Sioux Chief 550-20E Installation guide

Position tube or conduit into base of TouchDown

clamp.

Ratchet bridge of TouchDown clamp down over

both posts evenly.

Slide TouchDown clamps to desired location

within the bracket.

Locate holes on bracket and secure bracket to

⅜" threaded rod using washers and ⅜" nuts. If

desired, hardware can be installed both above

and below bracket. Install double nut if specied.

Power Bar Mini Strut

™

Installation Guide

1 2

Additional TouchDown clamps can be purchased

in bulk and added to the bracket before installing

threaded rod. Ideal when running exible gas

lines.

522-5501

550-20

For larger pipe sizes or when insulation is

required, use the TouchDown II clamp (purchase

separately) and install on the bracket with the

screws provided.

#IS-523-2MS

Power Bar Mini Strut

™

Installation Guide

523-2MS 523-2MS2

523-2MS3 523-2MS4

This manual is also suitable for

Download PDF