Pyle PLAD3300D User manual

Category
Audio amplifiers
Type
User manual

Pyle PLAD3300D is a monoblock subwoofer amplifier designed for car audio systems. With 1 Ohm stability and a power output of 1x 600W RMS at 4 Ohms, 1x 1800W MAX at 2 Ohms, and 1x 3600W MAX at 1.3 Ohms, it delivers exceptional bass performance. It features a variable low-pass filter (50Hz - 150Hz), subsonic control (15Hz - 40Hz), and a phase shift switch (0-180 degrees) for precise audio tuning. The built-in bass boost control allows for up to 18dB of bass enhancement, adding depth and impact to your music.

Pyle PLAD3300D is a monoblock subwoofer amplifier designed for car audio systems. With 1 Ohm stability and a power output of 1x 600W RMS at 4 Ohms, 1x 1800W MAX at 2 Ohms, and 1x 3600W MAX at 1.3 Ohms, it delivers exceptional bass performance. It features a variable low-pass filter (50Hz - 150Hz), subsonic control (15Hz - 40Hz), and a phase shift switch (0-180 degrees) for precise audio tuning. The built-in bass boost control allows for up to 18dB of bass enhancement, adding depth and impact to your music.

  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Pyle PLAD3300D User manual

Category
Audio amplifiers
Type
User manual

Pyle PLAD3300D is a monoblock subwoofer amplifier designed for car audio systems. With 1 Ohm stability and a power output of 1x 600W RMS at 4 Ohms, 1x 1800W MAX at 2 Ohms, and 1x 3600W MAX at 1.3 Ohms, it delivers exceptional bass performance. It features a variable low-pass filter (50Hz - 150Hz), subsonic control (15Hz - 40Hz), and a phase shift switch (0-180 degrees) for precise audio tuning. The built-in bass boost control allows for up to 18dB of bass enhancement, adding depth and impact to your music.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI