Assemblyinstructions
Hose
Attachtheconnectortothecouplingandpushinuntilitlocks
intoplace(g.1).
Toremove,pressthereleasebuttonontheconnectorandpull
out(g.2).
Telescopictube(dierentaccordingtomodel)
Attachthetelescopictubetothehandgrip(g.3)
Thetelescopictubeextendstotherequiredlength(g.4).
Using the cleaning tools
Twopositioncarpet/oorbrush(NorO)
Attachtothetelescopictube(g.5)
Ecientlyremovesdustfromoors(marbleortiled),rugsor
carpets.
Pressthe“hard oors” pedal ( ) (Fig. 6): ): this position
is recommended for in-depth cleaning and oors with
pronouncedjoints;pressthe“carpets”pedal( )(Fig.7):the
brushisreadytocleanfabricsurfacesorvacuumupcoarsedirt
(e.g.largebreadcrumbs).
Themultisurfacebrush(N)(certainmodelsonly)isdesigned
tocleandelicateoors(e.g.parquet).Forthistypeofsurface,
pressthepedal( )(g.8).
Crevicetool(Fig.9)
to clean radiators, corners, edges, drawers,etc.Fit onto the
telescopictubeorhandgripandpushasfarasitwillgo.
Multipurposenozzle(g.10)
Tocleanupholsteredfurniture,mattresses,garments,carseats
etc.
Turbobrush(certainmodelsonly)(g.11)
Forin-depthcleaningoffabricsurfaces(carpetsandrugs).
Attach the turbo brush to the telescopic tube. With the
applianceon,thepassageofairmovestherotatingbrush.
Avoidvacuumingoverrugfringesastheycouldbedamagedby
themovementoftheroller.
Overfrequentuseoftheturbobrushoveralongperiodcould
damageparticularlydelicaterugsorcarpets.
Instructions
Beforeusingtheappliance,extractthepowercablecompletely
andplugintothemains.Torewindthecable,unplugandpress
thecablewindpedal (g.12).
Operation
Toturnthevacuumcleaneronando,lightlypressthepedal
switch (g.13).
Electronic suction power regulation
The electronic regulator enables suction powerto be varied
accordingtothetypeofsurfacetobecleaned.
The maximum power of the appliance can therefore be
exploitedtovacuumdustfromcarpetsorhardoors(marble,
ceramics,cotto,etc)andalowersuctionpowertocleancurtains
orotherlightfabrics.
Modelswithbuttoncontroller
Pressbuttons“+”and“-”ontheappliance(g.14)tochoose
thepowerlevel.ThecorrespondingLEDlightsup(MIN,MED,
MAX).
Models with dial controller
Turnthepowerregulationdialontheappliance(g.15).
Cleaning
EPS (Electronic Protection System) dust bag full
indicator
Theindicatorlightsupwhenthevacuumductisblockedorthe
dustbagisfull.
Quandosiaccende(g.16A),procedereallasostituzioneWhen
itcomeson(g.16A),replacethebag.Inmodelswithbutton
controller,allthreeindicatorlightsonthepowerregulator(g.
16B)comeontoshowthatthesystemisactivated.
If you continue to use the appliance after the indicator has
comeon,thevacuumpowerisreducedautomatically.Thisis
asafetydevicetoavoiddamagetothemotor.
OncethecauseleadingtheEPSsystemtointervenehasbeen
removed,turntheapplianceothenonagainbypressingthe
pedal .Thisistheonlywaytoturntheappliancebackon.
Replacingthedustbag
To change the paper dust bag, pull the bag compartment
opening lever (g. 17) and lift the cover. Remove the bag
holder(g.18).Placethebagholderoverarubbishbin,close
thebagbypullingthetabonthecardboard(g.19)anddrop
itintothebin.
Replacewithanewbag,putthebagholderbackandclosethe
dustbagcompartmentagainexertinglightpressure.
To guarantee vacuuming eciency and exploit the
full capacity of the bags, use bags authorised bythe
manufactureronly.
Youshouldchangethedustbagfrequentlywhenvacuuming
upverynedirtsuchasour,talcumpowder,etc.
Pleasenote:Theappliancehasasafetydevicewhichprevents
thedustbagcompartmentcoverbeingclosedwhenthereisno
dustbaginplace.