Boltune BT-BH001 User guide

Brand
Boltune
Model
BT-BH001
Category
Headphones
Type
User guide

Boltune BT-BH001 Wireless Stereo Earphones are a great choice for anyone looking for a high-quality pair of wireless earbuds. They're easy to use, with a simple pairing process and convenient multifunction button controls. The earphones also have a long battery life, so you can enjoy your music for hours on end without having to worry about running out of power.

With their comfortable fit and IPX5 water resistance, the Boltune BT-BH001 Wireless Stereo Earphones are perfect for working out, running, or just relaxing at home. And with their built-in microphone, you can easily take calls without having to remove your earbuds.

Boltune BT-BH001 Wireless Stereo Earphones are a great choice for anyone looking for a high-quality pair of wireless earbuds. They're easy to use, with a simple pairing process and convenient multifunction button controls. The earphones also have a long battery life, so you can enjoy your music for hours on end without having to worry about running out of power.

With their comfortable fit and IPX5 water resistance, the Boltune BT-BH001 Wireless Stereo Earphones are perfect for working out, running, or just relaxing at home. And with their built-in microphone, you can easily take calls without having to remove your earbuds.

Model: BT-BH001
WIRELESS STEREO EARPHONES
User Guide
1
Product Diagram
①
Volume + / Next
②
Multifunction
③
LED Indicator / Microphone
④
Volume - / Previous
⑤
Micro USB Charging Port
2
How to Wear
Please wear the headphones as shown in the diagram:
1)
Attach the ear hooks onto the earphones.
2)
Wear the earphones and the hooks on your ears and adjust for the best fit.
Package Content
•
1 × Boltune BT-BH001 Wireless Stereo Earphones
•
1 × USB Charging Cable
•
6 × Ear Buds (two are equipped on the earphones)
•
6 × Ear Hooks (two are equipped on the earphones)
•
1 × Travel Pouch
•
1 × User Guide
3
Thank you for choosing the Boltune BT-BH001 Wireless Stereo Earphones. If
you have any questions or issues, please contact our customer support team
by email at
[email protected]
How to Use
1.
Charging
1)
Connect the charging port with any USB charging adapter or active
computer USB port.
2)
Charging will start automatically with LED indicator turning red.
3)
The earphones are fully charged when LED indicator turns blue.
Note: Make sure the battery is fully charged before putting the earphones
away for storage. Charge the earphones at least once every 3 months when
not using for a long time.
2.
Pairing
1)
Make sure the earphones and your Bluetooth
®
device are next to each other
(within 3 feet).
2)
The first time you use the earphones, press and hold the Multifunction
Button until the LED indicator flashes red and blue alternately. Now the
earphones are in pairing mode.
3)
Activate Bluetooth
®
function on your phone and search for the nearby
Bluetooth
®
connection: Find “Boltune BT-BH001” in the search results. Tap
on the name to connect. Once connected, the Blue LED will flash.
Note
：
•
The Bluetooth
®
earphones can remember previous paired devices.
•
If the earphones cannot pair with your Bluetooth device. Press and hold the
Multifunction Button (when the earphones are off) for 10 seconds until the
LED indicator flashes purple twice to clear the pairing history. Then restart
the earphones to pair again.
4
Operation and Functions
Function
Operation
Power On
Press and hold the Multifunction Button for 1
second
Power Off
Press and hold the Multifunction Button for 3
seconds
Enter Pairing Mode
Press and hold the Multifunction Button for 5
seconds
Play / Pause
Press the Multifunction Button once
Volume + / -
Press the Volume + / - Button
Next Track / Previous Track
Press and hold the Volume + / - Button
Answer / Hang up Phone Call
Press the Multifunction Button once
Decline an Incoming Call
Press and hold the Multifunction Button for 1
second
Re-dial Last Call
Press the Multifunction Button twice
Restore to Factory Settings
When the earphones are off, press and hold the
Multifunction Button for 10 seconds until the
LED indicator flashes purple twice
5
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference,
and(2) this device must accept any interference received, including
interference that may cause undesired operation.
WEEE Compliance
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product
and its electronic accessories should not be disposed of with other household
waste at the end of their working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please separate these items
from other types of waste and recycle them responsibly to promote the sustainable
reuse of material resources. Household users should contact either the retailer
where they purchased this product, or their local government office, for details
of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions
of the purchase contract. This product and its electronic accessories should not
be mixed with other commercial wastes for disposal.
EN The Bluetooth
®
word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any use
of such marks by Sunvalleytek International Inc. is under
license. Other trademarks and trade names are those of their respective
owners.
www.boltune.net
NORTH AMERICA
E-mail: support@boltune.net
US Distributor: SUNVALLEYTEK INTERNATIONAL INC.
Address: 46724 Lakeview Blvd, Fremont, CA 94538
MANUFACTURER
Shenzhen NearbyExpress Technology Development Co.,Ltd.
Address: 333 Bulong Road, Shenzhen, China, 518129
MADE IN CHINA
BT-BH001_V1.5
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Boltune BT-BH001 User guide

Brand
Boltune
Model
BT-BH001
Category
Headphones
Type
User guide

Boltune BT-BH001 Wireless Stereo Earphones are a great choice for anyone looking for a high-quality pair of wireless earbuds. They're easy to use, with a simple pairing process and convenient multifunction button controls. The earphones also have a long battery life, so you can enjoy your music for hours on end without having to worry about running out of power.

With their comfortable fit and IPX5 water resistance, the Boltune BT-BH001 Wireless Stereo Earphones are perfect for working out, running, or just relaxing at home. And with their built-in microphone, you can easily take calls without having to remove your earbuds.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents