SWITEL BF500 Owner's manual

Page is loading ...

19

1 Important Safety Information

1. Carefully read these operating instructions and keep in a safe place.

2. The appliance is not a toy! Children are unaware of the dangers of electrical appliances.

Never leave children unattended while the appliance is within reach.

3. Make sure the mains voltage matches the specifications on the nameplate at the bottom of

the appliance. Run the appliance on AC voltage only.

4. Check that the mains lead is laid securely.

Attention: The appliance is not a TOY! Keep out of the reach of children.

Operate the appliance on dry, solid, even and heat−resistant surfaces only.

5. Before heating baby food, always check that there is water in the tank.

Attention: The tank and the water in it will become very hot during use and may cause

scalds. Immediately cool any scalded areas and directly consult a doctor.

6. Remove the lid from the jar before heating the baby food in it.

7. Do not heat baby food repeatedly.

8. Do not keep food warm for more than 1 hour because its hygienic quality may degrade other-

wise.

9. Unplug the appliance from the mains after use and before cleaning it.

10. Do not immerse the appliance in water for cleaning.

2 Intended Use

The baby bottle warmer and food heater accepts all baby bottles (with standard and wide

neck) and is a convenient means of heating food in jars or tins. It is designed for kitchen use.

Any other use is considered unintended use. Unauthorised modification or reconstruction is

not permitted. Under no circumstances open the device or complete any repair work yourself.

20

3 Operating Elements

Power cable and mains plug

Insert for bottle / jar / tin

Thermostat dial

Thermostat switch

Container

4 Use and Care

Connecting the appliance

Attention: Prior to use, check that the mains voltage matches the specifications on

the nameplate at the bottom of the appliance.

1. Put up the appliance on a dry, solid, even and heat−resistant

surface out of the reach of children.

2. Always fill in water before turning on the appliance.

3. Attach the bottle warmer to a mains outlet and turn the tem-

perature control to the appropriate point on the dial (1 to

7)/(warm to hot).

21

Warming baby bottles

1. Put the bottle on the insert and place the insert in the contai-

ner.

2. Fill the container with water up to bottle content level but no

higher than 10 mm below the top edge of the container.

3. The container must not overflow and the water must not rise

above the edge of the bottle.

4. Heating times depend on the amount, initial temperature

and consistency of the food being warmed up. Adjust the

temperature control (1 to 7)/(warm to hot) to find the perfect

setting.

5. Do not heat the baby food until you need it. Do not keep food

warm for more than 1 hour because its hygienic quality may

degrade otherwise.

6. Before feeding your child, shake the bottle and check the

temperature of the food (e.g. by letting some of the liquid

drop on the back of your hand).

Heating and keeping warm jars / tins

1. Remove the lid from the jar or tin before heating the baby

food in it.

2. Put the jar / tin with mash or similar on the insert and place

the insert in the container.

3. Fill the container with water up to jar / tin content level but no

higher than 10 mm below the top edge of the container.

4. Heating times depend on the amount, initial temperature and consistency of the food

being warmed up. Adjust the temperature control (1 to 7)/(warm to hot) to find the per-

fect setting each time.

5. Occasionally stir the food being warmed up.

6. Do not heat the baby food until you need it. Do not keep food warm for more than 1

hour because its hygienic quality may degrade otherwise.

7. Before feeding, check the temperature of the food.

Note: When removing anything from the container, mind that both the appliance and

the food (bottles / jars / tins) become very hot!

22

General information

Note: You can choose to turn the temperature up or down. Assuming the milk you are

warming comes straight from the fridge (5 °C), it will take approx. 10 − 12 minutes to

warm it (125 ml in normal bottle). Milk at room temperature will warm up more quickly.

The light above the thermostat dial tells you that the appliance is on and that food is being

warmed. It will extinguish when the food has warmed to the correct temperature.

This is the time at which you should check the temperature as described above.

In case the temperature is not alright yet, you can replace the food (bottles / jars / tins) to the

container. After some time, the appliance will resume heating (thermostat indicator lights up).

Meanwhile, the food will be heated further. Before feeding, check the temperature of the food.

Cleaning and maintenance

1. Before cleaning the appliance, unplug it from the mains, tip out any remaining water

and allow the appliance to cool down.

2. Do not immerse in water.

3. Do not use scouring agent for cleaning.

4. Just wipe the appliance with a damp cloth.

5 Disposal

In order to dispose of your device, take it to a collection point provided by

your local public waste authorities (e.g. recycling centre). According to laws

on the disposal of electronic and electrical devices, owners are obliged to

dispose of old electronic and electrical devices in a separate waste con-

tainer. The symbol indicates that the device must not be disposed of in nor-

mal domestic waste!

Risks to health and the environment from batteries!

Never open, damage or swallow batteries or allow them to pollute the envi-

ronment. They could contain toxic and ecologically harmful heavy metals.

You are legally obliged to dispose of batteries at the point−of−sale or autho-

rised collection points where the corresponding containers are provided.

Disposal is free of charge. The above symbols indicate that the batteries

must not be disposed of in domestic waste and that they must be disposed

of at an authorised collection point.

Packaging materials must be disposed of according to local regulations.

23

6 Guarantee

SWITEL equipment is produced and tested according to the latest production methods.

Carefully selected materials and highly developed technology ensure perfect functioning and

a long service life. The terms of guarantee do not apply to the batteries or power packs used

in the products. The period of guarantee is 24 months from the date of purchase.

All deficiencies related to material or manufacturing errors within the period of guarantee will

be redressed free of charge. Rights to claims under the terms of guarantee are annulled

following tampering by the purchaser or third parties. Damage caused as the result of im-

proper handling or operation, normal wear and tear, incorrect positioning or storage, im-

proper connection or installation or Acts of God and other external influences are excluded

from the terms of guarantee. In the case of complaints, we reserve the right to repair or

replace defect parts or provide a replacement device. Replaced parts or devices become

our property. Rights to compensation in the case of damage are excluded where there is no

evidence of intent or gross negligence by the manufacturer.

If your device does show signs of a defect within the period of guarantee, please contact the

sales outlet where you purchased the SWITEL device, producing the purchase receipt as

evidence. All claims under the terms of guarantee in accordance with this agreement can

only be asserted at the sales outlet. No claims under the terms of guarantee can be

asserted after a period of two years from the date of purchase and hand−over of the product.

Declaration of Conformity

This device fulfils the requirements stipulated in the EU directive.

To view the complete Declaration of Conformity, please use the download

facility on our web site www.switel.com

free of charge.

Hotline

In the case of technical problems, you can contact our hotline service, tel. 0900 00 1675

within Switzerland (Swisscom fees at time of going to print: CHF 2.60/min).

1

Version 1.0 − 18.08.2010

Declaration of Conformity

Diese Anlage entspricht der europäischen R&TTE Richtlinie.

Für die komplette Konformitätserklärung nutzen Sie bitte den kostenlosen Download von unserer Website

www.switel.com.

Cet équipement est conforme à la directive européenne R&TTE.

Pour obtenir la déclaration de conformité intégrale, veuillez vous servir du téléchargement gratuit de notre

site Internet www.switel.com.

Quest’apparecchiatura è conforme alla direttiva europea R&TTE.

Per la dichiarazione di conformità completa si prega di voler usufruire del servizio gratuito di download dal

nostro sito Internet www.switel.com.

This equipment complies with the European R&TTE directive.

To view the complete Declaration of Conformity, please refer to the free download available at our web

site: www.switel.com.

Service Hotline

Bei technischen Problemen können Sie sich an unsere Service−Hotline unter Tel. 0900 00 1675 innerhalb

der Schweiz (Kosten Swisscom bei Drucklegung: CHF 2.60/min) wenden.

S’il s’agit de problèmes techniques, vous pouvez vous adresser à notre hotline de service en Suisse en

appelant le numéro 0900 00 1675 (frais Swisscom à la date d’impression de ce manuel : CHF 2.60/min).

In caso di problemi tecnici è possibile rivolgersi alla nostra hotline di assistenza tecnica chiamando al

numero 0900 00 1675 valido per la Svizzera

(spese da rete Swisscom alla data di stampa: CHF 2.60 / min).

In the event of technical problems, you can contact our hotline service, Tel. 0900 00 1675 within Switzer-

land (cost via Swisscom at time of going to print: CHF 2.60/min).

SWITEL BF500 Owner's manual

SWITEL BF500 Owner's manual

in other languages

Related papers

Other documents