1. What’s In The Box:
4. How To Use
8. Troubleshooting
9. SEPCIFICATIONS
11. NOTE
4.3 AUX/ 3.5mm Audio Out
4.1 Optical Output
4.2 RCA AUDIO OUT
“ delebal strop etihW/deR(
AUDIO OUT”)
2. Charging:
3. Check Your TV/Audio Source output options
D1 Wireless TV Headphones
① Headphone ② Transmitter ③ 3.5 Audio Cable
④ RCA Audio Cable ⑥ RCA - Female 3.5mm cable
① Headphone ⑤ RCA - Female 3.5mm cable② Transmitter ③ Battery ④ 3.5mm AUX cable
④
3.5mm AUX cable
⑥ AC/DC Adaptor
For TV/DVD/Hi-Fi, switch to -8dB.
For CD/MP3/iPod/Smart phone,
switch to 0dB.
AUDIO
⑦ 3.5mm audio out,
not audio in port
⑥
Optical audio out, not audio in port
⑤ Optical Audio Cable
⑦ Coaxial Audio Cable ⑨ Rechargeable Battery*2
(Installed in headphone)
⑧ AC/DC Adaptor
⑩ User Guide ⑪ 3.5MM to 6.3MM Connector
Before use, please charging for 6 hours.
(Optical connection works best, please use it connection first)
1：Turn OFF the headset
2：Retract the headphone band
Jack Options
Natively
Supported？
Sound Out： Headphone Headphone
Both Headphone
and TV
Both Headphone
and TV
Both Headphone
and TV
Please refer
to Point:
4.1 4.2 4.3 4.4
AUX/3.5mmOptical Output Coaxial Output
RCA(Red/White）
AUDIO OUT
① Headphone
⑥ RCA audio out,
not audio in port
② Transmitter ③ Battery ④ RCA Audio Cable ⑤ AC/DC Adaptor
1. Plug in
3. Plug into TV
2. Switch function button
4. Play sound 5. Turn on
If no sound,
please check the TV setting,
“ ot refer 5. TV setting ”.
(If the headphone flashes
GREEN,
“ wollof esaelp 7. Re-Pair Step” to re-pair the item.)
4.5
Big Phone Jack
N/A
Other RCA jacks
3.5 AUDIO OUT
RCA AUDIO OUT
Optical Output
Optical Output
Green 100% Light Off
CHARGING:
5-7 Hours
⑦RCA - Female 3.5mm cable
OPTICAL
OPTICAL
COAXIAL
COAXIAL
0 dB
RIGHT
LEFT
OFF
ON
-8 dB
AUDIO
ATT.
AUDIO IN
POWER
DC IN 5V
550mA
OPTICAL
OPTICAL
COAXIAL
COAXIAL
0 dB
RIGHT
LEFT
OFF
ON
-8 dB
AUDIO
ATT.
AUDIO IN
POWER
DC IN 5V
550mA
OPTICAL
OPTICAL
COAXIAL
COAXIAL
0 dB
RIGHT
LEFT
OFF
ON
-8 dB
AUDIO
ATT.
AUDIO IN
POWER
DC IN 5V
550mA
3.5 AUDIO OUT
TV
TV
① Headphone ② Transmitter ③ Battery ④ Optical Audio Cable ⑤ AC/DC Adaptor
For TV/DVD/Hi-Fi, switch to -8dB.
For CD/MP3/iPod/Smart phone,
switch to 0dB.
OPTICAL
6. Hear Sound.
Light(Green)
Light(Blue)
1. Plug in
3. Plug into TV
2. Switch function button
4. Play sound 5. Turn on
If no sound,
please check the TV setting,
“ ot refer 5. TV setting ”.
(If the headphone flashes
GREEN,
“ wollof esaelp 7. Re-Pair Step” to re-pair the item.)
OPTICAL
OPTICAL
COAXIAL
COAXIAL
0 dB
RIGHT
LEFT
OFF
ON
-8 dB
AUDIO
ATT.
AUDIO IN
POWER
DC IN 5V
550mA
OPTICAL
OPTICAL
COAXIAL
COAXIAL
0 dB
RIGHT
LEFT
OFF
ON
-8 dB
AUDIO
ATT.
AUDIO IN
POWER
DC IN 5V
550mA
OPTICAL
OPTICAL
COAXIAL
COAXIAL
0 dB
RIGHT
LEFT
OFF
ON
-8 dB
AUDIO
ATT.
AUDIO IN
POWER
DC IN 5V
550mA
4.5 Receiver with 6.3mm phone Jack at Front
⑧Big phone jack,not audio in port
Big Phone Jack
Big Phone Jack
CD
①
Headphone
②
Transmitter
③
Battery
⑥
AC/DC Adaptor
⑤
3.5MM to 6.3MM Connector
For TV/DVD/Hi-Fi, switch to -8dB.
For CD/MP3/iPod/Smart phone,
switch to 0dB.
AUDIO
1. Plug in
3.Plug into CD
2. Switch function button
4. Play sound 5. Turn on
OPTICAL
OPTICAL
COAXIAL
COAXIAL
0 dB
RIGHT
LEFT
OFF
ON
-8 dB
AUDIO
ATT.
AUDIO IN
POWER
DC IN 5V
550mA
OPTICAL
OPTICAL
COAXIAL
COAXIAL
0 dB
RIGHT
LEFT
OFF
ON
-8 dB
AUDIO
ATT.
AUDIO IN
POWER
DC IN 5V
550mA
OPTICAL
OPTICAL
COAXIAL
COAXIAL
0 dB
RIGHT
LEFT
OFF
ON
-8 dB
AUDIO
ATT.
AUDIO IN
POWER
DC IN 5V
550mA
For TV/DVD/Hi-Fi, switch to -8dB.
For CD/MP3/iPod/Smart phone,
switch to 0dB.
AUDIO
1. Plug in
3. Plug into TV
2. Switch function button
4. Play sound 5. Turn on
If no sound,
please check the TV setting,
“ ot refer 5. TV setting ”.
(If the headphone flashes
GREEN,
“ wollof esaelp 7. Re-Pair Step” to re-pair the item.)
OPTICAL
OPTICAL
COAXIAL
COAXIAL
0 dB
RIGHT
LEFT
OFF
ON
-8 dB
AUDIO
ATT.
AUDIO IN
POWER
DC IN 5V
550mA
OPTICAL
OPTICAL
COAXIAL
COAXIAL
0 dB
RIGHT
LEFT
OFF
ON
-8 dB
AUDIO
ATT.
AUDIO IN
POWER
DC IN 5V
550mA
OPTICAL
OPTICAL
COAXIAL
COAXIAL
0 dB
RIGHT
LEFT
OFF
ON
-8 dB
AUDIO
ATT.
AUDIO IN
POWER
DC IN 5V
550mA
RCA AUDIO OUT
TV
4.4 Coaxial Output
① Headphone
⑥ Coaxial audio out,
not audio in port
② Transmitter ③ Battery ④ Coaxial Audio Cable ⑤ AC/DC Adaptor
For TV/DVD/Hi-Fi, switch to -8dB.
For CD/MP3/iPod/Smart phone,
switch to 0dB.
COAXIAL
1. Plug in
3. Plug into TV
2. Switch function button
4. Play sound 5. Turn on
If no sound,
please check the TV setting,
“ ot refer 5. TV setting ”.
(If the headphone flashes
GREEN,
“ wollof esaelp 7. Re-Pair Step” to re-pair the item.)
OPTICAL
OPTICAL
COAXIAL
COAXIAL
0 dB
RIGHT
LEFT
OFF
ON
-8 dB
AUDIO
ATT.
AUDIO IN
POWER
DC IN 5V
550mA
OPTICAL
OPTICAL
COAXIAL
COAXIAL
0 dB
RIGHT
LEFT
OFF
ON
-8 dB
AUDIO
ATT.
AUDIO IN
POWER
DC IN 5V
550mA
OPTICAL
OPTICAL
COAXIAL
COAXIAL
0 dB
RIGHT
LEFT
OFF
ON
-8 dB
AUDIO
ATT.
AUDIO IN
POWER
DC IN 5V
550mA
Coaxial Output
TV
Coaxial Output
5. TV Setting
6. Phone- Test
7. Re-Pair Step
① Turn the power button to OFF of
transmitter.
OPTICAL
OPTICAL
COAXIAL
COAXIAL
0 dB
RIGHT
LEFT
OFF
ON
-8 dB
AUDIO
ATT.
AUDIO IN
POWER
DC IN 5V
550mA
OPTICAL
OPTICAL
COAXIAL
COAXIAL
0 dB
RIGHT
LEFT
OFF
ON
-8 dB
AUDIO
ATT.
AUDIO IN
POWER
DC IN 5V
550mA
ITEM
Transmitter Mode:
Carrier Frequency:
Operating Voltage:
Frequency Response:
Work Time:
Charging Time:
Distortion:
Signal-to-noise Ratio:
Range:
Digital Hopping System
2.4 GHz
Transmitter 5V;
Headphone 2*1.2V AAA
20 Hz - 20 kHz
12 hours
4-6 hours
0.5%
85dB
Obstacle 10 meters,
barrier-free 30 meters
SPECIFICATION
Comes back
with full
volume for a
few seconds
Sound only
on one ear.
The headset
has sound, but
TV has no
sound. Or both
TV and
headphones
have sound.
Don't work on
our optical TV.
The headset cannot keep the
volume, defualt volume is high.
It may connect to 3.5mm audio
& video port(3.5mm AV port),
only one channel of audio will
output.
3.5mm AUX port only supports
that headset receives sound,
with TV no sound. While, using
RCA and optical port, both TV
and headphone get sounds.
Meanwhile, need to set the
audio mode on TV.
Setting is wrong.
When turn on the headphone, keep the
TV sound low or turn volume dowm
before wear it.
Use with RCA connection, coaxial or
optical connection.
1. Use RCA connection or optical
connection. For watching TV quietly
alone, click MUTE key to close the TV
speaker by TV remote. 2. Ensure TV
mm5.3 htiw ”tesdaeH“ ot tes si rekaeps
connection. TV speaker is set to
“External Speaker” with RCA or optical
connection. 3. Set the digital audio
output of your device/audio source to
"PCM" on TV.
Check the TV setting:
3.5mm AUX and RCA→Headphone
Optical/Coaxial → Digital Sound Out <PCM>
Transmitter setting:
3.5mm AUX and RCA→AUDIO
Optical → OPTICAL
Coaxial → COAXIAL
Problem
Possible cause Possible solutions
No sound, only
buzz sound,
static, I tried
everything,
doesn't work.
The batteries are already
installed on the headphones
before shipping.
Power off, or battery is low.
Wrong audio input is selected.
Audio plug is not properly
connected.
Audio source is switched off.
OPTICAL/COAXIAL/AUDIO
select switch setting wrong.
Volume of headset is low.
Digital audio connection uses
incompatible data
transmission settings.
Volume of the analog audio
source is either set to the
minimum or is on mute.
Audio cable is defective.
Charge the battery, turn on headset.
Select the other AUDIO OUT.
Check the audio plug connection.
Switch ATT. Button to right side
(0dB, -8dB).
Turn up the volume of headset.
Set the digital audio output of your
device/audio source to "PCM" on TV.
Increase the volume on the audio
source to at least a medium level /
Deactivate the muting function from
the audio source.
Contact us, will ship the replace parts
to you.
Switch the audio source on.
Connect via 3.5mm AUX or RCA cable,
please switch to AUDIO.
Connect via optical cable, please swtich
to OPTICAL.
Connect via coaxial cable, please switch
to COAXIAL.
Contact us, will ship the missing parts
to you, and compensate you.
Problem
Possible cause Possible solutions
When the
package is
recevied, the
batteries are in
the earphone,
and some parts
are lost.
Cannot not
charge
The volume
control doesn't
work.
Sound
dropouts/
disappear
Sound is too
low
Static, because other wireless
devices will interfere with the
signal of headset.
The LED on headphone is RED.
It means the transmitter
doesn't pair with the
headphone. Pair between
headphone and transmitter
is failed.
Poor charge contact since the
charging pin are not contact
correctly.
Button is defective.
Connection is interrupted due
to the distance being too far
(over 30M / 100ft).
Signal is shielded.
Headphones will automatically
switch OFF if no audio signal or
too weak sound is received in 5
minutes. So if no audio input
or too weak, will turn off.
Volume of headset is low.
Volume of the analog audio
source is adjusted too low.
Keep the transmitter away from the TV,
WiFi routers and other wireless
transmitters.
Please see the 5. RE-PAIR STEP to
re-pair the unit.
Please retract the headphone band to
contact with charging pin correctly
when charging.
Please contact us,
we will replace a new set to you.
Keep closer to the transmitter.
Remove obstacles between the
transmitter and headphones.
Play TV sound again and restart the
headset.
Switch ATT. Button to right side
(0dB, -8dB).
Turn up the volume of headset.
Change connection, optical connection
will get a better sound quality.
Increase the volume on the analog
audio source to at least a medium level.
Problem
Possible cause Possible solutions
Easy to use at
the beginning,
it doesn'y work
later, no sound,
often stop
working, and
cannot work
for 12 hours
Headphones will automatically
switch OFF if no audio signal or
too weak sound is received in 5
minutes. So if no audio input or
too weak, will turn off.
Play TV sound again and restart the
headset.
Problem
Possible cause Possible solutions
1 2
3 4
5 6
7 8
9 10
11 12
13 14
15 16
17 18
NOTES:
Transmitter is NOT compatible with ANY RCA(L/R)port on
back of your AV Receiver, ONLY use the BIG 6.35MM PHONE
OUT on front side of your AV Receiver with the 3.5MM to
6.35MM adaptor.
Do NOT set the volume too high.
Plug wired ear buds to the port, check whether the sound
is normal.
If no sound after connect with TV, Please use
phone to test the headphone whether work
great,If work great, Please try to re-pair and
connect headphone to Your TV.If also has
problem, please feel free to contact us to
solve the problem in your favor.
②Turn off the headphone and then turn it
on again,press and hold the headphone
power button until the red light change to
quickly flashing green light.
Note: Please remember let the headphone
flash green light, then turn on the power
button to ON of the transmitter, If you do
not follow the sequence, the connection
will be unsuccessful
③ Turn on the power button to ON of
the transmitter , you will hear a beep
from the headphone, and then
headphone change from flash green
to Steady green light. Indicates
successful pairing
1. Be sure to turn on the headset until after the completion
of the connection. If you turn on the headphone first,
then connect to device via cable, you will hear current
noise, even blasting sound, because of the connect
between cable and port.
2. Never attempt to recharge conventional dry cells.
3. Batteries (battery pack or batteries installed) shall not
be exposed to excessive heat such sunshine, fire or
the like.
4. Never use another type of battery or non-rechargeable
batteries to replace the rechargeable (LR03/AAA)
batteries supplied.
5. When the headphones are not in use, switch it OFF to
avoid damaging the batteries.
6. Excessive sound pressure from earphones and
headphones can cause hearing loss.
10. INDICADOR LED
D1
Headphone
Transmitter
Power on
(search for pairing)
Blue light flashes
and then lights up
Blue light off
Blue light is on
Blue light is off, green light is on
Red light turns green
Blue light off
Red light turns Flashing green
Green light is on
Turn Off
Successful pairing
(no audio input)
Audio input
after standby
Red light flashes after a few minutes
No audio source input in
fiber/coaxial mode
charging
Green light off
finished charging
Red light is on
Fiber optic/coaxial switch
Power on
Re-pair
Red light flashes
Not enough power
Turn Off
Successful pairing
(with audio input)
Successful pairing
(no audio input)
Model Status Indicator light
The blue light goes out after a few
minutes (standby)
The red light stays on
for a few minutes
6. Hear Sound.
Light(Green)
Light(Blue)
6. Hear Sound.
Light(Green)
Light(Blue)
6. Hear Sound.
Light(Green)
Light(Blue)
6. Hear Sound.
Light(Green)
Light(Blue)
The plastic caps need to be removed
NOTE：
(Installed in headphone)
(Installed in headphone)
(Installed in headphone)
(Installed in headphone)
(Installed in headphone)
工艺：骑马钉 书纸８０g 页数：20P
料号：98-01-2279A 成品尺寸：150X170mm
印刷请按以下顺序（页码）排版
封面
封底
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
T'nB ADA4 Datasheet
-
Sharper Image TV Wireless Headphones Owner's manual
-
Avantree HT280 User manual
-
T'nB ADA8 Datasheet
-
Wintal WDH11 User manual
-
-
headphonehonesty 5.0 Bluetooth Headphones Flashing Red And Blue User manual
-
Arkon D1 2.4G Digital Hi-Fi Wireless Headphones User manual
-
BESIGN BTH01 User guide
-
T'nB ADA7 Datasheet
