Mitsubishi Electric CC-Link UNIT MR-J2S-T01 Installation guide

Mitsubishi Electric
Brand
Mitsubishi Electric
Model
CC-Link UNIT MR-J2S-T01
Type
Installation guide
CC-Link UNIT
MR-J2S-T01
Installation Guide
B
MITSUBISHI ELECTRIC CORPORATION
HEAD OFFICE: TOKYO BLDG MARUNOUCHI TOKYO 100-8310
This installation guide uses recycled paper.
IB(NA)0300048-B(1104)MEE Printed in Japan Specifications are subject to change without notice. Created April, 2011
General-Purpose AC Servo
1. SPECIFICATIONS
Item
Type
MR-J2S-T01
Applicable CPU card QnA(H), QnAS(H), A1S, A1SH, AnUS(H), AnN, AnA, AnU(H)
Communication speed 10M/5M/2.5M/625k/156kbps
Communication system Broadcast polling system
Synchronization system Frame synchronization system
Transmission path format Bus format (conforming to EIA RS485)
Transmission format Conforming to HDLC
Remote station number 1 to 64
Communication speed 156k to 10Mbps
Overall distance 1200 to 50m (3934.426 to 163.934ft.)
Between master/local
station and preceding/
subsequent station
2m (6.557ft.) or more
(Note) Max.
transmission
distance
Distance
between
stations
Between remote I/O
stations/remote device
stations
30cm (0.984ft.) or more (depends on communication speed)
Error control system CRC
PLC side master station
Connection cable Twisted pair cable (3-wire type)
Number of servo amplifiers connected
Up to 42 amplifiers only as remote device station
(when 1 station is occupied per amplifier),
(up to 32 amplifiers when 2 stations are occupied per amplifier)
Can be shared with other device
[ ] 0 to 55 (non-freezing)
In operation
[
] 32 to 131 (non-freezing)
[ ] 20 to 65 (non-freezing)
Ambient temperature
In storage
[
] 4 to 149 (non-freezing)
In operation
Ambient humidity
In storage
90%RH or less (non-condensing)
Ambience
Indoors (no direct sunlight),
Free from corrosive gas, flammable gas, oil mist, dust and dirt
[m/s
2
] 5.9 or less
Environment
Vibration
[ft/s
2
] 19.4 or less
Mass 0.3kg (0.66lb)
Note. Depends on the cable used. For more information, refer to the CC-Link system master/local module user's manual.
156(6.14)
C
N
4
0
SD
RD
WD
C
N
3
0
1
2
S
W
1
2
3
R
S
W
C
N
1
0
6
135(5.32)70(2.76)
NAME
PLATE
2- 6(0.24)Mounting hole
25(0.98)
6
66
168(6.61)
(0.24)
(0.24)
(0.24)
Module screw
tightening torque
2.5[N m]
(354.0[oz in])
[Unit: mm(in)]
Mass: 0.3kg(0.66lb)
(0.24)
2. OUTLINE DRAWING
  • Page 1 1

Mitsubishi Electric CC-Link UNIT MR-J2S-T01 Installation guide

Mitsubishi Electric
Brand
Mitsubishi Electric
Model
CC-Link UNIT MR-J2S-T01
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents