Tripp Lite N201-005-GN
The Tripp Lite N201-005-GN is a 5-foot green Cat6 Gigabit Snagless Patch Cable. It meets Category 6 cabling standards and most current industry standards including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801, and ETL (Category 6, draft 11). This cable drastically reduces impedance and structural return loss compared to standard 100MHz wire.
The Tripp Lite N201-005-GN is constructed with high-quality copper wire and a staggered-pin plug design to keep near-end crosstalk levels to a minimum.
Tripp Lite N201-005-GN
The Tripp Lite N201-005-GN is a 5-foot green Cat6 Gigabit Snagless Patch Cable. It meets Category 6 cabling standards and most current industry standards including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801, and ETL (Category 6, draft 11). This cable drastically reduces impedance and structural return loss compared to standard 100MHz wire.
The Tripp Lite N201-005-GN is constructed with high-quality copper wire and a staggered-pin plug design to keep near-end crosstalk levels to a minimum.
Tripp Lite N201-005-GN
The Tripp Lite N201-005-GN is a 5-foot green Cat6 Gigabit Snagless Patch Cable. It meets Category 6 cabling standards and most current industry standards including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801, and ETL (Category 6, draft 11). This cable drastically reduces impedance and structural return loss compared to standard 100MHz wire.
The Tripp Lite N201-005-GN is constructed with high-quality copper wire and a staggered-pin plug design to keep near-end crosstalk levels to a minimum.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI