VTech CS5121 Quick start guide
- Category
- Telephones
- Type
- Quick start guide
This manual is also suitable for
VTech VT-CS5121
The VTech VT-CS5121 is a versatile and user-friendly cordless telephone system that offers a range of features to enhance your communication experience.
Key Capabilities:
- Answering System: Never miss a call with the built-in answering system. It greets callers with a customizable message and allows you to record and listen to messages remotely.
- Multiple Handsets: Expand your communication range with the ability to add up to four additional handsets to the base unit. This makes it easy to stay connected in different rooms of your home or office.
- Caller ID and Call Waiting: Know who's calling before you answer and easily manage multiple incoming calls with the caller ID and call waiting features.
VTech VT-CS5121
The VTech VT-CS5121 is a versatile and user-friendly cordless telephone system that offers a range of features to enhance your communication experience.
Key Capabilities:
- Answering System: Never miss a call with the built-in answering system. It greets callers with a customizable message and allows you to record and listen to messages remotely.
- Multiple Handsets: Expand your communication range with the ability to add up to four additional handsets to the base unit. This makes it easy to stay connected in different rooms of your home or office.
- Caller ID and Call Waiting: Know who's calling before you answer and easily manage multiple incoming calls with the caller ID and call waiting features.
Quick start guide
for models CS5121/CS5121-2/
CS5121-3/CS5121-4
Install the telephone base and
chargers
Install the telephone base as shown below.
Batte r y installation and
charging
Install the battery as shown below. The battery
may have enough charge for short calls. For
optimal performance, charge the handset
battery for at least 16 hours before use.
Insert the plug
as indicated.
Make sure it is
plugged securely
and matches the
color-coded label
inside the battery
compartment.
1.
Place the battery
with the label
THIS SIDE UP
facing up and
the wires inside
the battery
compartment.
2.
Align the cover
at against
the battery
compartment,
then slide it
upwards until it
clicks into place.
3. Charge the
handset by
placing it in the
telephone base.
The handset
charge light on
the handset
will be on when
charging.
4.
NOTES:
Use only the power adapter(s) and
battery(ies) supplied with your VTech
telephone.
For complete feature instructions,
please refer to your user’s manual.
1.
2.
Outgoing announcement
The outgoing announcement is the greeting
callers hear when calls are answered by the
answering system.
The telephone is preset with a greeting that
answers calls with “Hello, please leave a
message after the tone.” You can use this
preset announcement, or replace it with
your own.
To record your own announcement:
Press ANNC while in idle mode and the
system will announce “Announcement.
Press PLAY or press RECORD.”
Pr es s R EC O R D and the sys te m
announces, “Record after the tone. Press
STOP when you are done.”
After the tone, speak toward s the
microphone at the bottom front of the
telephone base from about nine inches
away.
Press /PLAY/STOP when nished.
The answering system will automatically
playback the newly recorded announcement
and there will be a confirmation tone.
Press /PLAY/STOP to stop the playback
at anytime.
You can record your announcement again
by following the steps above.
1.
2.
3.
4.
5.
6.
DC 9V
Telephone base
Telephone
line cord
Electrical outlet
(not controlled
by a wall switch)
Telephone base
power adapter
(large)
Telephone
wall jack
DSL lter (not included)
for DSL users
Charger
Charger
adapter
(small)
CHARGE
OPER
DEF
JKL
P
QRS
W
XY Z
TUV
MNO
TONE
ABC
Make calls
Press /FLASH and then use the dial
pad keys to dial a number.
-OR-
Enter the phone number rst. You can press
to backspace and press CHAN/REMOVE
to erase digits. Press /FLASH to dial.
Answer calls
Press any dial pad keys (except
/VOL-/CID, /VOL+/ and OFF) to
answer an incoming call.
End calls
Press OFF or put the handset back to the
telephone base to end a call.
Ac ti va t e t h e an sw e r i n g
system
The answering system must be turned on to
answer and record messages.
If the answering system is turned on, the
ANS ON/OFF light will be on. Press
ANS ON/OFF to turn the answering system
off or on.
•
•
•
•
IMPORTANT!
If your product is not working properly:
Refer to the Troubleshooting section of
the user’s manual.
Visit our website at www.vtechphones.
com or call 1 (800) 595-9511. In Canada,
go to www.vtechcanada.com or 1 (800)
267-7377.
•
•
96-006563-010-100
issue 0
CHARGE
OPER
D EF
JK L
P
QR S
W
X Y Z
TUV
MNO
TO NE
A BC
-
1
VTech CS5121 Quick start guide
- Category
- Telephones
- Type
- Quick start guide
- This manual is also suitable for
VTech VT-CS5121
The VTech VT-CS5121 is a versatile and user-friendly cordless telephone system that offers a range of features to enhance your communication experience.
Key Capabilities:
- Answering System: Never miss a call with the built-in answering system. It greets callers with a customizable message and allows you to record and listen to messages remotely.
- Multiple Handsets: Expand your communication range with the ability to add up to four additional handsets to the base unit. This makes it easy to stay connected in different rooms of your home or office.
- Caller ID and Call Waiting: Know who's calling before you answer and easily manage multiple incoming calls with the caller ID and call waiting features.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
VTech CS5121-2 User manual
-
-
-
-
-
-
-
-
-