Millenium MPS-850 E-Drum Set User manual

MPS-850

e-drum module

user manual

Musikhaus Thomann

Thomann GmbH

Hans-Thomann-Straße 1

96138 Burgebrach

Germany

Telephone: +49 (0) 9546 9223-0

E-mail: [email protected]

Internet: www.thomann.de

19.03.2021, ID: 428224 (V3)

Table of contents

1 General information....................................................................................................................................................................................................... 4

1.1 Further information................................................................................................................................................................................................. 4

1.2 Notational conventions.......................................................................................................................................................................................... 4

1.3 Symbols and signal words.................................................................................................................................................................................... 5

2 Safety instructions.......................................................................................................................................................................................................... 6

3 Features................................................................................................................................................................................................................................ 7

4 Installation.......................................................................................................................................................................................................................... 8

5 Connections and controls............................................................................................................................................................................................ 9

6 Operating.......................................................................................................................................................................................................................... 12

6.1 Functions.................................................................................................................................................................................................................. 12

6.2 Selecting and adjusting drum kits................................................................................................................................................................... 12

6.3 Playing the drum kit.............................................................................................................................................................................................. 13

6.4 Modifying drum kits.............................................................................................................................................................................................. 14

6.5 Playing, customising and accompanying songs........................................................................................................................................ 16

6.6 Metronome function............................................................................................................................................................................................ 17

6.7 Fader........................................................................................................................................................................................................................... 18

6.8 Recording functions.............................................................................................................................................................................................. 18

6.9 Trigger settings....................................................................................................................................................................................................... 20

6.10 Utility menu........................................................................................................................................................................................................... 22

6.11 Compression......................................................................................................................................................................................................... 23

6.12 USB stick functions.............................................................................................................................................................................................. 23

6.13 Reset to defaults.................................................................................................................................................................................................. 25

7 Technical specications............................................................................................................................................................................................. 26

8 Plug and connection assignment.......................................................................................................................................................................... 27

9 Cleaning............................................................................................................................................................................................................................. 28

10 Protecting the environment.................................................................................................................................................................................... 29

11 Appendix........................................................................................................................................................................................................................... 30

11.1 Voice list.................................................................................................................................................................................................................. 30

11.2 Kit list........................................................................................................................................................................................................................ 36

11.3 Song list................................................................................................................................................................................................................... 38

11.4 MIDI implementation......................................................................................................................................................................................... 39

11.5 General MIDI Backing Instrument List......................................................................................................................................................... 41

11.6 General MIDI Drum Kit List............................................................................................................................................................................... 43

Table of contents

MPS-850

3

1 General information

This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all

instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the

device to another user, be sure that they also receive this manual.

Our products and user manuals are subject to a process of continuous development. We therefore reserve the right to make

changes without notice. Please refer to the latest version of the user manual which is ready for download under

www.thomann.de.

1.1 Further information

On our website (www.thomann.de) you will nd lots of further information and details on the following points:

Download This manual is also available as PDF le for you to download.

Keyword search Use the search function in the electronic version to nd the topics of interest for you quickly.

Online guides Our online guides provide detailed information on technical basics and terms.

Personal consultation For personal consultation please contact our technical hotline.

Service If you have any problems with the device the customer service will gladly assist you.

1.2 Notational conventions

This manual uses the following notational conventions:

Letterings

The letterings for connectors and controls are marked by square brackets and italics.

Examples: [VOLUME] control, [Mono] button.

Displays

Texts and values displayed on the device are marked by quotation marks and italics.

Examples: ‘24ch’ , ‘OFF’ .

Instructions

The individual steps of an instruction are numbered consecutively. The result of a step is indented and highlighted by an arrow.

Example:

1. Switch on the device.

2. Press [Auto].

ð

Automatic operation is started.

3. Switch o the device.

General information

e-drum module

4

Cross-references

References to other locations in this manual are identied by an arrow and the specied page number. In the electronic version of

the manual, you can click the cross-reference to jump to the specied location.

Example: See

Ä

‘Cross-references’ on page 5.

1.3 Symbols and signal words

In this section you will nd an overview of the meaning of symbols and signal words that are used in this manual.

Signal word Meaning

DANGER! This combination of symbol and signal word indicates an immediate dangerous sit‐

uation that will result in death or serious injury if it is not avoided.

CAUTION! This combination of symbol and signal word indicates a possible dangerous situa‐

tion that can result in minor injury if it is not avoided.

NOTICE! This combination of symbol and signal word indicates a possible dangerous situa‐

tion that can result in material and environmental damage if it is not avoided.

Warning signs Type of danger

Warning – danger zone.

General information

MPS-850

5

2 Safety instructions

Intended use

Drum modules are intended to be used for converting digital trigger signals from drum pads to various percussion sounds. Use

the unit only as described in this manual. Any other use or use under other operating conditions is considered to be improper and

may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.

This device may be used only by persons with sucient physical, sensorial, and intellectual abilities and having corresponding

knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is

responsible for their safety.

Safety

DANGER!

Danger for children

Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children.

Choking hazard!

Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and

choke!

Never let children unattended use electrical devices.

CAUTION!

Possible hearing damage

With loudspeakers or headphones connected, the device can produce volume levels that may cause temporary or permanent

hearing impairment.

Do not operate the device permanently at a high volume level. Decrease the volume level immediately if you experience

ringing in your ears or hearing impairment.

NOTICE!

Operating conditions

This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture.

Avoid direct sunlight, heavy dirt, and strong vibrations.

NOTICE!

External power supply

The device is powered by an external power supply. Before connecting the external power supply, ensure that the input

voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit

breaker. Failure to do so could result in damage to the device and possibly the user.

Unplug the external power supply before electrical storms occur and when the device is unused for long periods of time to

reduce the risk of electric shock or re.

Safety instructions

e-drum module

6

3 Features

n 550 voices

n 30 preprogrammed drum kits

n 20 user kits

n 100 preprogrammed songs

n 2 user songs

n Quick record

n Metronome

n EQ per kit

n Pitch, reverb, compressor

n Flexible assignment of pad voices

n 6 fader for the volume control of individual pads

n Reverb eect, voice tuning

n Individual adjustment of accompaniment and drum track

n Connections for headphones, AUX, USB and MIDI

Features

MPS-850

7

4 Installation

Setup, connecting pads and pedals

Setup and assembly of the pads and pedals are described in detail in the enclosed assembly guide. Finally check that all cables

between the pads and the e-drum module have been properly connected.

Connecting the power adapter

Use the Y cable to connect the supplied power adapter to the [9 V] port of the e-drum module and the hi-hat controller. Then

plug the mains plug into the socket.

Connecting headphones

Connect your stereo headphones to the [PHONES] output of the drum module.

Connecting audio devices

Connect the inputs of your amplier or active monitors to the [OUTPUT] sockets of the drum module. If you use a mono amplier,

connect its input to the [L/MONO] output socket of the module.

Connecting a CD or MP3 player

Connect a CD or MP3 player to the input socket [AUX IN] IN of the drum module.

Connecting MIDI devices

Connect external MIDI devices to the [MIDI OUT] or [MIDI IN] socket of the drum module.

Connecting USB devices

Connect external MIDI devices or your computer to the USB port [USB MIDI] of the drum module.

Installation

e-drum module

8

5 Connections and controls

Front panel

1 Display

2 [POWER]

Main switch. Turns the device on and o

3 [MENU]

Button to open the selection menu

4 [SAVE]

Button to store settings

5 [VOLUME – MASTER]

Overall volume control

6 [VOLUME – AUX IN]

Volume control for the AUX input signal

7 [VOLUME – PHONES]

Volume control for the headphone output of the device

8 [EXIT]

Button to close and exit an open menu

9

/

Arrow buttons to select an option

Connections and controls

MPS-850

9

10 [ENTER]

Button to conrm a selection or setting

11 [TEMPO]

Button to adjust metronome and playback tempo

12 [CLICK]

Button to turn the metronome on and o

13

Button to start and stop song playback

14

Button to activate the recording function

15 Jog wheel to select a drum kit and quickly set values

16 Fader with switchable assignment for adjusting the volume of individual pads

17 [FADER]

Button for switching the fader assignment

18 [SONG]

Button to open the ‘SONG’ menu

19 [KIT]

Button to open the ‘KIT’ menu

20 [<] / [>]

Arrow buttons to select a drum kit and quickly set values

Connections and controls

e-drum module

10

Rear panel

21 [PHONES]

Connection socket for headphones

22 [USB MIDI]

Connection socket for an external MIDI device with USB port

23 [MIDI OUT | IN]

Connection sockets for an external MIDI device

24 [OUTPUT R | L / MONO]

Output for external audio devices

25 [TRIGGER IN – TOM 4]

[TRIGGER IN – CRASH2]

Connection sockets for tom 4 and crash 2

26 [AUX IN]

Input for external audio devices like MP3 or CD players

27 [9 V]

Connection socket for the power adapter

28 [USB MEMORY]

Connection for a USB memory device

29 Multi-pin socket (sub D) for connecting the pads (on the bottom of the device)

Connections and controls

MPS-850

11

6 Operating

6.1 Functions

Turning on / o

Check all cable connections for correct t before turning on

Before switching on, turn the [MASTER VOLUME] control to minimum.

Switch the drum module on or o with the main switch [POWER].

Automatic shuto

If the device is not in use, it shuts o automatically after a settable time.

To disable the automatic shutdown, use the Utility menu (

Ä

Chapter 6.10 ‘Utility menu’ on page 22).

Adjusting the volume

To set the volume, hit a pad while slowly turning the [MASTER VOLUME] control clockwise.

Reset to factory defaults

To reset the entire drum module to factory settings, turn it o rst. Then hold down the [<] and [>] simultaneously and addition‐

ally press [POWER] until the display shows ‘Factory Resetting…’ .

6.2 Selecting and adjusting drum kits

A drum kit is a compilation in which a certain sound (Voice) and several sound parameters are assigned to each pad. Selecting

dierent drum kits lets you customise the sound of your drum kit in seconds to the desired music genre. Besides the 30 preprog‐

rammed drum kits you can also create, customise and save 20 user drum kits.

Selecting a drum kit

To select a certain drum kit, proceed as follows:

1. Press [KIT].

ð

The display shows the kit list.

2. Use the arrow buttons ([<] / [>]) or the jog wheel to select the desired kit.

The setting is automatically stored.

Operating

e-drum module

12

Assigning a Voice

To programme a certain Voice for a pad, proceed as follows:

1. Press [KIT].

ð

The display shows the kit list.

2.

Press [MENU]. Use the arrow buttons ( / ) to select the option ‘VOICE’ and press [ENTER].

ð

The display shows the voice list.

3. Hit the respective pad to activate it.

ð

The display shows the name of the currently assigned voice.

4. Use the arrow buttons ([<] / [>]) or the jog wheel to select the desired voice.

The setting is automatically stored.

6.3 Playing the drum kit

Using the black plastic side of the bass drum beater will considerably maximize the lifetime of the mesh head of the bass drum pad.

Using the felt side will accelerate the abrasion of the mesh head and may cause the break.

The bass drum beater can be rotated by 180 degrees by loosening the locking screw.

Like on an acoustic drum kit, the pads respond to

dierent playing techniques and dynamics. All pads are velocity sensitive. Some

voices change their timbre depending on the punch used.

n Drums

With the snare drum we distinguish between Head and Rimshot.

– Head

Strike the head only.

– Rimshot

Simultaneously strike the head and the rim or only the rim of the pad.

n Cymbals

We distinguish the following cymbal zones:

– Bow

Play in the area between the edge and the bell of the cymbal.

– Bell

Play the bell area of the cymbal.

– Edge

Play at the edge of the cymbal.

– Choke

Choke Play is possible with Crash and Ride cymbals but not with the Hi-hat. To do so, stop the sound of the Crash and

Ride cymbals with the hand at the edge of the cymbal immediately after hitting it.

Operating

MPS-850

13

n Hi-hat

With the Hi-hat we distinguish between Hi-hat pedal change, open Hi-Hat, closed Hi-hat, Hi-hat pedal and Splash.

– Hi-hat pedal change

When the pedal is pressed in dierent positions, the voice changes when hitting the Hi-hat pad (similar to an acoustic

drum kit).

– Open Hi-hat

Strike the Hi-hat pad without pressing the pedal.

– Closed Hi-hat

Strike the Hi-hat pad with fully pressed pedal.

– Hi-Hat pedal

Press the Hi-hat controller pedal to generate a closed sound without striking the Hi-hat pad.

– Splash

Play the Hi-hat with fully pressed pedal and then open it suddenly.

6.4 Modifying drum kits

Selecting a drum kit

1. Press [KIT].

ð

The display shows the kit list.

2. Press [KIT] again to go to the User Kits section.

Customising a drum kit

You can assign a special sound to each individual trigger of the drum kit and set multiple sound parameters.

1. Select the desired drum kit with the arrow buttons ([<] / [>]). The selected drum kit is immediately active.

2.

Use the arrow buttons ( / ) to select the parameter to be changed.

3. Use the arrow buttons ([<] / [>]) or the jog wheel to change the parameter value.

Parameter, display Meaning Value range

KIT NAME Drum kit selection Preset: 1 … 30

User: 31 … 50

VOLUME Volume of the pads of the drum kit 0 … 16

EQ HIGH Boost / cut of the high EQ frequencies –12 dB…12 dB

EQ MID Boost / cut of the mid EQ frequencies –12 dB…12 dB

EQ LOW Boost / cut of the low EQ frequencies –12 dB…12 dB

Operating

e-drum module

14

Customising Voice parameters

Voice parameters always refer only to a single pad. For example, if you change the volume of the snare drum, the other pads are

not aected.

1. Press [KIT].

ð

The display shows the kit list.

2.

Press [MENU]. Use the arrow buttons ( / ) to select the option ‘VOICE’ and press [ENTER].

ð

The display shows the voice list.

3. Use the arrow buttons ([<] / [>]) or the jog wheel to select the pad or play the pad whose parameters you want to adjust.

4.

Use the arrow buttons ( / ) to select the parameter to be changed.

5. Use the arrow buttons ([<] / [>]) or the jog wheel to change the parameter value.

Parameter, display Meaning Value range

TRIGGER Trigger KICK, SNARE, SN-R, TOM1, T1-R…

VOICE NAME Voice assigned to the trigger. The voices U01…

U99 can be loaded from a USB stick.

1 … 550, U01…U99

VOLUME Volume 0…16

PAN Trigger position within the stereo signal (pan‐

orama right / left)

–8…8

PITCH Pitch –8…8

REVERB Reverb 0…16

DECAY Decay –5…0

PAD SONG Pattern, Style 1 … 100, O

Customising and storing user kits

The existing preset kits can be used as a basis for user kits. The user kits can then be stored in the device memory.

1. Press [SAVE].

ð

‘Rename Kit’ and the number and name of the rst user kit appear on the display.

2. Change the name as desired. You change the letter on which the cursor is currently located with the jog wheel, you move

the cursor with the arrow keys ([<] / [>]).

3. To save, select the option ‘SAVE’ . To cancel, select the option ‘CANCEL’ .

4. Use the arrow buttons ([<] / [>]) or the jog wheel to select a user kit. Press [ENTER].

ð

The display briey shows ‘SAVE OK!’ . The changes to the settings take immediately eect.

Operating

MPS-850

15

Any unsaved changes will be discarded when selecting another kit or the device is turned o.

6.5 Playing, customising and accompanying songs

Style selection

Your digital drum module features a total of 100 preprogrammed songs with dierent styles: 70 patterns, 6 hits, 24 taps and 2

user songs. You can play the songs and accompany them on the drum module. A song contains a drum part (containing the

rhythm in which you play the pads) and an accompaniment part (percussion and melody). The volume of both parts can be

adjusted separately.

1. Press [SONG].

ð

The name and number of the current song appear in the display.

2.

Use the arrow buttons ( / ) to select the parameter to be changed.

3. Use the arrow buttons ([<] / [>]) to change the parameter value.

4.

Press to play and stop the songs.

Parameter, display Meaning Value range

NUMBER Number of the song.

n 1…60: Patterns

n 61…70: Percussion Loops

n 71…76: Hits

n 77…100: Taps

n 101…102: User songs

ACCOM VOL Accompaniment volume 0…16

DRUM VOL Drum kit volume 0…16

Operating

e-drum module

16

Song playback from USB stick

The drum module rst displays the music les recognized in the ‘SONG’ directory on the USB stick. But you can switch to any

other directory on the medium. From each directory, the rst 99 music les are displayed.

Requirements for the music les:

n MIDI: SMF 0, track number less than 16, PPQN 480 maximum, le size 128 kB maximum.

n WAV: Bit rate 1536 kbit/s maximum, sampling frequency 48 kHz maximum

n MP3: Bit rate 320 kbit/s maximum, sampling frequency 48 kHz maximum

If you want to play music les that do not meet these requirements, an error message will appear in the display.

1. Press [SONG].

ð

The name and number of the current song appear in the display.

2. Press [SONG] again.

ð

The display shows the list of WAV, MP3 or MIDI les detected on the USB stick.

3.

Use the arrow buttons ( / /[<] / [>]) to navigate in the list.

4. Press [MENU] to open the ‘SONG’ menu.

Use the arrow buttons ( / ) to select the option ‘USB FOLDER’ to change to another directory on the USB stick. Conrm

with [ENTER].

5.

Press to play and stop the songs.

6.6 Metronome function

Press [CLICK] to turn the click function on and o again. When the Click is running the indicator LED of the button is ashing.

Settings

1.

Use the arrow buttons ( / ) to select the parameter to be changed.

2. Use the arrow buttons ([<] / [>]) or the jog wheel to change the parameter value.

All changes are immediately eective. Exit the Settings menu by pressing [CLICK] again.

Parameter, display Meaning Value range

TIME SIGNATURE Emphasis on beats 0 … 9/2, 0 … 9/4, 0 … 9/8, 0 … 9/16

VOLUME Click volume 0 … 16

INTERVAL Beats per measure 1/2, 3/8, 1/4, 1/8, 1/12, 1/16

NAME Name and number of the corresponding Click

voice

METRO, CLAVES, STICKS, COWBELL, CLICK, VOICE

OUTPUT Click output for headphones only or also for the

line output

PHONES, ALL (PHONES+OUTPUT)

The click volume is also inuenced by the fader [RIDE/CLICK]. The click is only audible if this fader is not set to zero.

Operating

MPS-850

17

Changing the tempo

1. Press [TEMPO].

2. Use the arrow buttons ([<] / [>]) or the jog wheel to change the click tempo.

3. Conrm with [ENTER] or wait three seconds to reactivate the originally set tempo.

6.7 Fader

The drum module oers six separate faders that can be used to directly adjust the volume of individual pads, the song, or the

click. The faders have double assignment. To change from one assignment to another, press [FADER]. The two control LEDs next

to the faders indicate which assignment is currently set.

Fader label Assignment 1 Assignment 2

[KICK] Kick drum –

[SNARE] Snare –

[TOM] Tom 1, 2, 3, 4 –

[HI-HAT] Hi-hat Drum module

[CRASH] Crash 1, 2 Accompaniment

[RIDE/CLICK] Ride Click

6.8 Recording functions

This feature allows you to use the drum module for recording. You can record your own drum track with or without an accompa‐

nying song. The recording can be stored in one of the two user songs as a MIDI le directly in the drum module or stored in an

MP3 le on a USB stick.

Recording preparation

1. Before recording, set the parameters as desired: Tempo, kit, emphasis on beats, beats per measure and song as accompani‐

ment.

2.

Press .

ð

The display shows ‘REC’ .

3. If no USB stick is connected, you can use the arrow buttons ([<] / [>]) to choose whether to save the recording as user song

1 or 2.

Operating

e-drum module

18

Starting and stopping recording

1.

When the unit is ready to record ‘REC’ ), press or play a pad.

From the ‘SONG’ and ‘KIT’ menus, you can switch to recording standby directly. To do so, just press .

ð

As long as the recording is running, the control LED of the

button lights up, the display shows ‘RECORDING’ .

2.

To stop recording, press .

Operating

MPS-850

19

6.9 Trigger settings

Adjusting trigger settings

The touch responsiveness can be adjusted to your needs and preferences by the settings of this menu.

1. Press [KIT].

ð

The display shows the kit list.

2.

Press [MENU]. Use the arrow buttons ( / ) to select the option ‘TRIGGER’ and press [ENTER].

ð

The display shows the list of trigger parameters.

3.

Use the arrow buttons ( / ) to select the parameter to be changed.

4. Strike the pad whose parameter you want to modify.

5.

For non-changeable parameters, the display shows ‘–’

Use the arrow buttons ([<] / [>]) or the jog wheel to change the parameter value. Please note the information in the table

below.

Operating

e-drum module

20

Page is loading ...

Millenium MPS-850 E-Drum Set, MPS-850 User manual

Related papers

Other documents

Mil­lenium MPS-850 E-Drum Set, MPS-850 User manual

Related papers

Other documents

Millenium MPS-850 E-Drum Set, MPS-850 User manual