Brigade AC-069-90 (5528) User manual

Brand: Brigade

Model: AC-069-90 (5528)

Type: User manual

This manual is also suitable for

IG PN: 5322B

Scania

Not Compatible

Compatible with AC-069

only

Connection at back of

head unit

Pin B1 triggers Cam1

Pin B2 triggers Cam2*

with 12v supply

MAN

Not Compatible

Compatible with AC-068

and AC-069-90

Vehicle with camera prep use

AC-068 connections found in bulk

head lead through

Vehicle without camera prep

Use AC-069-90 connection at

Back of head unit

1. Ensure the AC-068, AC-069 or AC-069-90 adapters are only used with HARMAN HB A562 or A560 display head units.

2. Purple is camera 1, Green is camera 2.

3. At time of release monitor functions are as follows;

- Unit must be programmed by vehicle manufacturer for camera inputs to become active.

- Cameras should be set to “General camera” when using B1 and B2 inputs. This will allow for primary functionality over other media sources.

- If camera is programmed as “reverse” it will be displayed when reverse gear is selected. All other infotainment functions will override the camera.

- All other programming options require camera to be manually selected with the display “camera” button. All other infotainment functions will override the camera.

4. Please check with the vehicle manufacturer to confirm which monitor the vehicle is equipped with and if it has camera prep (Brigade cannot advise on this).

5. *Pin B2 Can be programmed to trigger Cam2 with no trigger wire connected, or pin B2 can be set to active and receive a hard-wired input.

IF THIS ADAPTER IS USED WITH THE WRONG DISPLAY UNIT

IT MAY RESULT IN IRREVERSIBLE DAMAGE!