2. REED
  3. 07510

REED 07510 User guide

  • Hello! I am an AI chatbot trained to assist you with the REED 07510 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
REED PNEUMATIC UPC
BEFORE OPERATING OR PERFORMING MAINTENANCE, SEE
OWNER’S MANUAL AND UPC 636-3 SERVICE BULLETIN PROVIDED WITH EACH UNIT
UPC AIR MOTOR
PREVENTIVE MAINTENANCE
NOTE 1
USE THE SPECIFICALLY TAILORED FILTER-
REGULATOR-LUBRICATOR. (REED #97584)
All air motors are sensitive to contamination and
require clean air and proper lubrication. Be cer-
tain the filter is not clogged and the lubricator is
delivering 3 to 6 drops per minute.
NOTE 2
OBSERVE THE LUBRICATION INSTRUCTIONS
Lightly grease gearing after day’s use. Turn the
unit over, rotate the exhaust collar to align the
1/4” hole on the centerline, then access the
grease fitting inside the 1/4” hole.. Also pour a
teaspoon of Non Fluid Oil* air lube in the air inlet
before each new air hookup and after each day’s
use. *Non Fluid Oil Corp. (Reed #97583)
NOTE 3
READ THE COMPLETE OWNER’S MANUAL AND
SERVICE BULLETINS PROVIDED WITH EACH
UNIT BEFORE OPERATING.
BOTTOM VIEW
RIGHT VIEW
Catalog Item Pipe Diameter
Number Code in - nom. O.D. mm
UPC616A 07512 6 - 16 150 - 450
UPC636A 07510 6 - 36 150 - 1000
UPC648A 07511 6 - 48 150 - 1300
GREASE FITTING INSIDE
SEE NOTE 2
ACCESS HOLE
EXHAUST
COLLAR
#50218
AIR INLET
/