Stairmaster OpenHub 900MHz Wireless Receiver Owner's manual

Brand: Stairmaster

Model: OpenHub 900MHz Wireless Receiver

Type: Owner's manual

This manual is also suitable for

900/800MHz Wireless Receiver

Stairmaster OpenHub 900MHz Wireless Receiver Stairmaster OpenHub 900MHz Wireless Receiver is an easy-to-use device that allows users to listen to a variety of audio sources, including TVs, music players, and other devices, wirelessly through headphones. The receiver is compatible with all Stairmaster cardio equipment and can be easily installed in minutes. With its long battery life and simple controls, the Stairmaster OpenHub 900MHz Wireless Receiver is the perfect way to enjoy your favorite audio content while you work out. Here are some of the features and benefits of the Stairmaster OpenHub 900MHz Wireless Receiver:

OWNER’S

MANUAL

8-SERIES

INTEGRATED

WIRELESS

RECEIVER KIT

REGULATORY INFORMATION

FCC

When used in conjunction with the appropriate Star Trac cardio equipment, The MYE WIRELESS RECEIVER HAS been tested and

found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC rules. Under the FCC guidelines, operation

is subject to the following two guidelines: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

EUROPEAN DIRECTIVES

This product, when used in conjunction with the approved cardio equipment, conforms to the requirements of the European

Council directives:

• 89/336/ECC, Electromagnetic Compatibility

• 92/590/EEC, General Product Safety Directives

• 73/23/EEC, Electrical equipment Low Voltage Safety Directive

INTRODUCTION

The MYE MWC5-98 Wireless Receiver allows users to listen to a variety of wall mounted TV’s connected to 900/800MHz

transmitters.

CONTROL BUTTONS

POWER BUTTONS

Turns Main Console ON/OFF

UP/DOWN BUTTONS

Wireless Receiver Mode:

Scrolls though programmed TV numbers (preset transmitters)

DISPLAY CHAN Icon illuminates – Channel Number illuminates 1, 2, 3 etc.

TV Icon illuminates

UP/DOWN BUTTONS

Increases or decreased the volume as selected by the user.

DISPLAY Bar graph depicting volume level in all modes

Note- Volume will default to mid-low level after user unplugs headphone.

PGM BUTTON

Used to enter Program Mode

MUTE BUTTON

Used to Mute and un-mute audio

HIDDEN BUTTON

Used for set up

TV AUDIO RECEIVER

050-2353

PGM

LCD INFORMATION

SET UP INSTRUCTIONS

Transmitter PROGRAMMING MODES

During installation the controller must be programmed to lock the TV transmitters. The product is backwards compatible with

all other brands of transmitters so there will be a total of ve 900MHz and three 800MHz programming modes. In each mode the

receiver will automatically scroll through the frequency bandwidth and “lock-in” the transmitters. Due to spurious emissions and

possible missed transmitters, a manual mode that enables the installer to select individual transmitter channels (each channel is a

designated frequency) and “lock” or “erase” any given channel is also provided.

1. Press and hold the Channel Down and Volume Up buttons simultaneously for three seconds until “P-1” appears on the

display.

2. Press the “Ch Up ” button to select one of the following program modes:

P-1 = MYE Entertainment 900MHz Transmitters

P-2 = Cardio Theater LCS 900MHz Transmitters

P-3 = Cardio Theater / Enercise xTV 900MHz Transmitters

P-4 = BroadcastVision 900MHz Series 1 Transmitters

P-5 = BroadcastVision 900MHz Series 2 Transmitters

P-6 = MYE Entertainment 800MHz Transmitters

P-7 = Cardio Theater 800MHz XTV Transmitters

P-8 = Audeon 800MHz Transmitters

3. After selecting the Transmitter type, press the Hidden button to auto-scan all the frequencies in the transmitter type and

lock in transmitters.

4. Press the Channel Up button to determine all transmitters have been locked in. NOTE: The word “PRESET” will appear in the

display when a transmitter channel is programmed.

5. To SAVE your presets exit program mode press the PGM button. The display will blink then default to rst transmitter

channel programmed

Manual Program Mode (Add or Delete Frequencies)

1. Press Channel Down and Volume UP buttons simultaneously for three seconds until “P-1” appears on the display.

2. Press the “Ch Up” button to select the Transmitter type. (P1, P2, P3, etc.)

3. Press the PGM button to by-pass Auto Scan.

4. Press CHANNEL UP button to scroll through all transmitter channels.

5. To add or delete a transmitter channel press the Hidden button. “PRESET” will appear in the display when a transmitter

channel is programmed.

6. To exit manual program mode press the PGM button again. The display will blink briey and will default to rst transmitter

channel programmed.

SET UP INSTRUCTIONS

Stairmaster OpenHub 900MHz Wireless Receiver Owner's manual

Brand: Stairmaster

Model: OpenHub 900MHz Wireless Receiver

Type: Owner's manual

This manual is also suitable for

900/800MHz Wireless Receiver

Download PDF

report

Stairmaster OpenHub 900MHz Wireless Receiver Owner's manual

This manual is also suitable for

Stairmaster OpenHub 900MHz Wireless Receiver Owner's manual

Related papers

Other documents