Kustom KUA 10 Owner's manual

Compact, portable Ukulele amplifier with shoulder strap

Ukulele Transducer Pickup

10 Watts - 1 x 6” Kustom design speaker

Guitar & Ukulele inputs

Volume & Tone control

Aux. input listen/jam along to music

Headphone output for silent operation

Operates on 9-12VDC adapter (included)

or 6 - "AA" batteries (not included)

The Ukulele transducer pickup is simple to install to

your instrument. Simply peel oﬀ the adhesive backing

and mount the pickup to the face of your instrument.

( No special tools required ). Once installed you can

amplify your Ukulele through the amplifier.

Battery Powered Guitar & Ukulele Amplifier

1 Guitar Input: Use this ¼” input to plug in your guitar.

Ukulele Input: Use this 1/8” jack to plug in your Ukulele.

Aux. Input: This is a 3.5mm stereo line input. It bypasses the tone controls and feeds straight

into the power amplifier. Use the volume and tone controls on your external device to control

the audio signal.

Tone: Set fully left to increase bass response.Set fully right to enhance treble notes.Set at 12

o’clock for a balanced tone.

Volume: Sets the overall volume of the amplifier.

Headphone: This is a 3.5mm stereo output jack. When used, it turns off the internal speaker.

It combines all inputs from your guitar and Line In for silent practice.

*10 watts

6” Kustom Design

¼” Guitar & 3.5mm Ukulele

1 Volume & 1 Tone

This manual is also suitable for

Download PDF