Infinity iS-100 User manual

Category
Stroboscopes & disco lights
Type
User manual
Infinity iS-100
Highlite International B.V. Vestastraat 2 6468 EX Kerkrade the Netherlands
Ordercode: 41500
MANUAL
ENGLISH
1
Ordercode: 41500
Infinity iS-100
Table of contents
Warning ............................................................................................................................................................................... 2
Safety Instructions ......................................................................................................................................................... 2
Operating Determinations .......................................................................................................................................... 4
Rigging ............................................................................................................................................................................ 4
Return Procedure .......................................................................................................................................................... 6
Claims .............................................................................................................................................................................. 6
Description of the device ................................................................................................................................................. 7
Overview ........................................................................................................................................................................ 8
Backside ......................................................................................................................................................................... 8
Installation ........................................................................................................................................................................... 9
Set Up and Operation ....................................................................................................................................................... 9
Control Modes ............................................................................................................................................................... 9
One Infinity (Built-in Programs)................................................................................................................................. 9
Multiple Infinity’s (Master/Slave control) ............................................................................................................... 9
Multiple Infinity’s (DMX Control) ............................................................................................................................10
Fixture Linking ...............................................................................................................................................................11
Data Cabling ...............................................................................................................................................................11
Control Panel ...............................................................................................................................................................12
Control Mode ..............................................................................................................................................................12
DMX Addressing ..........................................................................................................................................................12
Menu Overview ...........................................................................................................................................................13
Main Menu Options .................................................................................................................................................14
1. DMX Addressing ...................................................................................................................................................14
2. Edit Mode ..............................................................................................................................................................15
3. Settings Menu .......................................................................................................................................................15
4. Built-in Programs ...................................................................................................................................................16
5. Test Menu ..............................................................................................................................................................17
6. Information Menu ................................................................................................................................................18
DMX Channels .............................................................................................................................................................19
19 Channels (Advanced).......................................................................................................................................19
16 Channels (Basic) .................................................................................................................................................24
Channel settings .........................................................................................................................................................26
Maintenance ....................................................................................................................................................................27
Replacing a Fuse ........................................................................................................................................................27
Replacing a Gobo from the rotating Gobowheel ...............................................................................................27
Battery Replacement .................................................................................................................................................30
Troubleshooting ...............................................................................................................................................................31
Product Specification .....................................................................................................................................................33
2
Ordercode: 41500
Infinity iS-100
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
Showtec Infinity iS-100 LED Spot with Powercon powercable 0,9m
2 brackets for truss mounting (spare part number SPCI150)
Safety eye
User manual
LED Expected Lifespan
LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration
of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal or singular
optimum conditions. For this reason when all color LEDs are used at their fullest intensity, life of the LEDs is
significantly reduced. If improving your lifespan expectancy is of a higher priority, place care in providing
for lower operational temperatures. This may include climatic-environmental and the reduction of overall
projection intensity
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
be qualified
follow the instructions of this manual
Before your initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
3
Ordercode: 41500
Infinity iS-100
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-
observance of this manual or any unauthorized modification to the device.
Never let the power-cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution!
Never remove warning or informative labels from the unit.
Never use anything to cover the ground contact.
Never lift the fixture by holding it at the projector-head, as the mechanics may be damaged. Always
hold the fixture at the transport handles.
Never place any material over the lens.
Never look directly into the light source.
Never leave any cables lying around.
Never unscrew the screws of the rotating gobo, as the ball bearing will otherwise be opened.
Do not insert objects into air vents.
Do not connect this device to a dimmerpack.
Do not switch the device on and off in short intervals, as this would reduce the device’s life.
Do not touch the device’s housing bare-handed during its operation (housing becomes very hot).
Allow the fixture to cool for at least 5 minutes before handling.
Do not shake the device. Avoid brute force when installing or operating the device.
Only use device indoor, avoid contact with water or other liquids.
Only operate the fixture after having checked that the housing is firmly closed and all screws are
tightly fastened.
Only operate the device after having familiarized with its functions.
Avoid flames and do not put close to flammable liquids or gases.
Always keep case closed while operating.
Always allow free air space of at least 50 cm around the unit for ventilation.
Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power-cord by the plug. Never pull out the plug by tugging the power-cord.
Make sure that the device is not exposed to extreme heat, moisture or dust.
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power-cord is never crimped or damaged. Check the device and the power-
cord from time to time.
If the lens is obviously damaged, it has to be replaced. So that its functions are not impaired, due to
cracks or deep scratches.
If device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
For adult use only. Movinghead must be installed out of the reach of children. Never leave the unit
running unattended.
Never attempt to bypass the thermostatic switch or fuses.
For replacement use fuses of same type and rating only.
The user is responsible for correct positioning and operating of the Infinity. The manufacturer will not
accept liability for damages caused by the misuse or incorrect installation of this device.
This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
During the initial start-up some smoke or smell may arise. This is a normal process and does not
necessarily mean that the device is defective.
Repairs, servicing and electric connection must be carried out by a qualified technician.
WARRANTY: Till one year after date of purchase.
4
Ordercode: 41500
Infinity iS-100
Operating Determinations
This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
The minimum distance between light-output and the illuminated surface must be more than 1 meter.
The maximum ambient temperature ta = 40°C must never be exceeded.
The relative humidity must not exceed 50 % with an ambient temperature of 40° C.
If this device is operated in any other way, than the one described in this manual, the product may
suffer damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all other
safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
If the projector is lowered from the ceiling or high joists, professional trussing systems have to be used.
Use a clamp to mount the projector, with the mounting-bracket, to the trussing system.
The projector must never be fixed swinging freely in the room.
The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety-cable.
When rigging, derigging or servicing the projector, always make sure, that the area below the
installation place is blocked and staying in the area is forbidden.
The Infinity can be placed on a flat stage floor or mounted to any kind of truss by a clamp.
5
Ordercode: 41500
Infinity iS-100
Mounting a clamp to the underside of the Infinity moving head
Improper installation can cause serious damage to people and property !
6
Ordercode: 41500
Infinity iS-100
Connection with the mains
Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
FASE
N
BLUE
BLACK
SILVER
NULL
YELLOW/GREEN
GREEN
GREEN
EARTH
Make sure that the device is always connected properly to the earth!
Improper installation can cause serious damage to people and property!
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.
Be prepared to provide the model number, serial number and a brief description of the cause for the
return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the
customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
01) Your name
02) Your address
03) Your phone number
04) A brief description of the symptoms
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any short-
comings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
otherwise agreed in writing.
Complaints against us must be made known in writing or by fax within 10 working days after receipt of the
invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement of which the obligation is resulting.
7
Ordercode: 41500
Infinity iS-100
Description of the device
Features
The Showtec Infinity iS-100 LED Spot is a moving-head with high output and great effects.
Covers with quick lock screws
Fast color & gobo changes due to high torque motors
On-Board: Battery powered full color display including gravity sensor
Quick lock screws on the covers allow you to change gobos within minutes without the need of any
special tools
LED source the shutter is electronic not mechanical.
On-Board: 16x2 Character display
Gobo inner diameter: 23mm, Gobo outer diameter: 27mm
DMX-control via standard DMX-controller
User-selectable Pan & Tilt ranges, 540° / 360° / 180°
Reverse Pan / Tilt movement
Special: Pan / Tilt movement, Color, Gobo blackout
Pan 0º -- 540º, Tilt-- 270º
Pan/Tilt resolution: 16 bit
Control: DMX-512, Master/Slave, Built-in Programs
10 Built in programs selectable by DMX
Light Source: 100W White LED
Gobowheel 1: Rotating Gobowheel with 2 glass + 5 metal gobos (Interchangeable)
Gobowheel 2: Static Gobowheel with 8 metal gobos
Gobo functions: Gobo-flow effect, Gobo shake
Colorwheel 1: 8 dichroic-filters and white
Color functions: Split colors, Rainbow-flow effect
Rotation: Bi-directional
Prism: 3-facet prisml
Output: 52.400 Lux @ 1m.
Beam Angle: 15°
Input Voltage: 100-240 VAC
Continuous Power 220W max. at full output
Dimmer: 0-100%
Strobe: 0-20Hz
Focus: Motorized focus
Variable motorized Iris (2-100%)
Housing: Black Metal & Flame-retardant plastic
Fixture Connection: XLR Data in/out (XLR 3-pin) and XLR Data in/out (XLR 5-pin)
Neutrik Powercon IN / OUT
Fuse F5AL / 250V
Dimensions: 304 x 366 x 485 mm (LxWxH)
Weight: 16,5 kg
User selectable Basic (16CH) or Advanced (19CH) operating modes
8
Ordercode: 41500
Infinity iS-100
Overview
Fig. 01
01) Lens
02) Menu Buttons + LCD Display
Backside
Fig. 02
03) DMX signal connector (IN) 5-pin
04) DMX signal connector (OUT) 5-pin
05) DMX signal connector (IN) 3-pin
06) DMX signal connector (OUT) 3-pin
07) Neutrik Powercon IN
08) Neutrik Powercon OUT
09) ON/OFF
10) Fuse F5AL 250V
NOTE: Knowledge of DMX is required to fully utilize this unit.
9
Ordercode: 41500
Infinity iS-100
Installation
Remove all packing materials from the Infinity iS-100 LED Spot. Check that all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Control Modes
There are 3 modes:
Stand-alone (built-in programs)
Master/Slave
DMX512 (19 Channels ADVANCED or 16 channel BASIC)
One Infinity (Built-in Programs)
01) Fasten the effect light onto firm trussing. Leave at least 1 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) When the Infinity is not connected by a DMX-cable, it functions as a stand-alone device.
05) Please see page 16 for more information about the built-in programs.
Multiple Infinity’s (Master/Slave control)
01) Fasten the effect light onto firm trussing. Leave at least 1 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) Use a 3-p XLR cable to connect the Infinity.
The pins:
1. Earth
2. Signal (-)
3. Signal (+)
05) Link the units as shown in (Fig. 3), Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second, third, and fourth units. You can
use the same functions on the master device as described on page 15 (Built-in Programs or Music
control)). This means on the master device you can set your desired operation Mode and all slave
devices will react the same as the master device.
Multiple Infinity’s (Master/Slave control)
Fig. 03
10
Ordercode: 41500
Infinity iS-100
Multiple Infinity’s (DMX Control)
01) Fasten the effect light onto firm trussing. Leave at least 1 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) Use a 3-p XLR cable to connect the Infinity’s and other devices.
05) Link the units as shown in (figure 4), Connect a DMX signal cable from the first unit's DMX "out" socket
to the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.
06) Supply electric power: Plug electric mains power cords into each unit's IEC socket, then plug the
other end of the mains power cord into proper electric power supply sockets, starting with the first
unit. Do not supply power before the whole system is set up and connected properly.
Multiple Infinity’s DMX Set Up
Fig. 04
Note : Link all cables before connecting electric power
11
Ordercode: 41500
Infinity iS-100
Fixture Linking
You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to
run synchronized shows on two or more fixtures set to a master/slave operating mode. The combined
number of channels required by all the fixtures on a serial data link determines the number of fixtures the
data link can support.
Important:
Fixtures on a serial data link must be daisy chained in one single line. To comply with the
EIA-485 standard no more than 30 devices should be connected on one data link.
Connecting more than 30 fixtures on one serial data link without the use of a DMX optically
isolated splitter may result in deterioration of the digital DMX signal.
Maximum recommended DMX data link distance: 100 meters
Maximum recommended number of Infinity’s on a DMX data link: 30 fixtures
Data Cabling
To link fixtures together you must obtain data cables. You can purchase DAP Audio certified DMX cables
directly from a dealer/distributor or construct your own cable. If you choose to create your own cable
please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic
interference.
DAP Audio Certified DMX Data Cables
DAP Audio cable for allround use. bal. XLR/M 3 p. > XLR/F 3 p.
Ordercode FL01150 (1,5m.), FL013 (3m.), FL016 (6m.), FL0110 (10m.), FL0115 (15m.), FL0120 (20m.).
DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL71150 (1,5m.), FL713 (3m.), FL716 (6m.), FL7110 (10m.).
The Infinity iS-200 LED Spot can be operated with a controller in control mode or without the controller in
stand-alone mode.
12
Ordercode: 41500
Infinity iS-100
Control Panel
A)
B)
C)
D)
E)
F)
G)
H)
I)
J)
K)
Home button
Edit Menu button
Settings Mode Button
Address Setting Button
Infinity Logo Button
Up Button
Down Button
OK/ENTER
Left Button
Right Button
LCD Display
Fig. 05
Control Mode
The fixtures are individually addressed on a data-link and connected to the controller.
The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it,
the controller will display the saved DMX address the next time.)
DMX Addressing
The control panel on the front side of the base allows you to assign the DMX fixture address, which is the
first channel from which the Infinity will respond to the controller.
Please note when you use the controller, the unit has 19 channels.
When using multiple Infinity’s, make sure you set the DMX addresses right.
Therefore, the DMX address of the first Infinity’s should be 1(001); the DMX address of the second Infinity
should be 1+19=20 (020); the DMX address of the third Infinity should be 20+19=39 (039), etc.
Please, be sure that you don’t have any overlapping channels in order to control each Infinity correctly.
If two or more Infinity’s are addressed similarly, they will work similarly.
For address settings, please refer to the instructions under ”Addressing’.
Controlling:
After having addressed all Infinity fixtures, you may now start operating these via your lighting controller.
Note: After switching on, the Infinity will automatically detect whether DMX 512 data is received or not. If
there is no data received at the DMX-input, the “LED“ on the control panel will not flash.
The problem may be:
The XLR cable from the controller is not connected with the input of the Infinity.
The controller is switched off or defective, the cable or connector is detective, or the signal wires
are swapped in the input connector.
Note: It’s necessary to insert a XLR termination plug (with 120 Ohm) in the last fixture in order to ensure
proper transmission on the DMX data link.
13
Ordercode: 41500
Infinity iS-100
Menu Overview
14
Ordercode: 41500
Infinity iS-100
Main Menu Options
DMX address
Edit Mode
Settings Menu
Built-in Programs
Test Mode
Info
Home
Up
Edit Menu
Down
Setting Mode
OK
Address Setting
Left
Infinity Logo
Right
1. DMX Addressing
With this menu you can set the DMX address.
01) Press the button and select .
02) Press the button, to confirm. You can choose 512 different DMX addresses.
Use the Left /Right / Up / Down buttons to select the required address from .
03) Once you have set the desired DMX address, press the button to store your DMX address.
15
Ordercode: 41500
Infinity iS-100
2. Edit Mode
With this menu you can set your desired mode.
01) Press the button and select .
02) Press the button, to confirm. You can choose 3 different modes.
Use the Up / Down buttons to select the required mode:
03) Once you have selected the desired mode, press the buttons to change the value from
No to YES.
04) Once you have selected the desired setting, press the button to store your settings.
05) If the device has been set to master, all slave devices will follow the master movement.
06) If the device has been set to slave, it will react the same as its master device.
3. Settings Menu
With this menu you can set your desired mode.
01) Press the button and select .
02) Press the button, to confirm. You can choose 11 different modes.
Use the Up / Down buttons to select the required mode:
03) Once you have selected the desired mode, press the buttons to change the value from
No to YES.
04) If you press the OK button at the Reset function, a new Menu will open.
05) You can set 6 different reset options.
06) Once you have selected the desired setting, press the button to store your settings.
16
Ordercode: 41500
Infinity iS-100
4. Built-in Programs
With this menu you can set your desired mode.
01) Press the button and select .
02) Press the button, to confirm. You can choose 10 different modes.
Use the Up / Down buttons to select the required mode:
03) Once you have selected the desired mode, press the buttons to change the value from
No to YES.
04) Once you have selected the desired setting, press the button to store your settings.
17
Ordercode: 41500
Infinity iS-100
5. Test Menu
With this menu you can set your desired mode.
01) Press the button and select .
02) Press the button, to confirm. You can choose 2 different modes.
Use the Up / Down buttons to select the required mode:
03) Once you have selected the desired mode, press the buttons to change the value from
No to YES.
04) If you press the OK button at the Reset function, a new Menu will open.
05) You can set 19 different Test options.
06) Once you have selected the desired setting, press the button to store your settings.
18
Ordercode: 41500
Infinity iS-100
6. Information Menu
With this menu you can set your desired mode.
01) Press the button and select .
02) Press the button, to confirm.
03) You can only view 4 current settings, you cannot change anything
19
Ordercode: 41500
Infinity iS-100
DMX Channels
19 Channels (Advanced)
Channel 1 Horizontal movement (Pan)
Push the slider up, in order to move head horizontally (PAN).
Gradual head adjustment from one end of the slider to the other (0-255, 128-center).
The head can be turned by 540° and stopped at any position you wish.
Channel 2 Vertical movement (Tilt)
Push the slider, up in order to move head vertically (TILT).
Gradual head adjustment from one end of the slider to the other (0-255, 128-center).
The head can be turned by 270° and stopped at any position you wish.
Channel 3 Pan fine 16 bit
Channel 4 Tilt fine 16 bit
Channel 5 PAN/TILT Speed
0-255
From Max Speed (0) to Min. Speed (255)
Channel 6 Dimmer intensity (Shutter must be open )
0-255
From black to brightest
Channel 7 Dimmer Fine (Shutter must be open )
0-255
From black to brightest
Channel 8 Shutter / Strobe (Dimmer must be open )
0-3
Close
4-7
Shutter open
8-76
Strobe effect, from slow to fast (0-10 flashes/sec.)
77-145
Pulse Strobe effect, from slow to fast (0-10 flashes/sec.)
146-215
Random Shutter
216-255
Shutter open
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Infinity iS-100 User manual

Category
Stroboscopes & disco lights
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI