www.peavey.com
Invective™ 412
Cabinet
Specications
Featuring four premium 12” Celestion drivers and full stereo capability, the all new USA-made Peavey In-
vective™ 412 Cabinet is perfectly suited for use with the new Invective 120 Head. is cabinet was speci-
cally voiced to reproduce the most revered modern metal sounds ranging from woody and clean to the most
extreme high gain tones. Solid 3/4” (1” stock) ngerjointed pine construction, removable EDL casters, and
premium components throughout insure extreme road worthiness and reliability. e use of solid pine results
in the most responsive dynamics imaginable and the compliment of the metal-standard Celestion Vintage 30
paired (in an X pattern) with the new Creamback G12H-75 result in what many have already described as “the
best cabinet I’ve ever heard”. In STEREO mode, you get a le/right conguration rated at 8 Ohms per side at
over 120W(rms) per side. In MONO mode, it becomes a 16 Ohm cabinet capable of handling 240W(rms) of
Earth-shattering power.
Power Handling: Impedance:
240 Watts Mono Mono - 16 Ohms
120 Watts/channel Stereo Stereo - 8 Ohms per side
Transducer Compliment: Input Connections:
Two Celestion Vintage 30 (8 Ohms) 1/4” inputs with stereo/mono switch
Two Celestion Creamback G12H-75 (8 Ohms)
Weight - 94.36 lb
Dimensions - 31.5”W x 17.75”D x 34.75”H
Logo referenced in Directive 2002/96/EC Annex IV
(OJ(L)37/38,13.02.03 and defined in EN 50419: 2005
The bar is the symbol for marking of new waste and
is applied only to equipment manufactured after
www.peavey.com
Warranty registration and information for U.S. customers available online at
www.peavey.com/warranty
or use the QR tag below
Features and specications subject to change without notice.
Peavey Electronics Corporation 5022 Hartley Peavey Drive Meridian, MS 39305 (601) 483-5365 FAX (601) 486-1278
A