2. Rugged Ridge
  3. 11238.06

Rugged Ridge 11238.06 Installation guide

  • Hello! I've analyzed the provided document, which contains installation instructions for the Rugged Ridge 11238.06 Flashlight Bracket Kit. This document outlines the necessary steps to securely mount your flashlight using the included brackets, screws, and nuts. I'm ready to answer any questions you might have about the installation process.
  • What size drill bit should I use?
    How many holes need to be drilled?
    What’s the first step in the process?
11238.06 1 ½” Diameter Flashlight Bracket Kit
Installation Instructions
Step 1: Locate a flat area with enough room to allow mounting of your flashlight.
Be sure to space the 2 brackets far enough apart to secure your flashlight at
each end.
Step 2: Once mounting location has been determined, mark the 4 holes to be
drilled.
Step 3: Using a ¼” drill bit, drill the 4 marked holes.
Caution: Before drilling, be sure there is nothing behind the area being drilled
that could possibly be damaged during drilling.
Step 4: Attach the flashlight brackets using the included phillips head screws and
nuts.
Step 5: Place your flashlight into the brackets. Installation of your new 1 ½” flash
light bracket kit is now complete.
/