Elima-Draft ELMDFT124FL4318 Operating instructions

Elima-Draft

ELMDFT124FL4318

Residential And Commercial HVAC Insulated Floor & Debris

Insert For 12 in. x 4 in. x 2 in. Ducts.

INSTALLIATION GUIDE

*Remove Floor Register Form DUCT Opening

* Insert ELMDFT124FL4318 into DUCT opening and push down. Make

Sure Insert is Flush With Top Of DUCT. Insert Will Conform With

DUCT Opening Insuring Tight Fit

*Replace Floor Register On DUCT Opening

*******************IMPORTANT********************

REMOVE THE ELMDFT124FL4318 BEFORE ACTIVIATING THE

HVAC SYSTEM