Toyota Yaris Hybrid Quick Manual

Yaris Hybrid

Brief Guide

1

Table of Contents

Caution: High voltage components 2

Hybrid battery air vent 2

Accessing your vehicle 3-4

Electric windows and windows lock

(on some models) 5

Steering wheel adjustment 5

Seat and seat belt adjustment 6

Instrument Panel Overview 7-8

Instrument Cluster 9

Multi-information display 10

Starting your vehicle 11

Hybrid transmission 12

Heating, A/C and de-misting 13

Lights 14

Wipers 14

Fuel tank opening 15

Bonnet opening 15

Eco-Driving 16

Introducing Yaris Hybrid

Thank you for buying a Yaris Hybrid. We trust this Brief Guide will enable you to become

familiar with your vehicle’s basic operations and assist you in enjoying your vehicle.

This Brief Guide does not replace or substitute the Owner’s Manual, which you will find in the

vehicle’s glove compartment. It is important that you review the full Owner’s Manual as well as

any further supplementary manuals as this will allow you to familiarise yourself with the

operating and safety instructions and to handle the vehicle within its limitations.

Please do read all documents in your pack as this will ensure you get maximum performance

from your car and learn about related services offered.

Your retailer and everyone on the staff at Toyota wish you many years of enjoyable driving in

your new Yaris Hybrid.

NB: All information contained in this Brief Guide are current at the time of printing. Toyota

reserves the right to make changes at any time without notice.

2

Caution: High voltage components

Hybrid battery air vent

1. Caution label.

2. Service plug.

3. Air conditioning compressor.

4. Electric motor (Traction motor).

5. Power control unit with DC/DC converter.

6. Hybrid battery (Traction battery).

7. High voltage cables (orange).

There is an air intake vent on the side of the lower

part of the rear left seat for the purpose of cooling

the hybrid battery (traction battery). If the vent

becomes blocked, the hybrid battery (traction

battery) may overheat, leading to a reduction in

hybrid battery output.

Take care when handling the hybrid system, as it contains a high

voltage system and some parts become extremely hot.

3

Accessing your vehicle

Vehicles without smart entry & start

system

1

. Key with a wireless remote control function.

2. Key without a wireless remote control function.

3. Key number plate

If you should lose your keys or if you need additional

keys, duplicates can be made using the key number.

Vehicles with a push-button start system

1. Electronic keys

2

. Mechanical keys

3

. Key number plate

1. Unlock.

2. Lock.

Move the lock lever to the "LOCK" position as shown

on the label, then the door cannot be opened with the

inside door handle. This is to prevent children from

opening the rear doors.

Rear door child-protector lock (5-door only)

The Mechanical Key is stored within the

Electronic Key.

4

Entry & start system (applicable for vehicles with smart entry and smart start)

1. Unlocks all the doors.

2. Locks all the doors.

1. Locks the door (driver’s side only).

2. Unlocks the door (driver’s side only).

The front doors can be opened by pulling the inside

handle even if the lock button is in the lock position.

Door lock switch

Type A

Type B

1. Unlocks and locks the side doors.

2. Unlocks and locks the back door.

3. Starts the hybrid system.

Accessing your vehicle

5

Window lock switch

The steering wheel can be adjusted to a

comfortable position

Steering wheel adjustment

Hold the steering wheel and push the lever down.

Adjust to the ideal position by moving the steering

wheel horizontally and vertically.

After adjustment, pull the lever up to secure the

steering wheel.

Electric windows and windows lock

(on some models)

The power windows can be opened and closed using the switches

O

perating the switch moves the windows as follows:

1. Closing

2. One-touch closing (driver’s side only)*

3. Opening

4. One-touch opening (driver’s side only)*

*: Pushing the switch in the opposite direction will

stop window travel partway.

Press the switch down to lock the passenger window

switches.

Use this switch to prevent children from accidentally

opening or closing a passenger window.

The steering wheel must not be adjusted while the vehicle is in motion.

6

1. Seat position adjusting lever.

2. Seat back angle adjusting lever.

3. Vertical seat height adjusting lever (on some

models).

4. Seat back lock release lever (3 doors models).

To fasten your belt, pull it out of the retractor and

insert the tab into the buckle.

You will hear a click when the tab locks into the

buckle.

The seat belt length automatically adjusts to your size

and the seat position.

1. Lower the head seat restraint to the lowest

position.

2. Stow the rear seat belt buckles as shown.

3. Pull the seat back lock release knob and fold the

seat back down. Each seat back may be folded

separately.

Seat and seat belt adjustment

Make sure that all occupants are wearing their

seat belts before driving the vehicle.

Adjusting front seats Fold-down rear seat

Seat belts

7

Instrument Panel Overview

Gauge and meters

M

ulti-information display

A

UX port/USB

port*

SRS driver knee airbag*

Cigarette lighter*

Power outlet*

Glove box

Bonnet lock release lever

Fuel filler door opener

*If equipped

8

Instrument Panel Overview

A

B

*: If equipped

Windscreen wiper and washer switch

R

ear window wiper and washer switch*

Engine (ignition) switch

(vehicles without an

electronic key)

Power (ignition) switch (vehicles with an electronic key)

Outside rear view mirror switches*

Manual headlight leveling dial

Tilt and telescopic steering lock release lever

Headlight switch

Turn signal lever

Front fog light switch*/

Rear fog light switch

9

Instrument Cluster

Main indicator symbols and warning lights

* on some models

For full details of indicators symbols and warning lights, please consult your Owner's Manual Chapter 2-2

Brake system warning

light

Anti-lock brake system

warning light

Discharge

warning light

Low engine oil pressure

warning light

Malfunction indicator

lamp

Power steering system

warning light

Low fuel level indicator

light

Low engine coolant

temperature indicator

light

High engine coolant

temperature warning

light

Fuel filter warning light

(Diesel models only)

“ECO MODE” indicator SRS warning light Multi-mode manual

transmission warning

light*

Vehicle stability control

system*

Smart entry and start

system warning light*

EV drive mode

indicator

Front passenger airbag

“OFF”

Engine oil change

reminder light*

EV indicator Stop & Start indicator

1. Tachometer:

Displays the engine speed in revolutions per

minute.

2. Speedometer:

Displays the vehicle speed.

3. Clock.

4. Outside temperature display.

5. Fuel gauge:

Displays the quantity of fuel remaining in the tank.

6. Display change button.

7. Odometer, trip meter and multi-information

display.

8. Clock adjusting buttons.

9. Hybrid system Indicator.

Displays hybrid system power output and

regenerative level.

7

68

21 3 4 5

9

10

Multi-information display

The multi-information display presents

the driver with a variety of driving-related

data.

•

Odometer

•

Trip meter

•

Stop & Start system operation time

(if equipped)

•

Stop & Start system total operation time (if

equipped)

•

Trip information

Displays driving range, fuel consumption and

other cruising-related information.

•

Instrument panel light control

•

EV indicator customisation

You can view the status of your hybrid system on the “touch screen”.

For details, see the owner's manual, chapter 1-1

*If equipped

Energy/monitor/consumption screen*

11

Starting your vehicle

Engine switch positions:

1. Lock: The steering wheel is locked and the key can

b

e removed.

2

. ACC: Some electrical equipment such as audio can

be used.

3. On: All electrical equipment can be used.

4. Start: For starting the hybrid system.

Vehicles without an electronic key

1. Check that the parking brake is set.

2. Check that the shift lever is set in P.

3. Firmly depress the brake pedal.

Turn the switch to “START” position, continue

depressing the brake pedal until Hybrid system is

started.

Starting the Hybrid system

Vehicles with an electronic key

1. Check that the parking brake is set.

2. Check that the shift lever is set in P.

3. Firmly depress the brake pedal.

Press the “POWER” switch, continue depressing the

brake pedal until Hybrid system is started.

The vehicle can move when the "READY" indicator is on.

12

Hybrid transmission

With the power on, move the shift lever with the

brake depressed, when shifting from “P” or “R” to

another position.

In EV drive mode, the electric motor (traction motor),

powered by the hybrid battery (traction battery), is

used to drive the vehicle.

This mode allows you to drive in residential areas

early in the morning and late at night, or in indoor

parking lots etc without concern for noises and

exhaust gas emissions.

EV Drive mode

For details, see details in your Owner’s manual

Chapter 2-1

13

Heating, A/C and de-misting

Manual air conditioning system*

Automatic air conditioning system

1

4

5

11

1

2

3

2 73

4

4 5 6

10

12

13

8

9

1. Air outlet selector dial

2. Outside/recirculated air mode dial

3. Temperature control dial

4. Cooling and dehumidification function on/off

button (if equipped)

5. Fan speed control dial

1. Cooling and dehumidification function

on/off button

2. Left side temperature control dial

3. Left side temperature display

4. Fan speed display

5. Air outlet display

6. Right side temperature display

7. Right side temperature control dial

8. Windscreen defogger button

9. Air outlet selector button

10. “OFF” button

11. Fan speed control button

12. Automatic mode button

13. Outside/recirculated air mode button

14. Dual mode button

14

*If equipped

14

Lights

Headlights

1. The front position, tail, license plate and

i

nstrument panel lights turn on.

2

. The headlights and all of the lights above turn on.

3. All lights turn on or off automatically when the

engine is on depending on outside light intensity.

High-low beams

For high beams, turn the headlights on and push the

lever away from you (position 1).

Pull the lever toward you for low beams.

To flash the high beam headlights, pull the lever all

the way back (position 2). The high beam headlights

turn off when you release the lever.

Windscreen wipers and washer

1. Intermittent windscreen wiper operation

2. Low speed windscreen wiper operation

3. High speed operation

4. Temporary operation

To spray washer fluid, pull the lever toward you.

Rain-sensing windscreen wiper

(if equipped)

With "AUTO" selected, the wiper will operate

automatically when the sensor detects rain and

adjust the timing according to rain volume and

vehicle speed.

1. Rain-sensing wiper operation (AUTO)

2. Low speed wiper operation

3. High speed operation

4. Temporary operation

Wipers

15

Bonnet opening

To open the bonnet:

1. Pull the bonnet lock re lease lever.

The bonnet will spring up slightly.

2. In front of the vehicle, pull up on the auxiliary

catch lever and lift the bonnet.

3. Hold the bonnet open by inserting the support rod

into the slot.

Fuel tank opening

1. To open the fuel filler door, pull the lever up. 2. To remove the fuel tank cap, turn the cap slowly

counter clockwise, then pause slightly before

removing it. Hang the tether as shown in the

illustration.

Take care to select the correct fuel

16

YARHY11-0412ENUK-00-00

Eco-Driving

Total potential saving of 20 - 30%.

Eco-Driving Savings

Roof load increases wind drag and

therefore consumption.

Open windows increase fuel

consumption by an average of 5%.

Starting

•

Remove any extra weight and roof load

•

Plan your route to avoid detours

•

Avoid using your car for short journeys

Checking/maintenance

•

Check your tyre pressures regularly

•

Service your car according to owner’s manual

Driving

•

Only use electrical accessories when necessary (e.g. A/C)

•

Follow and anticipate the traffic flow

•

Keep your windows closed (use ventilation system when possible)

•

Switch off your engine if you have to wait longer than 30 - 60 seconds

How to Eco-Drive?

Roof Load

(Speed at 120 km/hr)

Increased

consumption

Luggage rack 5 – 10%

Ski box 10 – 20%

Bicycle rack 30%

Loaded luggage rack 35 – 40%

Air Conditioning

can result in 10 - 25%

extra fuel consumption.

Low Tyre Pressure result in higher fuel consumption

(up to 3% extra from 0.5 bar too low)

Tyre pressures can fall by 2.5 - 5.0% after one month,

and by 20% after 5 months.

What is ‘‘Eco-Driving’’?’

•

Eco-Driving = Driving in a more careful and environmentally responsible way

•

E

co-Driving = Reduced fuel costs

•

Eco-Driving = Reduced Environmental impact á Saving of CO

2

emissions.

YARHY11-0412ENUK-00-00

Toyota Yaris Hybrid Quick Manual

Toyota Yaris Hybrid Quick Manual

Related papers

Other documents