Kenwood FP260 Series Owner's manual

Head Office Address: Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK

www.kenwoodworld.com

Designed and engineered by Kenwood in the UK

Made in China

19272/3

Page is loading ...

English 2 - 5

Nederlands 6 - 9

Français 10 - 13

Deutsch 14 - 17

Italiano 18 - 21

Português 22 - 25

Español 26 - 29

Dansk 30 - 33

Svenska 34 - 37

Norsk 38 - 41

Suomi 42 - 45

Türkçe 46 - 49

ČČeesskkyy

50 - 53

Magyar 54 - 57

Polski 58 - 61

Pycckий 62 - 66

EÏÏËÓÈÎ¿ 67 - 71

Slovenčina 72 - 76

Українська 77 - 81

´¸∂w

86 - 89

≠U¸ßv

82 - 85

UNFOLD

Page is loading ...

before using your Kenwood appliance

●

Read these instructions carefully and retain for future reference.

●

Remove all packaging and any labels.

safety

●

The blades and discs are very sharp, handle with care. Always

hold the knife blade by the finger grip at the top,

away from the cutting edge, both when handling and

cleaning.

●

Always remove the knife blade before pouring contents from the

bowl.

●

Keep hands and utensils out of the processor bowl and liquidiser

goblet whilst connected to the power supply.

●

Switch off and unplug:-

●●

before fitting or removing parts;

●●

when not in use;

●●

before cleaning.

●

Never use your fingers to push food down the feed tube. Always

use the pusher/s supplied.

●

Before removing the lid from the bowl or liquidiser/mill from the

power unit:-

●●

switch off;

●●

wait until the attachment/blades have completely stopped;

●●

be careful not to unscrew the liquidiser goblet or mill jar from

the blade assembly.

●

Liquids should be allowed to cool to room temperature before

blending.

●

Do not use the lid to operate the processor, always use the on/off

speed control.

●

This machine will be damaged and may cause injury

if the interlock mechanism is subjected to excessive

force.

●

Never use an unauthorised attachment.

●

Never leave the appliance unattended when it is operating.

●

Never use a damaged appliance. Get it checked or repaired: see

‘service & customer care’.

●

Never let the power unit, cord or plug get wet.

●

Don’t let excess cord hang over the edge of a table or worktop

or touch hot surfaces.

●

Do not exceed the maximum capacities stated in the

recommended speed chart.

●

This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a

person responsible for their safety.

●

Children should be supervised to ensure that they do not play

with the appliance.

●

Only use the appliance for its intended domestic use. Kenwood

will not accept any liability if the appliance is subject to improper

use, or failure to comply with these instructions.

●

Misuse of your processor/liquidiser can result in injury.

Refer to the relevant section under “using the attachments” for

additional safety warnings for each individual attachment.

before plugging in

●

Make sure your electricity supply is the same as the one shown

on the underside of your machine.

●

This appliance conforms to EC directive 2004/108/EC on

Electromagnetic Compatibility and EC regulation no. 1935/2004

of 27/10/2004 on materials intended for contact with food.

before using for the first time

1 Remove all packaging including the plastic blade covers from the

knife blade. Take care the blades are very sharp. These

covers should be discarded as they are to protect the blade

during manufacture and transit only.

2Wash the parts see ‘cleaning’

3 Push excess cord into the back of the machine.

key

processor

 pusher

 feed tube

 lid

 bowl

 detachable drive shaft

 speed + pulse control

 power unit

 safety interlock

 cord storage

glass liquidiser

 blade unit

 sealing ring

 goblet

 lid

 filler cap

glass mill

 blade unit

 sealing ring

 jar

attachments

 knife blade

 dough tool

 twin beater geared whisk

thick slicing/coarse shredding disc

thin slicing/fine shredding disc

rasping disc

geared citrus press

spatula

2

to use your food processor

1 Fit the detachable shaft onto the power unit .

2 Then fit the bowl. Place the handle towards the back and turn

clockwise until it locks .

3Fit an attachment over the drive shaft.

●

Always fit the bowl and attachment onto the machine before

adding ingredients.

4 Fit the lid  - ensuring the top of the drive shaft locates into the

centre of the lid.

●

Do not use the lid to operate the processor, always

use the on/off speed control.

5 Switch on and select a speed.

●

The processor won’t work if the bowl and lid are

fitted incorrectly.

●

Use the pulse control for short bursts. The pulse will operate as

long as the control is held in position.

6 Reverse the above procedure to remove the lid, attachments and

bowl.

●

Always switch off before removing the lid.

important

●

Your processor bowl is not suitable for crushing or grinding

coffee beans, or converting granulated sugar to caster sugar.

●

When adding almond essence or flavouring to mixtures avoid

contact with the plastic as this may result in permanent marking.

to use your liquidiser

1 Fit the sealing ring  into the blade unit  - ensuring the seal is

located correctly. Leaking will occur if the seal is

damaged or not fitted correctly.

2 Screw the goblet onto the blade assembly .

The liquidiser will not work if incorrectly assembled.

3 Put your ingredients into the jug.

4 Fit the lid to the goblet and push down to secure . Fit the filler

cap.

5 Place the liquidiser onto the power unit and turn clockwise to

lock .

6 Select a speed or use the pulse control.

safety

●

Liquids should be allowed to cool to room

temperature before blending.

●

Always take care when handling the blade assembly and avoid

touching the cutting edge of the blades when cleaning.

●

Only operate the liquidiser with the lid in place.

●

Only use the goblet with the blade assembly supplied.

●

Never run the liquidiser empty.

●

To ensure the long life of your liquidiser, do not run it for longer

than 60 seconds.

●

Smoothie recipes - never blend frozen ingredients that have

formed a solid mass during freezing, break it up before adding to

the goblet.

hints

●

When making mayonnaise, put all the ingredients, except the oil,

into the liquidiser. Remove the filler cap. Then, with the appliance

running, add the oil slowly through the hole in the lid.

●

Thick mixtures, e.g. pâtés and dips, may need scraping down. If

the mixture is difficult to process, add more liquid.

●

Ice crushing - operate the pulse in short bursts until crushed to the

desired consistency.

●

The processing of spices is not recommended as they may

damage the plastic parts.

●

The appliance will not work if the liquidiser is incorrectly fitted.

●

To blend dry ingredients - cut into pieces, remove the filler cap,

then with the appliance running, drop the pieces down one by

one. Keep your hand over the opening. For best results empty

regularly.

●

Don’t use the liquidiser as a storage container. Keep it empty

before and after use.

●

Never blend more than 1.2 litres - less for frothy liquids like

milkshakes.

to use your mill

Use the mill for milling herbs, nuts and coffee beans.

1 Put the ingredients into the jar .

2Fit the sealing ring  into the blade unit .

3Turn the blade unit upside down. Lower it into the jar, blades

down.

4 Screw the blade unit onto the jar until finger tight .

5Place the mill onto the power unit and turn clockwise to lock .

6 Switch onto maximum speed or use the pulse control.

safety

●

Never fit the blade unit to your food processor without the jar

fitted.

●

Never unscrew the jar while the mill is fitted to your appliance.

●

Do not touch the sharp blades – Keep the blade unit away from

children.

●

Never remove the mill until the blades have completely stopped.

●

To ensure the long life of your mill, never run for longer than

30 seconds. Switch off as soon as you have got the right

consistency.

●

The processing of spices is not recommended as they may

damage the plastic parts.

●

The appliance will not work if the mill is incorrectly fitted.

●

Use for dry ingredients only.

hints

Herbs are best milled when clean and dry.

3

4

recommended speed chart

tool/attachment function speed maximum

capacities

knife blade Cake making 1 – 2 1Kg/2lb 4oz total weight

Rubbing fat into flour 2 250g/9oz flour weight

Adding water to combine pastry ingredients 1 – 2

Chopping & pureeing 2 400g/14oz chopping lean

meat total weight

Thick soup mixes (500mls liquid to 500g dry 1 – 2 1 litre

ingredients)

Thinner soup mixes/milk 1 – 2 600 ml

dough tool Yeasted mixes 2 340g/12oz flour weight

whisk Egg whites 2 4

Cream 1 – 2 250 ml

discs - slicing/shredding Firm food items such as carrots, hard cheeses 2 –

Softer items such as cucumbers, tomatoes 1 –

rasping disc Parmesan cheese, Potato for German 2 –

potato dumplings

citrus press Citrus fruits 1 –

liquidiser All processing 2 1.2 litres

mill Herbs 2 10g

Nuts and Coffee Beans 2 50g

using the attachments

see chart above for speed of each attachment.

 knife blade/ dough tool

The knife blade is the most versatile of all the attachments. The

length of the processing time will determine the texture achieved.

For coarser textures use the pulse control.

Use the knife blade for cake and pastry making, chopping raw and

cooked meat, vegetables, nuts, pate, dips, pureeing soups and to

also make crumbs from biscuits and bread.

Use the dough tool for yeasted mixes.

hints

knife blade

●

Cut food such as meat, bread, vegetables into cubes

approximately 2cm/3/4in before processing.

●

Biscuits should be broken into pieces and added down the feed

tube whilst the machine is running.

●

When making pastry use fat straight from the fridge cut into

2cm/3/4in.cubes.

●

Take care not to over-process.

dough tool

●

Place the dry ingredients in the bowl and add the liquid down the

feed tube whilst the machine is running. Process until a smooth

elastic ball of dough is formed this will take 60 secs.

●

Re-knead by hand only. Re-kneading in the bowl is not

recommended as it may cause the processor to become unstable.

 twin beater geared whisk

Use for light mixtures only eg egg whites, cream, evaporated milk

and for whisking eggs and sugar for fatless sponges. Heavier

mixtures such as fat and flour will damage it.

using the whisk

1 Fit the drive shaft and bowl onto the power unit.

2Push each beater securely into the drive head.

3 Fit the whisk by carefully turning until it drops over the drive shaft.

4 Add the ingredients.

5 Fit the lid - ensuring the end of the shaft locates into the centre of

the lid.

6Switch on.

important

●

The whisk is not suitable for making one-stage cakes

or creaming fat and sugar as these mixes will damage

it. Always use the knife blade for cake making.

hints

●

Best results are obtained when the eggs are at room temperature.

●

Ensure the bowl and whisks are clean and free from grease before

whisking.

slicing/shredding discs

To use the discs.

reversible slicing/shredding discs - thick , thin

Use the shredding side for cheese, carrots, potatoes and foods of

a similar texture.

Use the slicing side for cheese, carrots, potatoes, cabbage,

cucumber, courgette, beetroot and onions.

rasping disc

Grates Parmesan cheese and potatoes for German potato

dumplings.

safety

●

Never remove the lid until the cutting disc has

completely stopped.

●

Handle the cutting discs with care - they are

extremely sharp

to use the cutting discs

1 Fit the drive shaft and bowl onto the power unit.

2 Holding by the centre grip, place the disc onto the drive shaft with

the appropriate side uppermost.

3 Fit the lid.

4 Put the food in the feed tube.

5 Switch on and push down evenly with the pusher - never put

your fingers in the feed tube.

hints

●

Use fresh ingredients

●

Don’t cut food too small. Fill the width of the feed tube fairly full.

This prevents the food from slipping sideways during processing.

●

Food placed upright comes out shorter than food placed

horizontal.

●

There will always be a small amount of waste on the disc or in

the bowl after processing.

citrus press

Use the citrus press to squeeze the juice from citrus fruits (eg

oranges, lemons, limes and grapefruits).

cone

sieve

to use the citrus press

1 Fit the drive shaft and bowl onto the power unit.

2 Fit the sieve into the bowl - ensuring the sieve handle is locked

into position directly over the bowl handle.

3 Place the cone over the drive shaft turning until it drops all the

way down.

4 Cut the fruit in half. Then switch on and press the fruit onto the

cone.

●

The citrus press will not operate if the sieve is not

locked correctly.

care & cleaning

●

Always switch off and unplug before cleaning.

●

Handle the blades and cutting discs with care - they are

extremely sharp.

●

Some foods may discolour the plastic. This is perfectly normal

and won’t harm the plastic or affect the flavour of your food. Rub

with a cloth dipped in vegetable oil to remove the discolouration.

power unit

●

Wipe with a damp cloth, then dry. Ensure that the interlock area

is clear of food debris.

●

Store excess cord in the storage area at the back of the machine

.

liquidiser/mill

1 Empty the goblet/jar before unscrewing it from the blade

assembly.

2Wash the goblet/jar by hand.

3 Remove and wash the sealing ring.

4 Don’t touch the sharp blades – brush them clean using hot

soapy water, then rinse thoroughly under the tap. Don’t

immerse the blade unit in water.

5 Leave to dry upside down.

twin beater geared whisk

●

Detach the beaters from the drive head by gently pulling them

free. Wash in warm soapy water.

●

Wipe the drive head with a damp cloth, then dry. Do not

immerse the drive head in water.

bowl/lid and attachments

●

Wash by hand, then dry.

●

Alternatively they can be washed on the top rack of your

dishwasher. A short low temperature program is recommended.

service and customer care

●

If the cord is damaged it must, for safety reasons, be replaced

by KENWOOD or an authorised KENWOOD repairer.

If you need help with:

●

using your appliance or

●

servicing or repairs

Contact the shop where you bought your appliance.

●

Designed and engineered by Kenwood in the UK.

●

Made in China.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL

OF THE PRODUCT IN ACCORDANCE WITH EC

DIRECTIVE 2002/96/EC.

At the end of its working life, the product must not be disposed of as

urban waste.

It must be taken to a special local authority differentiated waste

collection centre or to a dealer providing this service.

Disposing of a household appliance separately avoids possible

negative consequences for the environment and health deriving

from inappropriate disposal and enables the constituent materials

to be recovered to obtain significant savings in energy and

resources. As a reminder of the need to dispose of household

appliances separately, the product is marked with a crossed-out

wheeled dustbin.

5

Page is loading ...

Kenwood FP260 Series Owner's manual

This manual is also suitable for

Kenwood FP260 Series Owner's manual

in other languages

Related papers

Other documents