Philips DVP3040 User manual

DVP3040

DVP3042

DVD VIDEO PLAYER

01-43_dvp3040_37_eng2.indd 101-43_dvp3040_37_eng2.indd 1 2006-07-14 3:35:12 PM2006-07-14 3:35:12 PM

2

Return your Product Registration Card or register online at

www.philips.com/usasupport today to get the very most from your purchase.

Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so

don't miss out. Complete and return your Product Registration Card at once, or register online at

www.philips.com/usasupport to ensure:

Visit our World Wide Web Site at http://www.philips.com/usasupport

Congratulations on your purchase,

and welcome to the “family!”

Dear PHILIPS product owner:

Thank you for your confidence in PHILIPS.

You’ve selected one of the best-built, best-

backed products available today.We’ll do

everything in our power to keep you happy

with your purchase for many years to come.

As a member of the PHILIPS “family,” you’re

entitled to protection by one of the most

comprehensive warranties and outstanding

service networks in the industry.What’s

more, your purchase guarantees you’ll

receive all the information and special offers

for which you qualify, plus easy access to

accessories from our convenient home

shopping network.

Most importantly, you can count on our

uncompromising commitment to your total

satisfaction.

All of this is our way of saying welcome -

and thanks for investing in a PHILIPS prod-

uct.

P.S. To get the most from your PHILIPS

purchase, be sure to complete and

return your Product Registration Card

at once, or register online at:

www.philips.com/usasupport

*Proof of Purchase

Returning the enclosed card

guarantees that your date of

purchase will be on file, so no

additional paperwork will be

required from you to obtain war-

ranty service.

*Product Safety

Notification

By registering your product,

you'll receive notification -

directly from the manufacturer

- in the rare case of a product

recall or safety defect.

*Additional Benefits

Registering your product guar-

antees that you'll receive all of

the privileges to which you're

entitled, including special

money-saving offers.

For Customer Use

Enter below the Serial No. which is located

on the rear of the cabinet. Retain this

information for future reference.

Model No. __________________________

Serial No. __________________________

Know these

safetysymbols

This “bolt of lightning” indicates unin-

sulated material within your unit may

cause an electrical shock. For the safety of

everyone in your household, please do not

remove product covering.

The “exclamation point” calls attention

to features for which you should read

the enclosed literature closely to prevent

operating and maintenance problems.

WARNING: To reduce the risk of fire or

electric shock, this apparatus should not be

exposed to rain or moisture and objects

filled with liquids, such as vases, should not

be placed on this apparatus.

CAUTION: To prevent electric shock, match

wide blade of plug to wide slot, fully insert.

ATTENTION: Pour éviter les choc élec-

triques, introduire la lame la plus large de la

fiche dans la borne correspondante de la

prise et pousser jusqu’au fond.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

01-43_dvp3040_37_eng2.indd 201-43_dvp3040_37_eng2.indd 2 2006-07-14 3:35:21 PM2006-07-14 3:35:21 PM

English

3

Class II equipment symbol

This symbol indicates that the unit has

a double insulation system

01-43_dvp3040_37_eng2.indd 301-43_dvp3040_37_eng2.indd 3 2006-07-14 3:35:22 PM2006-07-14 3:35:22 PM

English

4

WARNING

To reduce the risk of  re or electric shock,

do not expose this equipment to rain or

moisture.

Use of controls or adjustments or

performance of procedures other than

herein may result in hazardous radiation

exposure.

The set complies with the FCC-Rules, Part

15 and with 21 CFR 1040.10.

Canada

English:

This digital apparatus does not exceed

the Class B limits for radio noise

emissions from digital apparatus as set

out in the Radio Interference Regulations

of the Canadian Department of

Communications.

Français:

Cet appareil numérique n’emet pas de

bruits radioélectriques dépassant les

limites applicables aux appareils

numériques de Class B prescrites dans le

Règlement sur le Brouillage

Radioélectrique édicté par le Ministère

des Communications du Canada.

ATTENTION

L’utilisation des commandes ou

réglages ou le non-respect des

procédures ci-incluses peuvent se

traduire par une exposition

dangereuse à l’irradiation.

ATENCIÓN

El uso de mando o ajustes o la

ejecucción de métodos que no sean

los aquí descritos puede ocasionar

peligro de exposición a radiación.

01-43_dvp3040_37_eng2.indd 401-43_dvp3040_37_eng2.indd 4 2006-07-14 3:35:22 PM2006-07-14 3:35:22 PM

EnglishFrançaisEspañol

Index

English ------------------------------------------6

Español --------------------------------------- 82

Français -------------------------------------- 44

This product incorporates copyright protection

technology that is protected by method claims of

certain U.S. patents and other intellectual property

rights owned by Microvision Corporation and other

rights owners. Us eof this copyright protection

technology must be authorized by Macrovision

Corporation, and is intended for home and other

limited viewing uses only unless otherwise

authorized by Macrovision Corporation. Reverse

engineering or disassembly is prohibited.

01-43_dvp3040_37_eng2.indd 501-43_dvp3040_37_eng2.indd 5 2006-07-14 3:35:23 PM2006-07-14 3:35:23 PM

English

6

LASER

Type Semiconductor laser

InGaAlP (DVD)

AIGaAs (CD)

Wave length 658 nm (DVD)

790 nm (CD)

Output Power 7.0 mW (DVD)

10.0 mW (VCD/CD)

Beam divergence 60 degrees

General Information

Environmental Information

All unnecessary packaging has been

omitted. The packaging has been made

easy to separate into three materials;

cardboard (box), polystyrene foam

(buffer) and polyethylene (bags,

protective foam sheet).

Your DVD player consists of materials

which can be recycled and reused if

disassembled by a specialised company.

Please observe the local regulations

regarding the disposal of packaging

materials, exhausted batteries and old

equipment.

Laser Safety

This unit employs a laser. Due to possible

eye injury, only a quali ed service person

should remove the cover or attempt to

service this device.

NOTE:

Pictures shown maybe different

between countries.

CAUTION:

WARNING LOCATION: ON THE

BACKPLATE OF THE SET

NEVER MAKE OR CHANGE

CONNECTIONS WITH THE

POWER SWITCHED ON.

For Customer Use:

Read carefully the information located at

the bottom or rear of your DVD Video

player and enter below the Serial No.

Retain this information for future

reference.

Model No. DVP 3040 & DVP 3042

Serial No. ___________________

Speci cations are subject to change without

notice. Trademarks are the property of

Koninklijke Philips Electronics N.V. or their

respective owners.

Windows Media and the Windows logo

are trademarks, or registered

trademarks of Microsoft Corporation

in the United States and/or other

countries.

Manufactured under license from

Dolby Laboratories, “Dolby”

and the double-D symbol are

trademarks of Dolby Laboratories.

logo.indd 1 2006-03-21 10:25:36 AM

DivX Certied products: “DivX” and

associated logos are trademarks of

DivX, Inc. and are used under license.

01-43_dvp3040_37_eng2.indd 601-43_dvp3040_37_eng2.indd 6 2006-07-14 3:35:23 PM2006-07-14 3:35:23 PM

English

7

Language Code

01-43_dvp3040_37_eng2.indd 701-43_dvp3040_37_eng2.indd 7 2006-07-14 3:35:23 PM2006-07-14 3:35:23 PM

English

8

Contents

Care and Safety Information

Setup .......................................................................................................................................................... 10

Cleaning discs .......................................................................................................................................... 10

General Information

Accessories supplied ..............................................................................................................................11

Region codes .............................................................................................................................................11

Connections

Connecting to television .......................................................................................... 12-13

Using Composite Video sockets (CVBS) ......................................................................................... 12

Using Component Video sockets (YPbPr) ...................................................................................... 12

Using an accessory RF modulator ..................................................................................................... 13

Connecting the power cord ...........................................................................................13

Optional connections

Connecting to an stereo system ...................................................................................14

Stereo system has Dolby Pro Logic or Right/Left Audio In sockets ........................................ 14

Connecting to a digital AV receiver .............................................................................14

Receiver has a PCM, Dolby Digital or MPEG decoder ................................................................ 14

Product Overview

Front and Rear panels ................................................................................................... 15

Remote Control ..............................................................................................................16

Getting Started

Step 1: Inserting Baterries ............................................................................................17

Using the remote control to operate the system ..........................................................................17

Step 2: Finding your viewing channel ...........................................................................17

Step 3: Setting up Progressive Scan feature .............................................................. 18

Step 4: Selecting the matching color system .............................................................19

Step 5: Setting the language ........................................................................................ 20

On-screen display (OSD) language ....................................................................................................20

Audio, Subtitle and DVD menu languages ....................................................................................... 20

Playback from Disc

Playable discs .................................................................................................................. 21

Supported formats ................................................................................................................................. 21

Playback Features

Starting disc playback ................................................................................................... 22

Basic playback control .................................................................................................. 22

Pausing playback...................................................................................................................................... 22

Selecting title/chapter/track ................................................................................................................ 22

Stopping playback ...................................................................................................................................22

Operations for video playback (DVD/VCD/SVCD)................................................... 23

Using the Disc Menu ............................................................................................................................. 23

Zooming in ............................................................................................................................................... 23

Resuming playback from the last stopped point ............................................................................ 23

Slow Motion ............................................................................................................................................. 23

Forward / Reverse Searching .............................................................................................................. 23

Selecting various repeat / shuf e functions ........................................................ 24

Repeat play mode ................................................................................................................................... 24

Repeating a section within a chapter/track .....................................................................................24

01-43_dvp3040_37_eng2.indd 801-43_dvp3040_37_eng2.indd 8 2006-07-14 3:35:24 PM2006-07-14 3:35:24 PM

English

9

Contents

Viewing the disc playback information ............................................................... 25

Title/Chapter/Track selection ............................................................................................................ 25

Time Search ............................................................................................................................................. 25

Angle .......................................................................................................................................................... 25

Special DVD Features ................................................................................................... 26

Playing a Title ........................................................................................................................................... 26

Changing the Audio Language ............................................................................................................. 26

Subtitle ...................................................................................................................................................... 26

Special VCD and SVCD Feature .................................................................................. 26

Playback Control (PBC)........................................................................................................................ 26

Playing a DivX disc ......................................................................................................... 27

Playing MP3/WMA/JPEG/Kodak Picture CD ........................................................ 27-28

General Operation ................................................................................................................................ 27

Playback selection .................................................................................................................................. 28

Zoom picture (JPEG) ............................................................................................................................ 28

Playback with multi-angles (JPEG) ..................................................................................................... 28

DVD Menu Options

Using the Language setup menu ................................................................................. 29

OSD Language ......................................................................................................................................... 29

Subtitle / Audio / DVD Menu .............................................................................................................. 29

Setting DivX Subtitle font .................................................................................................................... 29

Using the Video setup menu ...................................................................................30-32

Aspect Ratio ............................................................................................................................................ 30

View Mode ............................................................................................................................................... 31

TV System ................................................................................................................................................ 31

Video Out ................................................................................................................................................. 31

Smart Picture ........................................................................................................................................... 32

Using the Audio setup menu ...................................................................................33-34

Digital Output ......................................................................................................................................... 33

Night Mode .............................................................................................................................................. 34

Down Sampling ....................................................................................................................................... 34

Using the Rating setup menu ..................................................................................35-36

Rating level settings .........................................................................................................................35-36

Changing the Password ......................................................................................................................... 36

Using the Misc (Miscellaneous) setup menu .........................................................37-38

Restoring the original settings ............................................................................................................ 37

DivX Registration Code ....................................................................................................................... 38

Others

Speci cations ................................................................................................................. 39

Troubleshooting .......................................................................................................40 ~41

Glossary........................................................................................................................... 42

Limited Warranty .......................................................................................................... 43

01-43_dvp3040_37_eng2.indd 901-43_dvp3040_37_eng2.indd 9 2006-07-14 3:35:25 PM2006-07-14 3:35:25 PM

English

10

Care and Safety Information

DANGER!

High voltage! Do not open

the device. You run the risk of

getting an electric shock.

The machine does not contain any

user-serviceable parts. Please leave

all maintenance work to quali ed

personnel.

Setup

Finding a suitable location

– Place the set on a  at, hard and stable

surface. Do not place the set on a

carpet.

– Do not position the set on top of

other equipment that might heat it up

(such as receiver or ampli er).

– Do not put anything under the set

(such as CDs, magazines).

– Install this unit near the AC outlet and

where the AC power plug can be

reached easily.

Space for ventilation

– Place the apparatus in a location with

adequate ventilation to prevent

internal heat build up. Allow at least

10 cm (4.0”) clearance from the rear

and the top of the set and 5cm (2.0”)

from the left and right to prevent

overheating.

10cm (4.0")

5cm (2.0")

Avoid high temperatures, moisture,

water and dust

– Apparatus shall not be exposed to

dripping or splashing.

– Do not place any sources of danger

on the apparatus (such as liquid  lled

objects, lighted candles).

Cleaning discs

Some problems occur because the disc

inside the recorder is dirty (frozen

picture, sound disruptions, picture

distortions). To avoid these problems,

discs should be cleaned on a regular

basis.

To clean a disc, use a micro  bre cleaning

cloth and wipe the disc from the center

to the edge in a straight line.

CAUTION!

Do not use solvents such as benzene,

thinner, commercially available cleaners,

or anti-static sprays intended for analog

discs. Since the optical unit (laser) of the

DVD player operates at a higher power

than regular DVD or CD players,

cleaning CDs intended for DVD or CD

players may damage the optical unit

(laser). Therefore, refrain from using a

cleaning CD.

01-43_dvp3040_37_eng2.indd 1001-43_dvp3040_37_eng2.indd 10 2006-07-14 3:35:25 PM2006-07-14 3:35:25 PM

English

11

General Information

Accessories supplied

ALL

4

Region

U.S.A. and

Canada regions

U.K and

Europe regions

Asia Paci c,

Taiwan, Korea

Australia,

New Zealand,

Latin America

Russia and

India regions

China, Calcos Islands,

Walls and Futuna

Islands

ALL

5

6

Discs that can

be played

ALL

1

ALL

2

3

Remote

control and

two AAA

batteries

Region codes

This DVD player is designed to support

the Region Management System. Check

the regional code number on the disc

package. If the number does not match

the player’s region number (see table

below), the player may be unable to

playback the disc.

Tips:

– It may not be possible to play CD-R/RW

or DVD-R/RW in all cases due to the type of

disc or condition of the recording.

– If you are having trouble playing a certain

disc, remove the disc and try a different one.

Improper formatted disc will not played on

the DVD player.

Composite

video cable

(yellow)

Audio cable

(white, red)

SUBTITLE

ZOOM

AUDIO

REPEAT

REPEAT A-B

STOP

PLAY/PAUSE

MUTE

SETUP

TITLE

RETURN

MENU

DISC

DISPLAY

01-43_dvp3040_37_eng2.indd 1101-43_dvp3040_37_eng2.indd 11 2006-07-14 3:35:25 PM2006-07-14 3:35:25 PM

English

12

IMPORTANT!

– The progressive scan video quality

is only possible when using YPbPr

and a progressive scan television is

required.

Using Component Video sockets

(YPbPr)

A

Use the component video cables (red/

blue/green) to connect the DVD player’s

YPbPr sockets to the component video

input sockets (or labeled as YPbPr) on

the television (cable not supplied).

B To hear sound of this DVD player

through your TV, use the audio cables

(white/red) to connect AUDIO OUT (L/

R) sockets of the DVD player to the

corresponding AUDIO IN sockets on the

television (cable supplied).

C Proceed to page 18 for detailed

progressive scan setup.

Connections

TIPS: Before making or changing any connections, make sure that all the devices are disconnected

from the power outlet.

Connecting to television

IMPORTANT!

– You only need to make one video

connection from the following

options, depending on the

capabilities of your television.

– Connect the DVD player directly

to the television.

Using Composite Video sockets

(CVBS)

A

Use the composite video cable (yellow)

to connect the DVD player’s CVBS

(VIDEO) socket to the video input jack

(or labeled as A/V In, Video In,

Composite or Baseband) on the

television (cable supplied).

B To hear sound of this DVD player

through your TV, use the audio cables

(white/red) to connect AUDIO OUT (L/

R) sockets of the DVD player to the

corresponding AUDIO IN sockets on the

television (cable supplied).

AUDIO OUT

DIGITAL

OUT

VIDEO OUT

COAXIAL

AUDIO

IN

V (Pr/Cr)

U (Pb/Cb)

Y

S-VIDEO

IN

VIDEO IN

COMPONENT

VIDEO IN

AUDIO

OUT

V (Pr/Cr)

U (Pb/Cb)

Y

S-VIDEO

IN

VIDEO IN

COMPONENT

VIDEO IN

2

1

AUDIO OUT

DIGITAL

OUT

VIDEO OUT

COAXIAL

AUDIO

IN

V (Pr/Cr)

U (Pb/Cb)

Y

S-VIDEO

IN

VIDEO IN

COMPONENT

VIDEO IN

AUDIO

OUT

V (Pr/Cr)

U (Pb/Cb)

Y

S-VIDEO

IN

VIDEO IN

COMPONENT

VIDEO IN

2

1

01-43_dvp3040_37_eng2.indd 1201-43_dvp3040_37_eng2.indd 12 2006-07-14 3:35:26 PM2006-07-14 3:35:26 PM

English

13

Connections (continued)

TIPS: Before making or changing any connections, make sure that all the devices are disconnected

from the power outlet.

IMPORTANT!

– If your television only has a single

Antenna In jack (or labeled as 75

ohm or RF In,) you will need an RF

modulator in order to view the

DVD playback on the television. See

your electronics retailer or contact

Philips for details on RF modulator

availability and operations.

Using an accessory RF modulator

A

Use the composite video cable (yellow)

to connect the DVD player’s CVBS jack

to the video input jack on the RF

modulator.

B Use the RF coaxial cable (not supplied) to

connect the RF modulator to your

television’s RF jack.

C To hear sound of this DVD player

through your TV, use the audio cables

(white/red) to connect AUDIO OUT (L/

R) sockets of the DVD player to the

corresponding AUDIO IN sockets on the

RF modulator (cable supplied).

AUDIO OUT

DIGITAL

OUT

VIDEO OUT

COAXIAL

AUDIO IN

R L

VIDEO

IN

TO TVINT IN

CH3 CH4

RF coaxial cable to TV

Back of RF Modulator

(example only)

Connecting the power cord

After everything is connected

properly, plug in the AC power cord

to the power outlet.

Never make or change any connections

with the power switched on.

When no disc is loaded, press

STANDBY ON on the DVD player

front panel.

“NO DISC” may appear on the

display panel.

AUDIO OUT

DIGITAL

OUT

VIDEO O

U

COAXIAL

~ AC MAINS

AUDIO

OUT

V (Pr/Cr)

U (Pb/Cb)

Y

S-VIDEO

IN

VIDEO IN

COMPONENT

VIDEO IN

01-43_dvp3040_37_eng2.indd 1301-43_dvp3040_37_eng2.indd 13 2006-07-14 3:35:26 PM2006-07-14 3:35:26 PM

English

14

Connecting to an stereo

system

Receiver has a PCM, Dolby Digital

or MPEG decoder

A

Select one of the video connections

(CVBS VIDEO IN or COMPONENT

VIDEO IN) depending on the options

available on your TV.

B Connect the COAXIAL jack of the DVD

player to the corresponding Digital Audio

In socket on your receiver (cable not

supplied).

C Set the DVD player’s digital output to

PCM-Only or ALL depending on the

capabilities of your receiver (see page 33

{Digital Output}).

Tip:

– If the audio format of the Digital Output

does not match the capabilities of your

receiver, the receiver will produce a strong,

distorted sound or no sound at all.

Stereo system has Dolby Pro Logic

or right/ left Audio In sockets

A

Select one of the video connections

(CVBS VIDEO IN or COMPONENT

VIDEO IN) depending on the options

available on your TV.

B Use the audio cables (white/red) to

connect AUDIO OUT (L/R) sockets of

the DVD Player to the corresponding

AUDIO IN sockets on the stereo system

(cable supplied).

Connecting to a digital AV

receiver

Optional connections

TIPS: Before making or changing any connections, make sure that all the devices are disconnected

from the power outlet.

AUDIO OUT

DIGITAL

OUT

VIDEO OUT

COAXIAL

AUDIO

IN

STEREO

DIGITAL

AUDIO OUT

DIGITAL

OUT

VIDEO OUT

COAXIAL

AUDIO

IN

DIGITAL

AV Receiver

01-43_dvp3040_37_eng2.indd 1401-43_dvp3040_37_eng2.indd 14 2006-07-14 3:35:26 PM2006-07-14 3:35:26 PM

English

15

Product Overview

Front and Rear Panels

STANDBY ON 2

– Turns on the player or switches

to standby mode

Disc Tray

OPEN/CLOSE

ç

– Opens or closes the disc tray.

Display panel

– Shows information about the

current status of the DVD player.



STOP

– Stops playback

PLAY/PAUSE X

Å

– Starts or interrupts playback.

IR Sensor

– Point the remote control towards

this sensor

Caution: Do not touch the inner pins of the jacks on the rear panel.

Electrostatis discharge may cause permanent damage to the system.

AUDIO OUT

DIGITAL

OUT

VIDEO OUT

COAXIAL

Mains (AC Power Cord)

– Connect to a standard AC outlet

Audio Out (Left/Right)

– Connect to AUDIO inputs of an

ampli er, receiver or stereo

system

COAXIAL (Digital audio out)

– Connect to coaxial AUDIO input

of a digital audio equipment

YPbPr (Component Video Out)

– Connect to YPbPr input of a TV

CVBS (VIDEO Out)

– Connect to CVBS Video input of a

TV

01-43_dvp3040_37_eng2.indd 1501-43_dvp3040_37_eng2.indd 15 2006-07-14 3:35:27 PM2006-07-14 3:35:27 PM

English

16

Product Overview (continued)

Remote Control

SUBTITLE

ZOOM

AUDIO

REPEAT

REPEAT A-B

STOP

PLAY/PAUSE

MUTE

SETUP

TITLE

RETURN

MENU

DISC

DISPLAY

DISC MENU

– Enters or exits the disc

contents menu

– Switches on or off the

playback control mode (for

VCD 2.0 only)

OK

– Con rms an entry or

selection

RETURN/TITLE

– To go back to previous

menu/ show title menu

PREV í

– Skips to the previous title/

chapter/track



STOP

– Stops playback

X

Å

PLAY/PAUSE

– Starts or pauses playback

SUBTITLE

– Selects a DVD subtitle

language

ZOOM

– Enlarge a picture on the TV

screen

REPEAT

– Selects various repeat mode

REPEAT A-B

– Repeats playback a speci c

section on a disc

2

– Turns on the player or to

standby mode

DISPLAY

– Displays information on TV

screen during playback

W X

– Cursor buttons for moving

to the left or right, do a

forward/reverse search.

ST

– Cursor buttons for moving

up/down, do a slow

forward/backward

SETUP

– Enters or exits the system

setup menu

NEXT ë

– Skips to the next title/

chapter/track

MUTE

– Disables or enables sound

output

Alphanumeric keypad

– Selects numbered items in

a menu

AUDIO

– Selects an audio language

(DVD/VCD) or an audio

channel

01-43_dvp3040_37_eng2.indd 1601-43_dvp3040_37_eng2.indd 16 2006-07-14 3:35:27 PM2006-07-14 3:35:27 PM

English

17

Step 1 : Inserting Batteries

A Open the battery compartment.

B Insert two batteries type R03 or AAA,

following the indications (+ –) inside the

compartment.

C Close the cover.

CAUTION!

– Remove batteries if they are

exhausted or if the remote is not to

be used for a long time.

– Do not use old and new or

different types of batteries in

combination.

– Batteries contain chemical

substances, so they should be

disposed of properly.

Using the remote control to

operate the system

A Aim the remote control directly at the

remote sensor (IR) on the front panel.

B Do not put any objects between the

remote control and the DVD player

while operating the DVD player.

Step 2 : Finding your viewing

channel

A Press STANDBY-ON 2 on the DVD

player to turn it on.

B Turn on the TV and set it to the correct

video-in channel. You should see the blue

DVD background screen.

 Usually these channel are between the

lowest and highest channels and may

be called FRONT, A/V IN, VIDEO.

See your TV’s manual for more

details.

 Or, you may go to channel 1 on your

TV, then press the Channel down

button repeatedly until you see the

Video In channel.

 Or, the TV remote control may have

a button or turn that chooses

different video modes.

 Or, set the TV to channel 3 or 4 if

you are using an RF modulator.

C If you are using external equipment, (such

as audio system or receiver), turn it on

and select the appropriate input source

for the DVD player output. Refer to the

equipment user’s manual for detail.

Getting Started

01-43_dvp3040_37_eng2.indd 1701-43_dvp3040_37_eng2.indd 17 2006-07-14 3:35:28 PM2006-07-14 3:35:28 PM

English

18

Getting Started (continued)

Step 3 : Setting up

Progressive Scan feature

(for Progressive Scan TV only)

The progressive scan displays twice the

number of frames per seconds than

interlaced scanning (ordinary normal TV

system). With nearly double the number

of lines, progressive scan offers higher

picture resolution and quality.

Before you start...

– Ensure that you have connected this

DVD player to a progressive scan TV

using the Y Pb Pr connection (see page

12).

– Ensure that you have completed the

basic installation and set-up.

A Turn on your TV and set to interlace

mode (refer to your TV user manual).

B Press POWER on the remote control

to turn on the DVD player.

C Select the correct video-in channel.

 The DVD background menu appears.

D Press SETUP.

E Press S T to select { Video }, then

press X.

Language

Video

Audio

Misc

Rating

Aspect Ratio :

View Mode :

TV System :

Video Out :

Smart Picture :

4:3

Auto Fit

NTSC

Component

Personal

Language

Video

Audio

Misc

Rating

Aspect Ratio :

View Mode :

TV System :

Video Out :

Smart Picture :

4:3

Auto Fit

NTSC

Component

Personal

Language

Video

Audio

Misc

Rating

Aspect Ratio :

View Mode :

TV System :

Video Out Component

Smart Picture

P-Scan

4:3

Auto Fit

NTSC

F Press S T to select { Video Out },

then press X.

G Select { P-Scan }, then press OK to

con rm.

 The menu will appear on the TV.

Activating Progressive Scan

1.Ensure your TV system supports

Progressive Mode

2.If there is a distorted picture on

the TV, wait 15 seconds for

automatic recover

Yes

NO

H Press W to highlight { Yes } and press

OK to con rm.

I Turn on your TV progressive scan mode

(refer to your TV user manual).

 The menu will appear on the TV.

Confirm again to use new setting

Revert to original setting in 14 seconds

Yes

NO

J Press W to highlight { Yes } and press

OK to con rm.

 The setup is now completed and you

can start enjoy the high quality

picture.

To deactivate Progressive Scan

manually:

 Wait for 15 seconds for the auto

recovery.

OR

A Press OPEN/CLOSE ç on the DVD

player to open the disc tray.

B Press numeric keypad ‘1’ on the

remote control for few seconds.

 The DVD background screen appears.

Tip:

– There are some progressive scan TVs and

High-De nition TVs that are not fully

compatible with this unit, resulting in the

unnatural picture when playing back a DVD

VIDEO disc in the progressive scan mode. In

such a case, turn off the progressive scan

feature on both the DVD player and your TV.

TIPS: The underlined option is the factory default setting.

Press W to go back to previous menu item. Press SETUP to exit the menu item.

01-43_dvp3040_37_eng2.indd 1801-43_dvp3040_37_eng2.indd 18 2006-07-14 3:35:28 PM2006-07-14 3:35:28 PM

English

19

Getting Started (continued)

Step 4 : Selecting the

matching color system

The color system of the DVD player, disc

and TV should match in order for the

disc to play. Before changing the TV

system, determine the color system of

your TV.

Language

Video

Audio

Misc

Rating

Aspect Ratio :

View Mode :

TV System :

Video Out :

Smart Picture :

4:3

Auto Fit

NTSC

Component

Personal

Language

Video

Audio

Misc

Rating

Language

Video

Audio

Misc

Rating

Aspect Ratio :

View Mode :

TV System NTSC

Video Out PAL

Smart Picture Multi

4:3

Auto Fit

A Press SETUP.

B Press S T to select { Video }, then

press X.

C Press S T to select { TV System },

then press X.

D Use S T to select one of the options

below:

{ PAL }

Select this if the connected TV has the

PAL color system. It will change the

video signal of an NTSC disc and output

it to PAL format.

{ NTSC }

Select this if the connected TV has the

NTSC color system. It will change the

video signal of a PAL disc and output it to

NTSC format.

{ Multi }

Select this if the connected TV is

compatible with both NTSC and PAL

(multi-system). The output format will be

in accordance with the video signal of the

disc.

E Select a setting and press OK.

 Follow the instructions show on the

TV to con rm the selection (if any).

Confirm again to use new setting

Revert to original setting in 14 seconds

Yes

NO

Changing NTSC to PAL

1.Ensure your TV system supports

PAL Standard

2.If there is a distorted picture on

the TV, wait 15 seconds for

automatic recover

Yes

NO

F Press W to highlight { Yes } and press

OK to con rm.

To reset to default TV color system:

 Wait for 15 seconds for the auto

recovery.

OR

A Press OPEN/CLOSE ç on the DVD

player to open the disc tray.

B Press numeric keypad ‘3’ on the

remote control for few seconds.

 The DVD background menu appears.

Tips:

– Before changing the current TV color

setting, ensure that your TV supports the

‘selected TV System’.

– If there is no proper picture on your TV,

wait for 15 seconds for auto recovery.

TIPS: The underlined option is the factory default setting.

Press W to go back to previous menu item. Press SETUP to exit the menu item.

01-43_dvp3040_37_eng2.indd 1901-43_dvp3040_37_eng2.indd 19 2006-07-14 3:35:28 PM2006-07-14 3:35:28 PM

English

20

Getting Started (continued)

Step 5 : Setting the language

The language options are different

depending on your country or region. It

may not correspond to the illustrations

shown on the user manual.

On-screen display (OSD) language

Select this to change the language of this

DVD player screen display menu.

The menu language (on-screen display)

for the system will remain as you set it.

Language

Video

Audio

Rating

Misc

OSD Language English

Subtitle French

DivX Subtitle Spanish

Audio

German

DVD Menu

Italian

Swedish

Portuguese

Dutch

Danish

A Press SETUP.

B Press S T to select { Language }, then

press X.

C Press S T to select { OSD Language },

then press X.

D Use S T to select a language and press

OK to con rm.

TIPS: The underlined option is the factory default setting.

Press W to go back to previous menu item. Press SETUP to exit the menu item.

Audio, Subtitle and DVD menu

languages

You can choose your preferred language

or soundtrack from audio, subtitles and

DVD menu languages. If the selected

language is not available on the disc, the

disc’s default language will be used

instead.

Language

Video

Audio

Rating

Misc

OSD Language English

Subtitle French

DivX Subtitle Spanish

Audio

German

DVD Menu

Italian

Swedish

Portuguese

Dutch

Danish

A Press SETUP.

B Press S T to select { Language }, then

press X.

C Press S T to highlight one of the

options below, then press X.

{ Audio }

Select this to change disc soundtrack

language.

{ Subtitle }

Select this to change the subtitle language.

{ DVD Menu }

Select this to change the language of the

disc menu.

D Use S T to select a language and press

OK to con rm.

E Repeat steps C - D for other language

settings.

01-43_dvp3040_37_eng2.indd 2001-43_dvp3040_37_eng2.indd 20 2006-07-14 3:35:31 PM2006-07-14 3:35:31 PM

Page is loading ...

Philips DVP3040 User manual

Philips DVP3040 User manual

Related papers

Other documents