Silvercrest 274344 Operating Instructions Manual

IAN 274344

ELECTRIC KNIFE SHARPENER SEMS 12 A1

ELECTRIC KNIFE SHARPENER

Operating instructions

ELEKTRISCHER MESSERSCHÄRFER

Bedienungsanleitung

ELEKTRINIS PEILIŲ GALĄSTUVAS

Naudojimo instrukcija

ELEKTRYCZNA OSTRZAŁKA

DO NOŻY

Instrukcja obsługi

GB / IE Operating instructions Page 1

PL Instrukcja obsługi Strona 15

LT Naudojimo instrukcija Puslapis 29

DE / AT / CH Bedienungsanleitung Seite 43

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of

the device.

Przed przeczytaniem proszę rozłożyć stronę z ilustracjami, a następnie proszę zapoznać się z wszystkimi

funkcjami urządzenia.

Prieš skaitydami atsiverskite lapą su paveikslėliais ir susipažinkite su visomis prietaiso funkcijomis.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen

Funktionen des Gerätes vertraut.

B

A

SEMS 12 A1

GB

│

IE

│

1 ■

Contents

Introduction ...................................................2

Copyright ............................................................... 2

Limitation of liability ....................................................... 2

Intended use ............................................................ 2

Package contents ..............................................3

Disposal of packaging materials ............................................. 3

Description of the appliance .....................................3

Technical data .................................................4

Safety guidelines ..............................................5

Preparation ...................................................7

Sharpen knives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Double-sided smooth grind ................................................. 8

Single-sided smooth grind ................................................. 10

Cleaning .....................................................12

Storage .....................................................13

Disposal .....................................................13

Warranty and service ..........................................14

Importer .....................................................14

SEMS 12 A1

■ 2

│

GB

│

IE

Introduction

Congratulations on the purchase of your new appliance!

You have decided in favour of a modern, high-quality product. These operating

instructions are part of this product. They contain important information on safety,

usage and disposal. Before using the product, familiarise yourself with all handling

and safety guidelines. This appliance may only be used as described and for the

purposes indicated. Please also pass these operating instructions on to any future

owner(s).

Copyright

This documentation is protected by copyright.

Any reproduction, or any reprint even in the form of excerpts, as well as the ren-

dition of ﬁgures even in modiﬁed form, is only permitted with the manufacturer’s

written consent.

Limitation of liability

All the technical information, data and instructions regarding installation, connection

and operation contained in these operating instructions corresponds to the latest

information available to us at the time of printing and takes our previous experience

and know-how into account.

No claims can be derived from the details, illustrations and descriptions in these

instructions.

The manufacturer assumes no responsibility for damage caused by failure to

observe these instructions, improper use, incompetent repairs, unauthorised

modiﬁcations or for the use of non-approved replacement parts.

Intended use

This appliance is exclusively intended for the sharpening of knives (made of

metal or ceramics) that are used in private households.

This appliance is intended solely for use in private households. Not for commer-

cial use!

SEMS 12 A1

GB

│

IE

│

3 ■

Package contents

The appliance is supplied with the following components as standard:

▯ Electric Knife Sharpener

▯ Mains adapter

▯ Operating instructions

1) Remove all parts of the appliance and the operating instructions from the box.

2) Remove all packaging materials from the appliance.

NOTE

► Check the package for completeness and for signs of visible damage.

► If the delivery is not complete or has been damaged due to defective

packaging or transportation, contact the Service Hotline (see section

Warranty and Service).

Disposal of packaging materials

The packaging protects the appliance from damage during carriage.

The packaging materials have been selected for their environmental friendliness

and ease of disposal, and are therefore recyclable.

Returning the packaging to the material cycle conserves raw materials and

reduces the amount of waste which is generated. Dispose of packaging materials

that are no longer needed in accordance with applicable local regulations.

NOTE

► If possible, keep the original packaging of the appliance during the warranty

period so that the appliance can be packed properly for return shipment in

the event of a warranty claim.

Description of the appliance

Figure A:

 Grinding openings for rough sharpening (sharpening base 1)

 Grinding openings for ﬁne sharpening (sharpening base 2)

 Socket for mains adapter

 On/Oﬀ switch

Figure B:

 Mains adapter

 Power plug

SEMS 12 A1

■ 4

│

GB

│

IE

Technical data

Appliance

Input voltage 12 V

Power consumption 12 W, (1.0 A)

Sharpening speed 3200 rotations/minute

CO time 2 minutes

The CO time (continuous operation time) is the amount of time an appliance can

be operated without the motor overheating and becoming damaged. When

the speciﬁed CO time has been reached, the appliance must be switched oﬀ

until the motor has cooled down to room temperature (approx. 20 minutes).

Mains adapter (LY012SPS-120108VH)

Manufacturer Iyangel

Input voltage 100 - 240 V ∼, 50 - 60 Hz

Current consumption 0.4 A

Output voltage 12 V

Output current 1.08 A

Protection class

II

SEMS 12 A1

GB

│

IE

│

5 ■

Safety guidelines

RISK OF ELECTRIC SHOCK

► Protect the product from moisture. Only use it in dry rooms;

do not use outdoors or in moist environments.

► Ensure that the power cable cannot be damaged during

use, in particular not from sharp blades.

► To prevent accidents, have defective plugs and/or power

cables replaced immediately by an authorised specialist

technician or our Customer Service department.

► Never open any housing parts.

NEVER submerse the appliance in water or other liquids!

Otherwise there is a risk of an electric shock.

► After use or during absences, always remove the plug from

the mains power socket. Mains voltage is on the product for

as long as the mains plug is in the socket.

► Ensure that the plug can be reached at all times in order to

be able to pull it out of the socket in case of danger.

► The appliance may only be used with the original power

supply.

Use the mains adapter / the appliance only indoors.

SEMS 12 A1

■ 6

│

GB

│

IE

WARNING! RISK OF INJURY!

► Check to ensure that the appliance is in a serviceable con-

dition before use. If there are visible damages, you may

not continue the use of the appliance. In that case, contact

customer service ﬁrst to check the appliance for safety.

► Ensure that no hair, loose clothing or body parts come into

contact with the rotating grinding stone.

► Wear protective gloves to avoid injury from sharp blades.

► This appliance should not be used by children.

► The appliance should always be disconnected from the

mains when unattended and before assembly, disassembly

or cleaning.

► The appliance and its connecting cable must be kept away

from children.

► Children must not use the appliance as a plaything.

► This appliance may be used by persons with limited physi-

cal, sensory or mental capabilities or lack of experience

and knowledge, provided that they are under supervision

or have been told how to use the appliance safely and are

aware of the potential risks.

► Use the appliance only if the covers are ﬁtted properly on

the grinding stones.

CAUTION – PROPERTY DAMAGE!

► Do not use this appliance for wet sharpening.

► Do not use this appliance for sharpening knives with serrated

edges or toothed blades. Sharpening would grind out the

serrated edges or the teeth and make the knife unusable.

SEMS 12 A1

GB

│

IE

│

7 ■

Preparation

1) Connect the plug  of the mains adapter  with the socket  on the

appliance.

2) Place the appliance on a suitable and level surface.

3) Connect the mains adapter  into a power socket.

4) Switch on the appliance using the On/Oﬀ switch .

NOTE

► The knives you would like to sharpen must be free from dirt and food

residues!

Sharpen knives

CAUTION – PROPERTY DAMAGE!

► Never exceed the maximum operating time of 2 minutes. Let the appliance

cool down for about 20 minutes after 2 minutes of operation, before using

it again.

► Do not exert any ﬁrm pressure with the blade on the grinding stone – this

damages the blade and does not accelerate the sharpening process.

► To sharpen knives with ceramic blades, use only sharpening base 2 .

SEMS 12 A1

■ 8

│

GB

│

IE

Double-sided smooth grind

For a double-sided grind, the blade of the knife is sharpened from both sides

toward the cutting edge. Smooth grind is characterised by the knife’s smooth

blade, meaning no waves or notches are ground in it.

NOTES ON THE HANDLING OF THE APPLIANCE

► Prevent that the blade cuts into the plastic housing of the appliance when it

is pulled through.

Accidental cuts into the housing, however, do not compromise the functioning

of the appliance.

► To sharpen knives with ceramic blades, use only sharpening base 2 .

For this purpose, follow the instructions starting from step 3).

► Use the two slits of sharpening base 1  only for very dull knives. For this

purpose, follow the instructions starting from step 1).

1) Always hold the appliance with your left hand.

2) Hold the knife at the handle and pull the blade in a steady movement once

through the left and once through the right slit of sharpening base 1 .

Exert slight pressure when sharpening in the direction of the sharpening

stone to ensure even contact with the knife.

NOTE

► Very dull knives might have to be pulled through more than once.

SEMS 12 A1

GB

│

IE

│

9 ■

NOTE

► Use both slits of sharpening bases / equally frequently to achieve

even sharpening.

3) Hold the knife at the handle and now pull the blade in a steady movement

through the left and through the right slit of sharpening base 2  in alternation.

If necessary, pull the blade multiple times through both slits of sharpening

base 2 .

Normally, it is suﬃcient to pull the blade 2 times slowly (approx. 4 - 6 seconds)

and 2 times quickly (approx. 1 - 2 seconds) through both slits of sharpening

base 2 :

NOTE

► Very dull knives might have to be pulled through more than once.

4) If you believe that the blade has reached the desired sharpness, test it on

a piece of cutting matter.

Be sure to clean the blade again before you might possibly re-sharpen it.

5) To re-sharpen the blade, pull it once more through the slits of sharpening

base 2  in alternation, until the desired sharpness is reached.

6) If you are satisﬁed with the result, turn the appliance oﬀ on the On/Oﬀ

switch .

7) Clean the blade thoroughly before you use the knife again, in order to

remove potential grinding residues such as metal dust or chips.

SEMS 12 A1

■ 10

│

GB

│

IE

Single-sided smooth grind

For a single-sided grind, one side of the blade runs perfectly straight toward the

cutting edge and the other side is angled up to the cutting edge of the knife. The

angled side is the sharpened side. The single-sided grind can either be smooth

or have small teeth as found on table knives. However, you should only sharpen

blades using a smooth grind with this appliance.

NOTICES ON HANDLING THE APPLIANCE

► Prevent the blade from cutting into the plastic housing of the appliance

when it is pulled through.

Accidental cuts into the housing do not compromise the function of the

appliance.

► Use the sharpening base 1  only for very dull knives. For this purpose,

follow the instructions starting from step 1).

► If knives have a one-sided grind, sharpen only the side of the blade with

the grind. Use either only the right or only the left slit in sharpening base 1

/2  – depending on which side the knife's blade is ground

.

►

To sharpen knives with ceramic blades, use only sharpening base 2 .

1) Always hold the appliance with your left hand.

2) Hold the knife by the handle and pull the blade in a steady movement

once through the left-hand or once through the right-hand slit in sharpening

base1 .

Depending on which side of the blade is ground, exert slight pressure when

sharpening in the direction of the sharpening stone to ensure even contact

with the knife.

NOTE

► Very dull knives might have to be pulled through more than once.

SEMS 12 A1

GB

│

IE

│

11 ■

or

3) Hold the knife at the handle and pull the blade in a steady movement

through the left-hand or through the right-hand slit in sharpening base 2 .

Depending on which side of the blade is ground, pull the blade multiple

times through the slit in sharpening base 2  if necessary.

Normally, it is suﬃcient to pull the blade twice slowly (approx. 4 - 6 seconds)

and twice quickly (approx. 1 - 2 seconds) through both slits of sharpening

base 2 :

or

SEMS 12 A1

■ 12

│

GB

│

IE

NOTE

► Very dull knives might have to be pulled through more than once.

4) If you believe that the blade has reached the desired sharpness, test it on a

piece of cutting matter.

Be sure to clean the blade again before you re-sharpen it if necessary.

5) To re-sharpen the blade, pull it once more through the slit of sharpening base

2 , until the desired sharpness is reached.

6) Once you are satisﬁed with the result, turn the appliance oﬀ using the On/

Oﬀ switch .

7) Before using the knife, clean the blade thoroughly in order to remove poten-

tial grinding residues such as metal dust or chips.

Cleaning

RISK OF ELECTRIC SHOCK

► First, pull out the mains adapter  from the socket and pull out plug 

from socket , before you clean the appliance.

NEVER submerse the appliance in water or other liquids!

Otherwise there is a risk of an electric shock.

CAUTION – PROPERTY DAMAGE!

► Do not use aggressive or abrasive cleaning agents. These can damage the

surfaces of the appliance.

■ Clean the housing using only a dry or lightly moistened cloth. For stubborn

soiling use a mild detergent on the cloth.

■ Wipe oﬀ the mains adapter  with a damp cloth. Ensure that the appliance

and the mains adapter  are completely dry before using the appliance

again.

SEMS 12 A1

GB

│

IE

│

13 ■

■ In case of frequent use, grinding dust and metal residues might settle on the

grinding stones on the inside.

Clean the grinding stones as follows:

– Hold one ﬁnger against the wide end of the black protective caps of

sharpening bases / and press down against the short end at

the same time. Lift oﬀ the protective caps of sharpening bases /

simultaneously.

– Clean the now visible grinding stones using a brush or similar.

– Fit the two black protective caps / back on. Ensure that you do not

confuse the protective caps.

Storage

■ Clean the appliance as described in the section “Cleaning”.

■ Remove the mains adapter  from the appliance.

■ Store the appliance and the mains adapter  in a clean and dry location.

Disposal

Never dispose of the appliance in normal domestic waste.

This product is subject to the provisions of European Directive

2012/19/EU (Waste Electrical and Electronic Equipment).

Dispose of the appliance via an approved waste disposal company or your

municipal waste disposal facility. Please observe applicable regulations.

Please contact your waste disposal facility if you are in any doubt.

Do not dispose of the mains adapter in your normal domestic

waste. This product is subject to the provisions of European

Directive 2012/19/EU (Waste Electrical and Electronic Equipment).

Dispose of the mains adapter through an approved disposal centre or at your

community waste facility. Please comply with all applicable regulations. Please

contact your waste disposal facility if you are in any doubt.

SEMS 12 A1

■ 14

│

GB

│

IE

Warranty and service

The warranty for this appliance is for 3 years from the date of purchase.

The appliance has been manufactured with care and meticulously examined

before delivery.

Please retain your receipt as proof of purchase. In the case of a warranty claim,

please make contact by telephone with our Customer Service Department.

Only in this way can a post-free despatch for your goods be assured.

NOTICE

► The warranty covers only claims for material and manufacturing defects,

but not for transport damage, wearing parts or for damage to fragile

components, e.g. buttons or batteries.

This product is for domestic use only and is not intended for commercial use.

The warranty is void in the case of abusive and improper handling, use of force

and internal tampering not carried out by our authorised service branch.

Your statutory rights are not restricted in any way by this warranty. The warranty

period is not extended by repairs made under the warranty. This applies also to

replaced and repaired parts.

Damages and defects extant at the time of purchase must be reported immedi-

ately after unpacking, resp. no later than two days after the date of purchase.

Repairs made after the lapse of the warranty period are subject to charge.

Service Great Britain

Tel.: 0871 5000 720 (£ 0.10/Min.)

E-Mail: k[email protected]

IAN 274344

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (oﬀ peak))

E-Mail: k[email protected]

IAN 274344

Importer

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

PL

│

15 ■

SEMS 12 A1

Spis treści

Wstęp .......................................................16

Prawa autorskie .........................................................16

Ograniczenie odpowiedzialności ........................................... 16

Użytkowanie zgodne z przeznaczeniem .....................................16

Zakres dostawy ..............................................17

Utylizacja opakowania ...................................................17

Opis urządzenia ..............................................17

Dane techniczne ..............................................18

Wskazówki bezpieczeństwa ....................................19

Czynności przygotowawcze ....................................21

Ostrzenie noża ...............................................21

Szlif obustronny gładki. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Szlif jednostronny gładki .................................................. 24

Czyszczenie ..................................................26

Przechowywanie .............................................27

Utylizacja ....................................................27

Gwarancja i serwis ............................................28

Importer .....................................................28

■ 16

│

PL

SEMS 12 A1

Wstęp

Gratulujemy zakupu nowego urządzenia!

Jest to nowoczesny i wartościowy produkt. Instrukcja obsługi stanowi element

składowy produktu. Zawiera ona ważne informacje na temat bezpieczeństwa,

użytkowania i utylizacji. Przed rozpoczęciem użytkowania produktu należy

zapoznać się ze wszystkimi informacjami dotyczącymi obsługi i bezpieczeństwa.

Produkt należy użytkować wyłącznie zgodnie z zamieszczonym tu opisem oraz

w podanym zakresie zastosowań. W przypadku przekazania urządzenia osobie

trzeciej należy dołączyć również całą dokumentację.

Prawa autorskie

Niniejsza dokumentacja jest chroniona prawem autorskim.

Wszelkie rozpowszechnianie, wzgl. każdy przedruk, także we fragmentach,

jak również odtwarzanie ilustracji, także w zmienionym stanie, jest dozwolone

wyłącznie po uzyskaniu pisemnej zgody producenta.

Ograniczenie odpowiedzialności

Wszystkie zawarte w niniejszej instrukcji obsługi informacje techniczne, dane,

wskazówki montażu i podłączania oraz obsługi, są aktualne na dzień prze-

kazania do druku i uwzględniają nasze dotychczasowe doświadczenie oraz

spostrzeżenia zgodnie z najlepszą wiedzą.

Zawarte tu informacje, ilustracje i opisy nie mogą stanowić podstawy do roszczeń.

Producent nie ponosi żadnej odpowiedzialności za szkody spowodowane wsku-

tek nieprzestrzegania instrukcji, użytkowania urządzenia w sposób niezgodny

z jego przeznaczeniem, niefachowych napraw, niedozwolonych przeróbek lub

użycia niedozwolonych części zamiennych.

Użytkowanie zgodne z przeznaczeniem

To urządzenie jest przeznaczone wyłącznie do ostrzenia noży (metalowych lub

ceramicznych) i służy tylko do użytku domowego.

Urządzenie przeznaczone jest wyłącznie do stosowania w gospodarstwie

domowym. Nie używaj urządzenia do celów komercyjnych!

PL

│

17 ■

SEMS 12 A1

Zakres dostawy

Urządzenie dostarczane jest standardowo z następującymi elementami:

▯ Elektryczna ostrzałka do noży

▯ Zasilacz sieciowy

▯ Instrukcja obsługi

1) Wyjmij z kartonu wszystkie elementy urządzenia oraz instrukcję obsługi.

2) Usuń z urządzenia całe opakowanie.

WSKAZÓWKA

► Po rozpakowaniu nowego urządzenia sprawdź, czy w środku znajdują się

wszystkie części i czy nie ma żadnych widocznych uszkodzeń.

► W przypadku niekompletnej dostawy lub wystąpienia uszkodzeń na skutek

wadliwego opakowania, lub podczas transportu należy skontaktować się

z infolinią serwisową (patrz rozdział Gwarancja i serwis).

Utylizacja opakowania

Opakowanie chroni urządzenie przed uszkodzeniami podczas transportu.

Materiały opakowaniowe są przyjazne dla środowiska i można poddać je

procesowi recyklingu.

Przekazanie opakowania do ponownego przetworzenia pozwoli oszczędzić

surowce naturalne i zmniejszyć zanieczyszczenie środowiska.

Zbędne opakowania utylizować zgodnie z lokalnymi przepisami.

WSKAZÓWKA

► W miarę możliwości zachowaj oryginalne opakowanie na czas trwania

gwarancji. Umożliwi to prawidłowe zapakowanie urządzenia do wysyłki.

Opis urządzenia

Rysunek A:

 Szczeliny do ostrzenia zgrubnego (zespół ostrzący 1)

 Szczeliny do ostrzenia wykańczającego (zespół ostrzący 2)

 Gniazdo zasilacza

 Włącznik/wyłącznik

Rysunek B:

 Zasilacz sieciowy

 Wtyk

Page is loading ...

Silvercrest 274344 Operating Instructions Manual

This manual is also suitable for

Silvercrest 274344 Operating Instructions Manual

in other languages

Related papers

Other documents