KYOCERA KM-3040 Operating instructions

Brand: KYOCERA

Model: KM-3040

Category: Copiers

Type: Operating instructions

This manual is also suitable for

Printing System(Y)

Operation Guide

Function Edition

iii

Guides Included

The following guides are included with this machine. Refer to the guide that corresponds

to your particular objective.

Operation Guide Printer Setup Edition

This guide contains instructions for assembling and installing the machine.

Operation Guide Printer Function Edition (this guide)

This guide contains explanations on printer functions as well as default settings and

troubleshooting.

Trademark Information

• PRESCRIBE and ECOSYS are registered trademarks of Kyocera Corporation. KPDL

and KIR are trademarks of Kyocera Corporation.

• Microsoft, Windows, and Windows NT are registered trademarks of Microsoft

Corporation. Microsoft Windows Server is a trademark of Microsoft Corporation.

• Macintosh, AppleTalk, and TrueType is a registered trademark of Apple Computer, Inc.

• PostScript is a registered trademark of Adobe Systems Incorporated.

• PCL is registered trademarks of Hewlett-Packard Company.

• Novell and NetWare are registered trademarks of Novell, Inc.

• Ethernet is a registered trademark of Xerox Corporation.

• PowerPC is a trademark of International Business Machines Corporation.

• CompactFlash is a trademarks of SanDisk Corporation.

• This product was developed using Tornado, the real-time operating system (ROTS)

general development environment from Wind River Systems, Inc.

• The Kyocera product uses PeerlessPrintXL to provide the HP LaserJet compatible

PCL6 language emulation. PeerlessPrintXL is a trademark of Peerless Systems

Corporation, 2381 Rosecrans Ave. El Segundo, CA 90245, U.S.A.

• This product contains UFST

and MicroType

from Monotype Imaging Inc.

All other company and product names contained in this Operation Guide are trademarks

or registered trademarks of their respective companies. The designations ™ and

will not

be used in this Operation Guide.

or by any means, electronic or mechanical, including photocopying, recording or by any

information storage and retrieval system, without permission in writing from the Publisher.

Legal Restriction On Copying

• It may be prohibited to copy copyrighted material without permission of the copyright

owner.

• It is prohibited under any circumstances to copy domestic or foreign currencies.

• Copying other items may be prohibited.

IBM Program License Agreement

THE DEVICE YOU HAVE PURCHASED CONTAINS ONE OR MORE SOFTWARE

PROGRAMS (“PROGRAMS”) WHICH BELONG TO INTERNATIONAL BUSINESS

MACHINES CORPORATION (“IBM”). THIS DOCUMENT DEFINES THE TERMS AND

CONDITIONS UNDER WHICH THE SOFTWARE IS BEING LICENSED TO YOU BY IBM.

IF YOU DO NOT AGREE WITH THE TERMS AND CONDITIONS OF THIS LICENSE,

THEN WITHIN 14 DAYS AFTER YOUR ACQUISITION OF THE DEVICE YOU MAY

RETURN THE DEVICE FOR A FULL REFUND. IF YOU DO NOT SO RETURN THE

DEVICE WITHIN THE 14 DAYS, THEN YOU WILL BE ASSUMED TO HAVE AGREED TO

THESE TERMS AND CONDITIONS.

The Programs are licensed not sold. IBM, or the applicable IBM country organization,

grants you a license for the Programs only in the country where you acquired the

Programs. You obtain no rights other than those granted you under this license.

The term “Programs” means the original and all whole or partial copies of it, including

modified copies or portions merged into other programs. IBM retains title to the Programs.

IBM owns, or has licensed from the owner, copyrights in the Programs.

1. License

Under this license, you may use the Programs only with the device on which they are

installed and transfer possession of the Programs and the device to another party. If you

transfer the Programs, you must transfer a copy of this license and any other

documentation to the other party. Your license is then terminated. The other party agrees

to these terms and conditions by its first use of the Program.

You may not:

1) use, copy, modify, merge, or transfer copies of the Program except as provided in this

license;

2) reverse assemble or reverse compile the Program; or

3) sublicense, rent, lease, or assign the Program.

2. Limited Warranty

The Programs are provided “AS IS.”

THERE ARE NO OTHER WARRANTIES COVERING THE PROGRAMS (OR

CONDITIONS), EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE.

Some jurisdictions do not allow the exclusion of implied warranties, so the above exclusion

may not apply to you.

SUPPLEMENT TO AGREEMENT FOR SOFTWARE BUNDLING AND DISTRIBUTION

FOR ALDC

3. Limitation of Remedies

IBM’s entire liability under this license is the following;

1) For any claim (including fundamental breach), in any form, related in any way to this

license, IBM’s liability will be for actual damages only and will be limited to the greater of;

a) the equivalent of U.S.$25,000 in your local currency; or

b) IBM’s then generally available license fee for the Program

This limitation will not apply to claims for bodily injury or damages to real or tangible

personal property for which IBM is legally liable. IBM will not be liable for any lost profits,

lost savings, or any incidental damages or other economic consequential damages, even

if IBM, or its authorized supplier, has been advised of the possibility of such damages. IBM

will not be liable for any damages claimed by you based on any third party claim. This

limitation of remedies also applies to any developer of Programs supplied to IBM. IBM's

and the developer's limitations of remedies are not cumulative. Such developer is an

intended beneficiary of this Section. Some jurisdictions do not allow these limitations or

exclusions, so they may not apply to you.

4. General

You may terminate your license at any time. IBM may terminate your license if you fail to

comply with the terms and conditions of this license. In either event, you must destroy all

your copies of the Program. You are responsible for payment of any taxes, including

personal property taxes, resulting from this license. Neither party may bring an action,

regardless of form, more than two years after the cause of action arose. If you acquired the

Program in the United States, this license is governed by the laws of the State of New York.

If you acquired the Program in Canada, this license is governed by the laws of the Province

of Ontario. Otherwise, this license is governed by the laws of the country in which you

acquired the Program.

Typeface Trademark Acknowledgement

All resident fonts in this printer are licensed from Monotype Imaging Inc.

Helvetica, Palatino and Times are registered trademarks of Linotype-Hell AG.

ITC Avant Garde Gothic, ITC Bookman, ITC ZapfChancery and ITC Zapf Dingbats are

registered trademarks of International Typeface Corporation.

Monotype Imaging License Agreement

1 “Software” shall mean the digitally encoded, machine readable, scalable outline data

as encoded in a special format as well as the UFST Software.

2 You agree to accept a non-exclusive license to use the Software to reproduce and

display weights, styles and versions of letters, numerals, characters and symbols

(“Typefaces”) solely for your own customary business or personal purposes at the

address stated on the registration card you return to Monotype Imaging. Under the

terms of this License Agreement, you have the right to use the Fonts on up to three

printers. If you need to have access to the fonts on more than three printers, you

need to acquire a multi-user license agreement which can be obtained from

Monotype Imaging. Monotype Imaging retains all rights, title and interest to the

Software and Typefaces and no rights are granted to you other than a License to use

the Software on the terms expressly set forth in this Agreement.

3 To protect proprietary rights of Monotype Imaging, you agree to maintain the

Software and other proprietary information concerning the Typefaces in strict

confidence and to establish reasonable procedures regulating access to and use of

the Software and Typefaces.

4 You agree not to duplicate or copy the Software or Typefaces, except that you may

make one backup copy. You agree that any such copy shall contain the same

proprietary notices as those appearing on the original.

5 This License shall continue until the last use of the Software and Typefaces, unless

sooner terminated. This License may be terminated by Monotype Imaging if you fail

to comply with the terms of this License and such failure is not remedied within thirty

(30) days after notice from Monotype Imaging. When this License expires or is

terminated, you shall either return to Monotype Imaging or destroy all copies of the

Software and Typefaces and documentation as requested.

6 You agree that you will not modify, alter, disassemble, decrypt, reverse engineer or

decompile the Software.

vii

7 Monotype Imaging warrants that for ninety (90) days after delivery, the Software will

perform in accordance with Monotype Imaging-published specifications, and the

diskette will be free from defects in material and workmanship. Monotype Imaging

does not warrant that the Software is free from all bugs, errors and omissions.

The parties agree that all other warranties, expressed or implied, including warranties

of fitness for a particular purpose and merchantability, are excluded.

8 Your exclusive remedy and the sole liability of Monotype Imaging in connection with

the Software and Typefaces is repair or replacement of defective parts, upon their

return to Monotype Imaging.

In no event will Monotype Imaging be liable for lost profits, lost data, or any other

incidental or consequential damages, or any damages caused by abuse or

misapplication of the Software and Typefaces.

9 Massachusetts U.S.A. law governs this Agreement.

10 You shall not sublicense, sell, lease, or otherwise transfer the Software and/or

Typefaces without the prior written consent of Monotype Imaging.

11 Use, duplication or disclosure by the Government is subject to restrictions as set

forth in the Rights in Technical Data and Computer Software clause at FAR 252-227-

7013, subdivision (b)(3)(ii) or subparagraph (c)(1)(ii), as appropriate. Further use,

duplication or disclosure is subject to restrictions applicable to restricted rights

software as set forth in FAR 52.227-19 (c)(2).

12 YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT,

UNDERSTAND IT, AND AGREE TO BE BOUND BY ITS TERMS AND

CONDITIONS. NEITHER PARTY SHALL BE BOUND BY ANY STATEMENT OR

REPRESENTATION NOT CONTAINED IN THIS AGREEMENT. NO CHANGE IN

THIS AGREEMENT IS EFFECTIVE UNLESS WRITTEN AND SIGNED BY

PROPERLY AUTHORIZED REPRESENTATIVES OF EACH PARTY.

viii

Conventions

This manual uses the following conventions:

Convention Description Example

Bracket Bold

Text Typeface

Used to emphasize the selection of

the operation panel key.

Press the [Print] key.

Bracket Text

Typeface

Used to emphasize the selection of

the touch panel key.

Press [Interface].

Italic Typeface Used to denote messages or names

displayed on the operation panel,

names of machine parts and for

references to additional information

and other publications.

Processing message is

displayed.

Notes Used to provide additional or useful

information about a function or

feature. Can also contain references

to other publications.

NOTE: You can set the

emulation for each interface.

Important Use to provide important information.

IMPORTANT: Formatting of the

memory card must be executed

from the printer.

Contents

1 Procedure for Making Settings

Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Menu Hierarchical Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

e-MPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Print Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

2 Selecting the Printer Settings

Status Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Understanding the Status Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Changing the Interface Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

Changing Network Interface Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

Emulation Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

Emulation Mode Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

KPDL (AUTO) Alternative Emulation Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

KPDL Error Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11

KC-GL Pen and Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11

Default Font . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

Selecting the Default Font . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

Changing the Default Font Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14

Character Pitch for Courier/Letter Gothic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15

Selecting Regular or Dark Courier/Letter Gothic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15

Setting the Code Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16

Printing Lists of Fonts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16

Print Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18

Number of Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18

Print Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19

Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19

Page Protect Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20

Line Feed (LF) Action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20

Carriage-Return (CR) Action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21

Setting Print Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-23

KIR Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-23

Eco Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24

Print Density Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24

Paper Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-26

MP Tray Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-26

Selecting the Paper Feed Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-27

Duplex Print Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-28

Output Destination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-28

Overriding Difference between A4 and Letter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-29

Operating the Storage Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-30

Using the Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-30

Using the RAM Disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-34

Using the Optional Hard Disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-36

e-MPS Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-38

Printing a Quick Copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-38

Using Proof-and-Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-39

Printing a Private Print/Job Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-40

Retrieving Jobs from Virtual Mailbox (VMB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-41

Printing a List of Virtual Mailbox (VMB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-42

Printing a List of Code Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-42

Changing e-MPS Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-43

Other Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-46

Automatic Form Feed Timeout Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-46

Resource Protect Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-47

Auto Error Clear Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-47

Finishing Error Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-48

Printing the Service Status Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-49

Restart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-50

Received Data Dump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-50

3 Troubleshooting

Basic troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Display message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Storage Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

RAM Disk Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Memory Card Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Hard Disk Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Pausing Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Canceling Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

Restart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

4 Options

5 Specifications

1-1

1 Procedure for Making Settings

This chapter explains how to use the operator panel to configure the printer function and

shows the hierarchy diagram of the menu selection.

Procedure

To enter the printing function, perform the following procedure.

Press the [Print] key. The machine enters the

printer mode.

Press [Printer Menu] or [e-MPS]. The

Printer Menu or e-MPS screen will

appear.

Select the desired settings that you

want to make. For details, refer to

Selecting the Printer Settings on

page 2-1.

When the setting is completed, press [Close]. The setting is decided, returns to the before

screen.

NOTE: To cancel the setting, press [Back]. The setting value is cleared and the previous

value is set again.

Printer

Cancel

Ready to print.

e-MPS

Printer menu

Print Sta-

tus Page

Interface

Emulation

Page Set

Others

RAM DISK

Mode

Select item.

Font

Paper

Handling

Quality

Procedure for Making Settings

1-2

Menu Hierarchical Diagram

The following is the hierarchy diagram of the menu selection system of the printer.

These items will not appear unless the printer is installed with the applicable

option unit.

e-MPS

Quick Copy User ` Job ` 1 to 999 (Set) ` Printing

Delete

Private/Stored ` User ` Job ` 1 to 999 (Set) ` ID-code `Printing

Delete

Print VMB Data Tray

Job ` Printing

List of VMB ` Printing

List of Code JOB ` Printing

Configuration ` Quick Copy ` 0 to 50 (Job)

Temporary Code

JOB Size `

0 to 9999 (MB)

Permanent Code

JOB Size `

0 to 9999 (MB)

VMB Size ` 0 to 9999 (MB)

Procedure for Making Settings

1-3

Print Menu

Print Status Page ` Printing

Interface ` Network ` Netware ` On, Off

Auto, 802.3, Ethernet II, 802.2, 802.3SNAP

TCP/IP ` On, Off

DHCP ` On, Off

BOOTP ` On, Off

IP Address ` ###.###.###.###

Subnet Mask ` ###.###.###.###

Gateway ` ###.###.###.###

AppleTalk ` On, Off

Network Status Page

On, Off

USB

Option ` Netware ` On, Off

Auto, 802.3, Ethernet II, 802.2, 802.3SNAP

TCP/IP ` On, Off

DHCP ` On, Off

BOOTP ` On, Off

IP Address ` ###.###.###.###

Subnet Mask ` ###.###.###.###

Gateway ` ###.###.###.###

AppleTalk ` On, Off

Opt. Status Page ` On, Off

Emulation ` PCL6

KPDL ` Print KPDL errors ` On, Off

KPDL (AUTO) ` Alt Emulation ` PCL6, KC-GL, Line Printer, IBM Proprinter,

Diabro 630, EPSON LQ-850

Print KPDL errors ` On, Off

KC-GL ` Pen Adjust ` Pen (1) to (8) ` 1 to 99 (dots)

Page Set ` A2, A1, A0, B3, B2, B1, B0, SPSZ

Line Printer

IBM Proprinter

Diabro 630

EPSON LQ-850

Font ` Font selection ` Font ID ` ####

Detail ` 4.00 to 999.75 (Point)

0.44 to 99.99 (CPI)

Courier Internal, Dark

Letter Gothic Internal, Dark

Code Set ` ########

Internal ` Printing

Option font ` Printing

Procedure for Making Settings

1-4

Page Set ` Copies ` 1 to 999 (Set)

Orientation ` Portrait, Landscape

Zoom(Reduce) ` Page Size ` ####

Print Size ` ####

Page Protect ` Auto, On

LF Action ` LF only, CR and LF, Ignore LF

CR Action ` CR only, CR and LF, Ignore CR

Print Quality ` KIR Mode ` On, Off

Eco Print ` On, Off

Resolution ` Fast1200 Mode, 600 dpi, 300 dpi

Print Density ` 1 to 5

Paper Handling ` MP Tray Mode ` Cassette, First

Feed Select ` 1st , 2nd paper, MP tray 3rd ,4th paper

Duplex Mode ` None, Short edge bind, Long edge bind

Paper Output ` Top tray Finisher Tray

Face down, Face up

Override A4/Letter ` On, Off

RAM Disk Mode ` On, Off

Write Data

List of Partitions ` Printing

RAM Disk Size ` 1 to 28 (MB)

Read Data ` ######## ` Enter

Read Program ` ######## ` Enter

Delete Data ` ######## ` Delete

Delete Program ` ######## ` Delete

Delete Font ` ######## ` Delete

Delete Macro ` ######## ` Delete

Hard Disk ` Write Data

List of Partitions ` Printing

Format ` Yes, No

Read Data ` ######## ` Enter

Read Program ` ######## ` Enter

Delete Data ` ######## ` Delete

Delete Program ` ######## ` Delete

Delete Font ` ######## ` Delete

Delete Macro ` ######## ` Delete

Procedure for Making Settings

1-5

Memory Card ` Write Data

List of Partitions ` Printing

Format ` Yes, No

Read Data ` ######## ` Enter

Read Program ` ######## ` Enter

Read Font ` ######## ` Enter

Read Macro ` ######## ` Enter

Delete Data ` ######## ` Delete

Delete Program ` ######## ` Delete

Delete Font ` ######## ` Delete

Delete Macro ` ######## ` Delete

Delete Language ` ######## ` Delete

Others ` Form Feed Time Out

0 to 495 (Seconds)

Resource Protect ` Off, Permanent, Permanent/Temporary

Auto Continue ` On, Off

0 to 495 (Seconds)

Finishing Error ` Proces. Duplex print

On, Off

Staple Mode ` On, Off

Service ` Print Status page ` Printing

Printer Reset ` Yes, No

Print HEX-DUMP ` Yes, No

Procedure for Making Settings

1-6

2-1

2 Selecting the Printer Settings

This chapter provides the information you need to configure this machine. In general you

need to use the operator panel only to make default settings. You can make most changes

to the printer settings using the printer driver through the application software.

NOTE: Changes to printer settings made using a software application override changes

made using the operator panel.

This chapter contains explanations on the following topics:

• Status Pages

• Changing the Interface Parameters

• Emulation Mode

• Default Font

• Print Configuration

• Setting Print Quality

• Paper Handling

• Operating the Storage Device

• e-MPS Function

• Other Modes

Selecting the Printer Settings

2-2

Status Pages

This section explains the procedure for printing the status pages. The status page is a list

of parameters and settings for most basic machine configurations. You may be required to

produce a status page when requesting service to the machine.

Press the [Print] key. The machine enters the printer mode.

Press [Printer Menu].

Press [Print Status Page].

Press [Printing].

The message Processing data

appears and the machine prints a

status page.

After the status page is printed, the display returns to the Printer menu screen.

Printer menu

Print Sta-

tus Page

Interface

Emulation

Page Set

Others

RAM DISK

Mode

Select item.

Font

Paper

Handling

Quality

Stop

Printing

Letter

Selecting the Printer Settings

2-3

Understanding the Status Page

The numbers in the following diagram refer the items explained below the diagram.

NOTE: The items and values on the status page may vary depending on the machine's

firmware version.

Selecting the Printer Settings

2-4

1 Firmware Version

This item shows the version and release date of the machine firmware.

2 Hardware Information

This item shows various machine settings for hardware-related items.

3 Memory

This shows the amount of total memory installed in the machine, the amount of

currently available memory, and the current status of the RAM disk.

4 Page Information

This shows the print resolution, number of copies, and the total page count.

5 Installed Options

This item shows the options installed in the machine.

6 Network Status

This item shows the IP address, subnet mask address, and gateway address for

the network interface card in the machine.

7 Emulation

This item shows all available emulations of the machine. The PCL6 emulation is

set as default when the machine is shipped from the factory.

8 Error Log

This item shows the last three instances of the following types of errors, listing

them in the order of occurrence:

• KPDL (PostScript) errors

• Memory overflow

• Print overrun

• File-not-found

The most recent error is displayed on the top line of the Error Log. For error

remedies, refer to

Display message on page 3-2. Error information is cleared

when the printer’s power is turned off.

9 Interface Information

This information shows the emulation and the default font for all interfaces

installed in the machine.

10 Test pattern

KIR is the original smoothing function. This test pattern shows the effect of the

KIR (Kyocera Image Refinement) system.

Page is loading ...

KYOCERA KM-3040 Operating instructions

Brand: KYOCERA

Model: KM-3040

Category: Copiers

Type: Operating instructions

This manual is also suitable for

Download PDF

report

KYOCERA KM-3040 Operating instructions

This manual is also suitable for

KYOCERA KM-3040 Operating instructions

Related papers

Other documents