In-Ear Bluetooth® Hands Free
User Manual
AR-3135
FUNCTIONS
1. Power on/off/hands-free
a. Hold for 3 seconds to power on/off headset. To enter
pairing mode, keep pressing the button after
headset is turned on.
b. When headset is playing music the button to
receive or reject calls is disabled.
c. Press to receive or reject phone calls. Press
twice continuously to dial last phone call.
d. When headset is in charging mode, pick up it
to receive phone call.
2.
Under pairing mode, the red and blue LED ‘s
will blink alternately. The blue LED turns solid
after successful pairing.
a. In charging mode, the red LED light will turn
on. Once fully charged, the red LED will turn
off.
b. When the vehicle starts, the headset will
start pairing automatically. When the vehicle
stops, the headset turns off automatically
after 5 min if not paired with any device.
3. Microphone
4. Silica gel earphone bud
5. USB charging connectors
6. Cathode
7. Anode
OPERATION
Plug into lighter connector of car, this charges the headset. While plugged into the lighter
socket you are able to plug in USB charging cables to charge other devices, such as
smartphones, tablet PC’s, headphones or speakers etc.
WARNING
Please make sure that voltage of device to be charged is lower than AR3135, or it
may destroy the device.
Dismantling the device is prohibited.
Keep away from humidity and water.
SPECIFICATIONS
Bluetooth®
CSR V4.0
Battery
30mAh Polymer Battery
Charger Input
DC 12V-24V
Charger Output
5V/1A (Max. 1.5A)
5V/2.1A (Max. 2.1A)
DISTRIBUTED BY:
TechBrands by Electus Distribution Pty. Ltd.
320 Victoria Rd, Rydalmere
NSW 2116 Australia
Ph: 1300 738 555
Int’l: +61 2 8832 3200
Fax: 1300 738 500
www.techbrands.com
Made in China
/
