KWorld KW-UB345-AM User manual

Type
User manual
1
PlusTV DMB-TH Hybrid Stick KW-UB345-AM
Installation Manual
Contents
V1.0
Chapter 1: PlusTV DMB-TH Hybrid Stick Hardware Installation.................................................................... 2
1.1 Package Contents .................................................................................................................................2
1.2 System Requirements...........................................................................................................................2
1.3 Hardware Installation...........................................................................................................................2
Chapter 2: PlusTV DMB-TH Hybrid Stick Quick Installation..........................................................................3
2.1 Driver Installation ................................................................................................................................4
2.2 TotalMedia Application Installation..................................................................................................... 6
2.3 Remote Control IR Installation ............................................................................................................ 8
Chapter 3PlusTV DMB-TH Hybrid Stick Uninstallation............................................................................10
Chapter 4 : FAQ............................................................................................................................................. 11
4.1 How to check if the driver has been installed successfully or not?.............................................. 11
4.2 How to check if the Remote Control can work fine?.................................................................... 11
4.3 How to use ArcSoft TotalMedia Help when I use the software functions?................................. 12
-2-
Chapter 1: PlusTV DMB-TH Hybrid Stick Hardware Installation
1.1 Package Contents
Unpack your PlusTV DMB-TH Hybrid Stick package and make sure that all items are included. The
following items should be included in your package:
z KW-UB345-AM Hybrid DMB-TH Dongle USB2.0
z DMB-TH Antenna
z Quick Start Guide
z Installation CD
z Remote control
z Multi-cable input (S-Video/CVBS/Audio input)
1.2 System Requirements
z Microsoft Windows XP Service Pack2/Vista
z P4 1.7MHz CPU or above for SDTV
P4 2.5GHz CPU or above for HDTV
z 512M RAM or above for SDTV
1024M RAM or above for HDTV
z VGA Card with at least 128MB Memory for SDTV
VGA Card with at least 256MB Memory for HDTV
z Sound Card or On Board Sound Chip
z One Free USB 2.0 Port (not compatible with USB1.1)
z CD-ROM Drive (For software installation)
z 2GB Free HD Space
z Microsoft Direct X 9.0 or above
Microsoft Media Player 9.0 or above
1.3 Hardware Installation
Follow the steps shown below for installation of your TV Stick and use the pictorial guide below for
peripheral connections.
1. Plug a cable for Analog, Digital cable TV reception into the TV connector on PlusTV DMB-TH Hybrid
Stick KW-UB345-AM.
2. Connect the PlusTV DMB-TH Hybrid Stick KW-UB345-AM hardware to your desktop PC or Notebook
using a USB2.0 port.
-3-
Chapter 2: PlusTV DMB-TH Hybrid Stick Quick Installation
The PlusTV DMB-TH Hybrid Stick KW-UB345-AM package comes with complete Windows software
utilities. These utilities can be found on the installation CD included in the package. Before installation, we
recommend that you exit all background programs. These include applications such as anti-virus software
and system monitoring applications.
1. Once you finish the hardware installation, restart
your system. A window labeled: “Found New
Hardware Wizard” will connect to Windows
Update to search software. Choose “No, not this
time” and click “Next: to run the utilities setup
included in the CD.
2. Click “Cancel”, we must install from CD to have
completed set up.
3. Insert the installation CD into the CD ROM
device. The autorun page will appear as the left
image. Please choose Quick Installation
Multimedia software and driver.
-4-
4. This is software license agreement, you are
agreeing this license please choose “Next” to
continue, if not please choose “Cancel”.
5. The Quick Installation provides you with two
choices to install. If you want to install device
driver and software utility completely, please
choose “Typical Installation”. Or if you want to
install them partially, please choose “Custom
Installation”. Finally click “Install” to continue.
2.1 Driver Installation
6. The InstallShield Wizard will guide you through
installation of driver. Click “Next” to continue.
-5-
7. Click “Install” to continue.
8. Click “Continue Anyway” to continue.
9. Click “Continue Anyway” to continue.
-6-
10. When the message as the one on the left image,
click “Finish” to end the installation.
2.2 TotalMedia Application Installation
11. Please choose setup language.
12. The InstallShield Wizard will guide you through
installation of TotalMedia application. Click
“Next” to continue.
-7-
13. Click Yesaccept all the terms of the
proceeding License Agreement to install
TotalMedia.
14. Please insert the CD license key and click
“Next”.
15. Please choose the destination folder where you
want to install the files. You can click “Browse
to change the destination folder. Finally click
Next” to go to next step.
16. Setup will add program icons to the Program
Folders list. You may type a new folder name, or
select one from the existing folders list. Click
Next” to start installing. Please wait while
installation in process.
-8-
17. When the message as the one on the left image,
click “Finish” to end the installation.
Note: For more detailed TotalMedia instruction,
please refer to the TotalMedia HELP.
18. Please choose setup language.
2.3 Remote Control IR Installation
19. The InstallShield Wizard will guide you through
installation of remote control IR. Click “Next” to
continue.
20. Please choose the destination folder where you
want to install the files. You can click “Browse
to change the destination folder. Finally click
Next” to go to next step.
-9-
21. When the message as the one on the left image,
click “Finish” to end the installation.
22. All the drivers have been installed successfully.
Please choose “Yes, I want to restart my
computer now” to restart your computer
(Recommend) and click “Finish” to end the
installation.
-10-
Chapter 3PlusTV DMB-TH Hybrid Stick Uninstallation
If you want to uninstall device driver and software,
Please to “Control Panel” and press the Add or
Remove Programs.
Note: You can also take another way to uninstall
device driver and software utility, please refer to
chapter 4 FAQ 3.
1. If you want to uninstall device driver and
software, please choose “Arcsoft TotalMedia 3.5”,
Drv” or “IRReceive”, and click the “Remove”
button to continue uninstall.
-11-
Chapter 4 : FAQ
4.1 How to check if the driver has been installed successfully or not?
Ans: Right click on “My Computer” on the desktop and choose “Properties”. Once in “Properties”
window, click on “Device Manager” in Hardware panel. Click on the plus icon of “Sound, video and
game controllers” to open the device list. See Fig. 1 below.
Fig. 1
4.2 How to check if the Remote Control can work fine?
Ans: 1) You have to check if the “Remote Control” utility is installed or not. Please refer to Fig. 2.
2) You have to check if the driver has been installed or not. See FAQ-2.
3) You can check if the “Remote Control” tray icon is loaded in the right-bottom of task bar.
See Fig.3. below.
Fig. 2 Fig.3
-12-
4.3 How to use ArcSoft TotalMedia Help when I use the software functions?
Ans: Click on “Arcsoft TotalMedia Help” on the right top of user-interface refers to Fig. 4.
Also can be click on the C:\ or D:\Program Files\ArcSoft\TotalMedia 3.5\TotalMedia.chm
See Fig. 5 below.
Fig. 4
Fig. 5
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

KWorld KW-UB345-AM User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI