker

Surround

left

speaker

Front high

right

speaker

(Optional)

Front high

left

speaker

(Optional)

TV/screen TV/screen

Dipole speakers

Normal speakers

14

En

Connected image with AV components

• Before making any AV connections, read the manuals supplied with your AV components.

• Don’t connect the power cord until you’ve completed and double-checked all AV connections.

• Push plugs in all the way to make good connections (loose connections can cause noise or malfunc-

tions).

• To prevent interference, keep audio and video cables away from power cords and speaker cables.

AV Cables and Jacks

*

Available sampling rate for PCM input signal is 32/44.1/48/88.2/96 kHz. Even 176.4/192 kHz is effective in case of the HDMI con-

nection.

Note

• The AV receiver does not support SCART plugs.

• The AV receiver’s optical digital jacks have shutter-type covers that open when an optical plug is inserted and close when it’s removed.

Push plugs in all the way.

Caution

• To prevent shutter damage, hold the optical plug straight when inserting and removing.

About AV Connections

Signal Cable Jack Description

Video and

Audio

HDMI HDMI connections can carry digital video and audio.

Video Component video Component video separates the luminance (Y) and color

difference signals (P

B/CB, PR/CR), providing the best pic-

ture quality (some TV manufacturers label their compo-

nent video sockets slightly differently).

Composite video Composite video is commonly used on TVs, VCRs, and

other video equipment.

Audio Optical digital

audio

Optical digital connections allow you to enjoy digital

sound such as PCM

*

, Dolby Digital or DTS. The audio

quality is the same as coaxial.

Coaxial digital

audio

Coaxial digital connections allow you to enjoy digital

sound such as PCM

*

, Dolby Digital or DTS. The audio

quality is the same as optical.

Analog audio

(RCA)

Analog audio connections (RCA) carry analog audio.

1/8" (3.5 mm)

Stereo mini plug

This cable carries analog audio.

HDMI cable Other cables

: Video & Audio

: Video

: Audio

Game console

Blu-ray Disc/

DVD player

TV, projector, etc.

Game console

Blu-ray Disc/

DVD player

TV, projector, etc.

AV receiverAV receiver

Right!

Wrong!

HDMI

Y

P

B/CB

PR/CR

Green

Blue

Red

V

Yellow

OPTICAL

Orange

L

R

White

Red

15

En

Connect your components to the appropriate jacks. The default input assignments are shown below.

✔: Assignment can be changed (➔ 37).

Refer to “About HDMI” (➔ 70) and “Using an RIHD-compatible TV, Player, or Recorder” (➔ 71).

■ Audio return channel (ARC) function

Audio return channel (ARC) function enables an HDMI capable TV to send the audio stream to the HDMI OUT of the

AV receiver. To use this function, you must select the TV/CD input selector.

• To use ARC function, you must select the TV/CD input selector, your TV must support ARC function and “HDMI

Control (RIHD)” is set to “On”(

➔ 49).

Tip

• To listen to audio received by the HDMI IN jacks through your TV’s speakers:

– Set the “TV Control” setting to “On” (➔ 50) for an -compatible TV.

– Set the “Audio TV Out” setting to “On” (➔ 49) when the TV is not compatible with or the “TV Control” setting to “Off”.

– Set your Blu-ray Disc/DVD player’s HDMI audio output setting to PCM.

– To listen to TV audio through the AV receiver, see “Connecting Your Components” (➔ 16).

Note

• When listening to an HDMI component through the AV receiver, set the HDMI component so that its video can be seen on the TV

screen (on the TV, select the input of the HDMI component connected to the AV receiver). If the TV power is off or the TV is set to

another input source, this may result in no sound from the AV receiver or the sound may be cut off.

•When the “Audio TV Out” setting is set to “On” (➔ 49) to hear from your TV’s speakers, by controlling the AV receiver’s volume,

the sound will be output from the AV receiver’s speakers, too. When the

“TV Control” setting is set to “On” (➔ 50) to hear from

speakers of -compatible TV, by controlling the AV receiver’s volume, the AV receiver’s speakers will produce sound while the

TV’s speakers are muted. To stop the AV receiver’s speakers producing sound, change the settings, change your TV’s settings, or turn

down the AV receiver’s volume.

Connecting Your Components with HDMI

Jack Signal Components Assignable

Input HDMI IN 1 Audio/Video Blu-ray Disc/DVD player ✔

HDMI IN 2 VCR or DVD recorder/Digital Video Recorder ✔

HDMI IN 3 Satellite, cable, set-top box, etc. ✔

HDMI IN 4 Game console ✔

Output HDMI OUT TV, projector, etc.

Game console

VCR or DVD recorder/Digital Video Recorder

TV, projector, etc.

Satellite, cable, set-top box, etc. Blu-ray Disc/DVD player

16

En

Connect your components to the appropriate jacks. The default input assignments are shown below.

✔: Assignment can be changed (➔ 38).

Note

*1

Connect a turntable (MM) that has a phono preamp built-in. If your turntable (MM) doesn’t have it, you’ll need a commercially

available phono preamp.

If your turntable has a moving coil (MC) type cartridge, you’ll need a commercially available MC head amp or MC transformer as

well as a phono preamp. See your turntable’s manual for details.

• When you connect to both AUX INPUT AUDIO jacks and AUX INPUT LINE IN jack at the same time, AUX INPUT LINE IN jack

will be given a higher priority.

• The AV receiver can output audio and video signals from the AUX INPUT jacks to the VCR/DVR OUT jacks.

• With connection , you can listen and record audio from the external components while you are in Zone 2. You can listen and record

audio from the external components in the main room; you can listen to the audio in Zone 2 as well.

• With connection , you can enjoy Dolby Digital and DTS. (To record or listen in Zone 2 as well, use and .)

• With connection , if your Blu-ray Disc/DVD player has both the main ster eo and multichannel outputs, be sure to connect the main

stereo.

■ How to record the video

With the connections described above, you cannot record the video through the AV receiver. To make a connection for

video recording (➔ 29).

Connecting Your Components

The on-screen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to

the MONITOR OUT V or the COMPONENT VIDEO OUT, use the AV receiver’s display when changing settings.

No. Jack Signal Components Assignable

AUX INPUT LINE IN Analog audio Portable audio player

VIDEO Composite video Camcorder, etc

AUDIO L/R Analog audio

COMPONENT

VIDEO

IN 1 (BD/DVD) Component video Blu-ray Disc/DVD player ✔

IN 2 (CBL/SAT) Satellite, cable, set-top box, etc. ✔

OUT TV, projector, etc.

DIGITAL IN OPTICAL IN 1 (GAME) Digital audio Game console ✔

IN 2 (TV/CD) TV, CD player ✔

COAXIAL IN 1 (BD/DVD) Blu-ray Disc/DVD player ✔

IN 2 (CBL/SAT) Satellite, cable, set-top box, etc. ✔

MONITOR OUT Composite video TV, projector, etc.

BD/DVD IN Analog audio and

composite video

Blu-ray Disc/DVD player

VCR/DVR IN VCR or DVD recorder/Digital

Video Recorder

CBL/SAT IN Satellite, cable, set-top box, etc.

GAME IN Game console

TV/CD IN Analog audio

TV, CD player, Turntable

*1

,

Cassette tape deck, MD, CD-R

UNIVERSAL PORT Analog audio/

Video

Universal port optional dock

(UP-A1 etc.)

Front Rear

17

En

With (Remote Interactive), you can use the following

special functions:

■ System On/Auto Power On

When you start playback on a component connected via

while the AV receiver is on Standby, the AV

receiver will automatically turn on and select that com-

ponent as the input source.

■ Direct Change

When playback is started on a component connected via

, the AV receiver automatically selects that compo-

nent as the input source.

■ Remote Control

You can use the AV receiver’s remote controller to con-

trol your other -capable Onkyo components, point-

ing the remote controller at the AV receiver’s remote

control sensor instead of the component. You must enter

the appropriate remote control code first (➔ 61).

Note

•Use only cables for connections. cables are supplied

with Onkyo players (DVD, CD, etc.).

• Some components have two jacks. You can connect either

one to the AV receiver. The other jack is for connecting addi-

tional -capable components.

• Connect only Onkyo components to jacks. Connecting other

manufacturer’s components may cause a malfunction.

• Some components may not support all functions. Refer to

the manuals supplied with your other Onkyo components.

• While Zone 2 is on, the System On/Auto Power On and Direct

Change functions do not work.

• Do not use connections if you use HDMI Control (RIHD)

(➔ 49).

Connecting Onkyo Components

Step 1:

Make sure that each Onkyo component is connected

with an analog audio cable (connection in the hookup

examples) (➔ 16).

Step 2:

Make the connection (see illustration below).

Step 3:

If you’re using an RI Dock, or cassette tape deck,

change the Input Display (➔ 23).

LR

IN

BD/DVD

L

R

IN

TV/CD

L

R

REMOTE

CONTROL

ANALOG

AUDIO OUT

LR

ANALOG

AUDIO OUT

e.g., CD player

e.g., DVD player

18

En

This section explains how to connect the supplied indoor FM antenna and AM loop antenna.

The AV receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use

the tuner.

Note

• Once your AV receiver is ready for use, you’ll need to tune into a radio station and position the antenna to achieve the best possible

reception.

• Keep the AM loop antenna as far away as possible from your AV receiver, TV, speaker cables, and power cords.

Tip

• If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available outdoor FM antenna instead.

• If you cannot achieve good reception with the supplied indoor AM loop antenna, try using it with a commercially available outdoor AM

antenna.

The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format

you choose will depend on the formats supported by your components. Use the following sections as a guide.

Video Connection Formats

Video component can be connected by using any one of the following video connection formats: composite video, com-

ponent video, or HDMI, the latter offering the best picture quality.

For optimal video performance, THX recommends that

video signals pass through the system without upconver-

sion (e.g., component video input through to component

video output).

To by-pass video upconversion in the AV receiver, simulta-

neously press the VCR/DVR and RETURN on the AV

receiver. While continuing to hold down the VCR/DVR,

press RETURN to toggle until “Skip” appears on the dis-

play. Release both buttons.

To use the video upconversion in the AV receiver, repeat

the above process until “Use” appears on the display and

release the buttons.

Video input signals flow through the AV receiver as shown,

with composite video and component video sources all being

upconverted for the HDMI output.

The composite video and component video outputs pass through their respective input signals as they are.

When you connect audio component to an HDMI or COMPONENT input, you must assign that input to an input selector

(➔ 37, 38).

Connecting Antenna

Which Connections Should I Use?

The on-screen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to

the MONITOR OUT V or the COMPONENT VIDEO OUT, use the AV receiver’s display when changing settings.

Thumbtacks, etc.

Insert the plug fully

into the jack.

Insert the plug fully

into the jack.

North American

models

European models

Push. Insert wire. Release.

Assembling the AM loop antenna.

Indoor FM antenna (supplied)

AM loop antenna (supplied)

Caution

• Be careful that you don’t injure yourself when

using thumbtacks.

IN

MONITOR OUT

Blu-ray Disc/DVD player, etc.

AV receiver

TV, projector, etc.

Composite

Component

Video Signal Flow Chart

HDMI

19

En

■ Signal Selection

If signals are present at more than one input, the inputs will

be selected automatically in the following order of priority:

HDMI, component video, composite video.

However, for component video only, regardless of whether a

component video signal is actually present, if a component

video input is assigned to the input selector, that component

video input will be selected. And if no component video

input is assigned to the input selector, this will be interpreted

as no component video signal being present.

In the Signal Selection Example shown on the right, video

signals are present at both the HDMI and composite video

inputs, however, the HDMI signal is automatically selected

as the source and video is output by the HDMI outputs.

Audio Connection Formats

Audio component can be connected by using any of the

following audio connection formats: analog, optical, coax-

ial, or HDMI.

When choosing a connection format, bear in mind that the

AV receiver does not convert digital input signals for ana-

log line outputs and vice versa. For example, audio signals

connected to an optical or coaxial digital input are not out-

put by the analog VCR/DVR OUT.

If signals are present at more than one input, the inputs

will be selected automatically in the following order of pri-

ority: HDMI, digital, analog.

IN

MONITOR OUT

Blu-ray Disc/DVD player, etc.

AV receiver

TV, projector, etc.

Composite

Component

Signal Selection Example

HDMI

IN

OUT

*

1

*

2

*

1

*

1

*

1

Blu-ray Disc/DVD player, etc.

AV receiver

TV, projector, etc.

HDMICoaxial Analog

Audio Signal Flow Chart

HDMI Analog

Optical

*1

Depends on the “Audio TV Out” setting (➔ 49).

*2

This setting is available, when “Audio Return Channel”

setting is set to “Auto” (➔ 50), you must select the TV/CD

input selector and your TV must support ARC function.

20

En

Turning On & Basic Operations

Turning On/Off the AV Receiver

Turning On

Press ON/STANDBY on the front panel.

or

Press RECEIVER followed by ON/STANDBY on the remote controller.

The AV receiver comes on, the display lights, and the STANDBY indicator goes off.

Turning Off

Press ON/STANDBY on the front panel or the remote controller.

The AV receiver will enter Standby mode. To prevent any loud surprises when you turn on the AV receiver, always

turn down the volume before you turn it off.

ON/STANDBY

RECEIVER

ON/STANDBY

STANDBY indicator

Page is loading ...

ONKYO HT-S9305THX User manual

This manual is also suitable for

ONKYO HT-S9305THX User manual

in other languages

Related papers

Other documents