Lexing LX-P09 Operating instructions

Brand
Lexing
Model
LX-P09
Type
Operating instructions
Summary Specifications
The light-control switch can turn on and turn off light automatically
according to ambient light; it is not affected by ambient
temperature and humidity; It is not only convenient but also
practical; it can control the load that works at night.
LX-P09 Light-Control Sensor Instruction
Notice
1.In front of the light-control switch there should be no block affecting it to receive natural light;
2.In front of the light-control switch there should be no swaying object;
3.Avoid installing the unit below light.
Test
1.Use opaque to cover the sense-light window when testing in the daytime.
2.When cover this opaque, the load will be on .
3.When take off this opaque, the load will be off.
4.Take off this opaque after testing.
Connection-wire diagram
Connect blue and brown with power
Connect blue and red with load
Brown
Blue Red
~input output
Light-Control
Switch
Load
www.lexing.com.cn
20mm
43.3mm
35.6mm
35.6mm
78.8mm
40.8mm
Correct installation
Wrong installation
φ3mm
Power Source: 220-240VAC
Power frequently: 50Hz
Rated Current: 6A(pure resistance load)
Light-control: Load on 10LUX
Load off 30LUX
Installation
  • Page 1 1

Lexing LX-P09 Operating instructions

Brand
Lexing
Model
LX-P09
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents