4. Page swing: The page swing is divided into two layers: inside and outside. Press the
"Page Swing" button will automatically swing the inside page from left to right. The outer
swing page is manually controlled up and down.
5. Refrigeration function: the refrigeration function can be used on the premise that there
is water in the water tank (it is forbidden to turn on the refrigeration function when there is
no water). Open the refrigeration key, the water pump starts to work, and the water passes
through the circulation system to achieve the refrigeration effect. If the machine is only
used as a fan, or there is no water in the machine, turn off the refrigeration switch.
If the cooling key is not turned off, the water drop sign on the display will flash and the
buzzer will prompt. At this time, it is necessary to turn off the cooling key as soon as
possible.
6.Timing: Under the working state of the cold fan, press this key once to enter the timing
state. At this time, the timing is set as 0.0 hours. The timing can be selected within 0-12
hours. Each time you press it, it will increase by 1 hour. In the state of 12 hours, press the
timing key once to cancel the timing function.
1. Wind speed: select the wind speed, 0 means the fan stops working, 1 means low speed,
2 means medium speed, and 3 means high speed.
2. Page swing: press the "Page swing" button, the inner page will swing left and right
automatically, and the outer page will be manually controlled up and down.
3. Refrigeration function: the refrigeration function can be used on the premise that there
is water in the water tank (it is strictly prohibited to switch the Turn on the refrigeration
