Elite Core EC-WBP-VC User manual

WIRED BODY PACK WITH VOLUME CONTROL

TO USE THIS DEVICE:

USER MANUAL

The Elite Core Wired Body Pack with for

Headphone Extension is an ultra-durable

3.5MM to XLR adapter that features a passive

volume control knob and a heavy-duty belt

clip for use with the EC-PRO-HEX 10' or 18'

headphone extension cable.

Insert an 3 Pin, XLR cable from your audio source into the 3 pin connector

on the bottom of the Body Pack.

Next, plug in your headphones or In Ear Monitors to the

3.5mm port located on the top of the unit.

Adjust the volume of the audio with the volume control located at the top of the unit.

NOTE: This is a PASSIVE extention body pack with a volume attenuator. This is not a headphone

amplification device. While it will function, using this product without a headphone amplifier will result

in a decreased volume level that may be too low for most applications.

Elite Core LLC 1191 Sturgis Road Conway, AR 72034 STE 300 855-276-2673

THIS IS NOT A HEADPHONE

AMPLIFICATION DEVICE.

IT IS A PASSIVE EXTENSION PACK WITH

A VOLUME ATTENUATOR.

XLR INPUT

BELT CLIP

VOLUME ATTENUATOR

3.5 MM INPUT