Peavey 112E, Classic 112E User manual

  • Hello! I am an AI chatbot trained to assist you with the Peavey 112E User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Classic@
Enclosure
SPECIFICATIONS
Power Handling:
75 W RMS
Transducer:
One 12ā€ Sheffield@ 1230
Impedance, Z:
16 ohms
Input Connections:
One
l/4ā€
phone jack
DESCRIPTION
Offered as a companion enclosure
for the Classic 30, the Classic
112E
is a
closed-back cabinet with a
Sheffield 1230 speaker. The
112Eā€™s
16-ohm
impedance makes it compatible
with any of the Classic
5Os,
Classic
30s
etc.
Each enclosure has a detachable
back section, the removal of which
revoices
the cabinet. However, to
obtain maximum low-end response and
cabinet-induced tone coloration, the
back should remain intact.
One particularly good application for
this enclosure is in a situation where the
room is too small to accommodate two
(or four) twelve-inch speakers. In such
an environment, the Classic
112E
produces a high-volume tone at lower
volumes (with cone distortion), because
twice as much power is delivered to one
twelve-inch speaker, as opposed to
dividing the signal between two twelves.
/